Hull wanted for 6m RIB project!

Zagato · 12 September 2011, 07:08

I'll put this out to see if anything comes up as I would think about doing a rebuild if a decent hull came along (restore hull, add new tubes etc!) I would like a hull for a 6m RIB. Must be a deep v hull. A Tornado or Humber Destroyer hull or similar would be ideal. Many thanks

skippermarky · 12 September 2011, 14:38

It might be worth contacting leeway ribs on the isle of wigit, he is selling up, he has a hull advertised on ebay at the moment, so you never know, good luck

Alzi · 12 September 2011, 16:13

Needs a little TLC..

Boats And Vessels HUMBER RIB

add 1 of these , a bit of cutting and a bit of glue !!

http://www.ebay.co.uk/itm/Large-Infl...11213205108744

Zagato · 12 September 2011, 17:42

"Skipper" thanks I'll give them a call

Alzi if that was a 5.8 or 6m it would be ideal with a haggle

& those are serious dinghy tubes

ribraff · 12 September 2011, 18:59

Isn't the bottom missing out of that Dinghy!