Tohatsu sender location

[nw04jen]

Hello
Just bough the Tohatsu sender - cannot find where to afix it? Cannot find any instructions or sensible schematic online - any help gratefully received - its a plastic piece with cable - no issue routing cable to gauge just cannot see where to screw the sender
https://drive.google.com/file/d/1b_H...ew?usp=sharing

[spartacus]

Trim sender fixes to the inside saddle of the outboard near the power trim. It's spring loaded so sends signal to the trim gauge as the engine is raised. From there - it should connect to the engine loom then onto the gauge.

[Barrel Rider]

Top right of the transom bracket