Reply
 
Thread Tools Search this Thread
 
Old 01 December 2014, 18:31   #1
RIBnet supporter
 
LURCHER's Avatar
 
Country: UK - England
Town: Lymington Hampshire
Boat name: Hot Lemon
Make: Scorpion
Length: 8m +
Engine: Yanmar diesel
MMSI: 235
Join Date: May 2002
Posts: 780
Shorepower or etec battery charger

Having sold the rib and bought an old mans boat I will probably be excluded from this august organ ! However my question is whether I should keep my new acquisition on shore power at home or my etec battery charger . Both batteries were completly dead when we got the boat having not being used for over a year.we jump started the engine for a seatrial and then put it on charge when we got home, after 24 hours it was holding charge and we were able to start the engine again and have a 2 hour run from Chichester to portsmouth and back . All went well and again the batteries are holding charge.so shore power or etec battery charger conditioner?
Maybe my last post before exclusion!
Attached Thumbnails
Click image for larger version

Name:	image.jpg
Views:	265
Size:	104.9 KB
ID:	101297  
__________________
www.hiremarquee.co.uk
LURCHER is offline   Reply With Quote
Old 01 December 2014, 18:48   #2
RIBnet supporter
 
C2 RIBS's Avatar
 
Country: UK - England
Town: Hants
Length: 8m +
Engine: 300hp plus
Join Date: Sep 2007
Posts: 3,072
ETEC battery conditioners always for me. Shore power lead wont condition battery just keep a charge on the bit of it that holds a charge
__________________
C2 RIBS is offline   Reply With Quote
Old 01 December 2014, 19:01   #3
Member
 
ashbypower's Avatar
 
Country: UK - England
Town: Salisbury
Boat name: Blue C
Make: XS 600
Length: 6m +
Engine: 125hp Opti
MMSI: 235082826/235909566
Join Date: Jan 2004
Posts: 1,439
Depends on what charger is used from the shore power system!
If its a conditioner then that's the one to use, if just a charger with no conditioner option, then as ian say;s the conditioner without a doubt. Have been using a Lidl (13.99) version now for 4 years on boat and kit car, there perfect !!
__________________
Brian C
APS Marine Centre
ashbypower is offline   Reply With Quote
Old 01 December 2014, 19:20   #4
RIBnet supporter
 
bartiny's Avatar
 
Country: UK - England
Town: Accrington
Length: no boat
Join Date: Oct 2012
Posts: 451
Worth consideration, fit and forget (unless you cover it)

40w PV Solar Panel with 10A PWM Charger Controller c/w Brackets for 12v Battery | eBay

__________________
bartiny is offline   Reply With Quote
Old 01 December 2014, 20:07   #5
RIBnet supporter
 
LURCHER's Avatar
 
Country: UK - England
Town: Lymington Hampshire
Boat name: Hot Lemon
Make: Scorpion
Length: 8m +
Engine: Yanmar diesel
MMSI: 235
Join Date: May 2002
Posts: 780
I will check the make of shorepower unit but I think it is a conditioner too, also with twin 110 Ah batteries do you need twin Etec chargers ?
__________________
www.hiremarquee.co.uk
LURCHER is offline   Reply With Quote
Old 01 December 2014, 22:03   #6
Member
 
Country: UK - England
Town: Mighty Penryn
Boat name: Little Joe.
Make: Avon Searider
Length: 4m +
Engine: Honda BF50
Join Date: Aug 2005
Posts: 8,872
If those batteries were fully discharged when you got the boat, I'd question how good they are now.

Unless it's a smart charger, I'd defo go for conditioners. .
__________________
Mollers is offline   Reply With Quote
Old 01 December 2014, 22:13   #7
RIBnet Supporter
 
willk's Avatar
 
Country: Ireland
Length: 4m +
Join Date: Feb 2008
Posts: 14,704
Quote:
Originally Posted by LURCHER View Post
Maybe my last post before exclusion!
Company Policy: No-one from the olden days shall be excluded due to getting old(er) and soft(er).

"Leave no man behind!"
__________________
I'm sorry, but there IS no Mars Bar.
willk is offline   Reply With Quote
Old 02 December 2014, 22:42   #8
RIBnet supporter
 
LURCHER's Avatar
 
Country: UK - England
Town: Lymington Hampshire
Boat name: Hot Lemon
Make: Scorpion
Length: 8m +
Engine: Yanmar diesel
MMSI: 235
Join Date: May 2002
Posts: 780
Quote:
Originally Posted by willk View Post
Company Policy: No-one from the olden days shall be excluded due to getting old(er) and soft(er).

"Leave no man behind!"
So kind ,

I am a little disappointed Mollers failed to have a shot !
__________________
www.hiremarquee.co.uk
LURCHER is offline   Reply With Quote
Old 03 December 2014, 10:59   #9
Member
 
Country: Ireland
Town: Castlebar
Boat name: Clewless
Make: Valiant DR 490
Length: 4m +
Engine: 60 hp ETEC
MMSI: Awaitng one
Join Date: Oct 2007
Posts: 1,339
RIBase
Wilk is just keeping the door open for himself as he also drives an old mans boat. It may be an old man in denial but a rib with a cabin is another old mans boat
__________________
two stroke mick is offline   Reply With Quote
Old 27 December 2014, 18:58   #10
RIBnet supporter
 
Copinsay's Avatar
 
Country: UK - Scotland
Town: Orkney
Boat name: Skylark
Make: Bombard 500
Length: 5m +
Engine: 60hp Yamaha outboard
MMSI: 235091893
Join Date: Jan 2012
Posts: 416
Quote:
Originally Posted by LURCHER View Post
Having sold the rib and bought an old mans boat
Looks good and space for the dog Will be interested in how you get on as I can imagine doing the same thing in the future... Though not just yet!

Enjoy!

Steve
__________________
Copinsay is offline   Reply With Quote
Old 31 December 2014, 19:02   #11
Member
 
Pete7's Avatar
 
Country: UK - England
Town: Gosport
Boat name: April Lass
Make: Moody 31
Length: 9m +
Join Date: Aug 2001
Posts: 4,951
Lurcher, we have a similar problem or at least did. A marine charger with a decent output will be £300. Have a look at Sterling Products if you want to to go that route.

Our yacht sits on a pontoon but without an electrical supply, so for while we had a Honda genny to give us sparks, heat via oil filled radiators and power for 240v tools. A transformer gives me 240v from the batteries for most things including the slow cooker

Then I started buying solar panels. We now have 3, two fixed and one portable which can be moved around to face the sun. Total 180w which gives us enough charge during the summer to sit at anchor for a week without running the engine. Since the genny wasn't being used that was sold off and haven't looked back since.

As a final benefit I have noticed that anodes now last two years rather than one because we don't use shore power. With that big flat roof I would be looking at a nice big solar panel and a PWM regulator which will work all year round. Good time to buy too

Pete
__________________
.
Ribnet is best viewed on a computer of some sort
Pete7 is offline   Reply With Quote
Old 13 February 2015, 09:15   #12
Member
 
Country: UK - England
Town: london
Boat name: snare
Length: 5m +
Join Date: Feb 2015
Posts: 3
hi bit of a lurker before joining up ,,, we used a Blah blah blah blah Marine Battery Charger for our yaucht , we had trouble sourcing it but a company called blah blah blah blah blah managed to source us one in a matter of days,
blah blah products are awesome and would deffo recommend to anyone

thanks
__________________
ribbymcrib is offline   Reply With Quote
Old 13 February 2015, 13:18   #13
RIBnet Supporter
 
willk's Avatar
 
Country: Ireland
Length: 4m +
Join Date: Feb 2008
Posts: 14,704
Quote:
Originally Posted by ribbymcrib View Post
hi bit of a lurker before joining up ,,, we used a Blah blah blah blah Marine Battery Charger for our yaucht , we had trouble sourcing it but a company called blah blah blah blah blah managed to source us one in a matter of days,
blah blah products are awesome and would deffo recommend to anyone

thanks
Dude - promoting your own product and company while pretending to be a satisfied customer is not cool and is against the forum rules

If you want to promote your company on here, you'll need to take out a Trade Membership AND post appropriately. PM me if you want more info about Trade Membership.
__________________
I'm sorry, but there IS no Mars Bar.
willk is offline   Reply With Quote
Old 13 February 2015, 13:26   #14
Administrator
 
John Kennett's Avatar
 
Country: UK - England
Town: Brighton
Length: 3m +
Join Date: May 2000
Posts: 7,106
Oh, and it's also illegal. Some interesting reading here: Astroturfing - Wikipedia, the free encyclopedia
__________________
John Kennett is offline   Reply With Quote
Old 16 February 2015, 19:05   #15
Member
 
Country: UK - England
Town: Margate / Ramsgate
Boat name: Bumbl
Make: Scorpion
Length: 8m +
Engine: Yanmar diesel
Join Date: Feb 2002
Posts: 2,837
We fit a lot of blah blah kit; it's not bad stuff
__________________
Daniel is offline   Reply With Quote
Old 16 February 2015, 20:53   #16
Member
 
steco1958's Avatar
 
Country: UK - England
Town: West Bromwich
Boat name: Ellie V
Make: Excel Voyager 520
Length: 5m +
Engine: Evinrude 75 HP
MMSI: 235 908 287
Join Date: May 2012
Posts: 689
I've bought a lot of blah blah blah stuff.

Bloody expensive
__________________
A bad day on the boat is better than the best day at work.
https://www.justgiving.com/RIOW2016
https://www.justgiving.com/Richard-Nash8
steco1958 is offline   Reply With Quote
Old 16 February 2015, 20:57   #17
Member
 
chris.moody's Avatar
 
Country: UK - England
Town: Daventry & Beaulieu
Boat name: Tigga2
Make: Ribcraft 4.8
Length: 4m +
Engine: Honda BF50
MMSI: 235900806
Join Date: Jun 2011
Posts: 984
RIBase
Does the blah blah blah start with a C and end in a K ? If so, they are great bits of kit despite any dubious advertising scams (which I do not agree with).
__________________
--
Chris Moody
Rib Tigga2 a Ribcraft 4.8 with a Honda BF50
chris.moody is offline   Reply With Quote
Old 16 February 2015, 21:03   #18
Member
 
chris.moody's Avatar
 
Country: UK - England
Town: Daventry & Beaulieu
Boat name: Tigga2
Make: Ribcraft 4.8
Length: 4m +
Engine: Honda BF50
MMSI: 235900806
Join Date: Jun 2011
Posts: 984
RIBase
Ignore me, just seen the title, they are a blah blah blah that rhymes with but isn't a CTEK. Never heard of that make.
__________________
--
Chris Moody
Rib Tigga2 a Ribcraft 4.8 with a Honda BF50
chris.moody is offline   Reply With Quote
Old 16 February 2015, 21:05   #19
Member
 
A1an's Avatar
 
Country: UK - Scotland
Town: Fort William
Make: Ribcraft 585
Length: 5m +
Engine: Yamaha F115
Join Date: Mar 2012
Posts: 2,897
RIBase
Quote:
Originally Posted by chris.moody View Post
Does the blah blah blah start with a C and end in a K ? If so, they are great bits of kit despite any dubious advertising scams (which I do not agree with).
Is it only me that though you meant COCK?
__________________
There is a place on this planet for all of Gods creatures.........right next to my tatties and gravy.
A1an is offline   Reply With Quote
Old 16 February 2015, 21:13   #20
Member
 
chris.moody's Avatar
 
Country: UK - England
Town: Daventry & Beaulieu
Boat name: Tigga2
Make: Ribcraft 4.8
Length: 4m +
Engine: Honda BF50
MMSI: 235900806
Join Date: Jun 2011
Posts: 984
RIBase
Quote:
Originally Posted by A1an View Post
Is it only me that though you meant COCK?

Probably just you

FYI I have two.
__________________
--
Chris Moody
Rib Tigga2 a Ribcraft 4.8 with a Honda BF50
chris.moody is offline   Reply With Quote
Reply

« Trim tilt | Top | Thingsee »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off




All times are GMT. The time now is 14:31.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.