Reply
 
Thread Tools Search this Thread
 
Old 20 December 2010, 07:25   #21
Member
 
BeetleBug's Avatar
 
Country: Norway
Town: Norway/Oslo
Make: Humber
Length: 6m +
Engine: Suzuki
Join Date: Nov 2005
Posts: 40
Quote:
Originally Posted by T 15 View Post
All over covers, my brothers came with his rib from Humber but mine was made in N Ireland but dont know where, it was an after product via a boat dealer ( about 7 years ago ) & is showing a good few signs of age......!!!!!!!

If I was to get another all over cover, it would be the "lighter cloth type material" as its a lot easier to fold up/store etc also it you tow the rib with the heavy "pvc" cover on the rib it does cause scuff marks on whatever it rubs on. NOT trying to put u off the pvc, just telling what we have found by use,
I probably have the same heavy duty PVC type as you for my Humber and I agree, they are only good for winter storage and are way to heavy to wrap around the boat after use during the summer. If you keep it clean the snow will slide off which is good. And yes, do NOT use them when towing. It will, as mentioned, rub and scratch your consoles, the paint on the engine etc etc.

Best rgs
BB
__________________
BeetleBug is offline   Reply With Quote
Old 20 December 2010, 10:17   #22
RIBnet supporter
 
gotchiguy's Avatar
 
Country: UK - England
Town: Dinard, Brittany
Boat name: Into the Red
Make: Osprey Vipermax
Length: 7m +
Engine: Evinrude E-tec 250HO
MMSI: 235 076 114
Join Date: Apr 2009
Posts: 1,957
RIBase
Hi, Just a quick tip:

When we bought our boat the dealer gave us a very wise pointer: Never, ever put the console cover underneath a full cover if left outside. The wind will quickly chafe the outer cover by rubbing it on the console cover. We have seen it done since, and it can really cause some nasty tears. Just a word of advice

Oh, and to the OP, I agree, look in Yellow Pages & find a local agricultural seamstress outfit
__________________
gotchiguy is offline   Reply With Quote
Old 20 December 2010, 12:02   #23
Member
 
BeetleBug's Avatar
 
Country: Norway
Town: Norway/Oslo
Make: Humber
Length: 6m +
Engine: Suzuki
Join Date: Nov 2005
Posts: 40
Or you can do as me and wrap the engine, seats and the console in protective layers of plastic first. No damages even though we have had quite a lot of snow the last winters.

At sea I wrap the console and the seats with a cover made for a ATV. Very cheap and light. It does the job.

Best rgs
BB
Attached Thumbnails
Click image for larger version

Name:	Humber1.jpg
Views:	186
Size:	92.1 KB
ID:	56134   Click image for larger version

Name:	Humber2.jpg
Views:	204
Size:	87.6 KB
ID:	56135   Click image for larger version

Name:	Humber3.jpg
Views:	215
Size:	79.9 KB
ID:	56136  
__________________
BeetleBug is offline   Reply With Quote
Old 20 December 2010, 18:38   #24
Member
 
Hightower's Avatar
 
Country: UK - England
Town: Fareham
Length: 6m +
Join Date: Sep 2003
Posts: 7,866
Quote:
Originally Posted by BeetleBug View Post
Or you can do as me and wrap the engine, seats and the console in protective layers of plastic first. No damages even though we have had quite a lot of snow the last winters.

At sea I wrap the console and the seats with a cover made for a ATV. Very cheap and light. It does the job.

Best rgs
BB
Should have wraped the roof of you house too! Would have kept all those weeds from growing
__________________
Andy

Looks Slow but is Fast
Member of the ebay Blue RIB cover club.
Hightower is offline   Reply With Quote
Old 21 December 2010, 08:25   #25
Member
 
BeetleBug's Avatar
 
Country: Norway
Town: Norway/Oslo
Make: Humber
Length: 6m +
Engine: Suzuki
Join Date: Nov 2005
Posts: 40
Quote:
Originally Posted by Hightower View Post
Should have wraped the roof of you house too! Would have kept all those weeds from growing


Not a house, just a cabin. But 8" of weed on the roof is probably the best isolation you can use. It helps when we have around 6 feet of snow.

BB
__________________
BeetleBug is offline   Reply With Quote
Old 21 December 2010, 08:51   #26
Member
 
T 15's Avatar
 
Country: UK - N Ireland
Town: Bangor, Co Down
Boat name: Ribeye & Tremlett 15
Make: Ribeye & Tremlett 15
Length: 4m +
Engine: Yamaha F40, Merc 500
Join Date: Jul 2010
Posts: 265
Quote:
Originally Posted by gotchiguy View Post

a very wise pointer: Never, ever put the console cover underneath a full cover if left outside. The wind will quickly chafe the outer cover by rubbing it on the console cover.

VERY GOOD POINT, I FORGOT all about this, the guy who made my console cover ( Irish Spars ) also told me NOT to do this too, in fact he said never have it below at any time, storage or towing...sorry for not putting it into an earlier post.
__________________
T 15 is offline   Reply With Quote
Old 21 December 2010, 20:37   #27
CJL
Member
 
CJL's Avatar
 
Country: UK - England
Town: London/Oxford
Make: Ribcrafts
Length: 5m +
Engine: 150hp/2x115hp
MMSI: 235090215
Join Date: Oct 2002
Posts: 2,241
RIBase
Send a message via Skype™ to CJL
Make your own - a Whitbread 60 sail cover works quite well !!

Chris
Attached Thumbnails
Click image for larger version

Name:	cropped13032008229.jpg
Views:	157
Size:	59.8 KB
ID:	56170  
__________________
CJL is offline   Reply With Quote
Old 21 December 2010, 20:40   #28
Member
 
Country: UK - England
Town: Mighty Penryn
Boat name: Little Joe.
Make: Avon Searider
Length: 4m +
Engine: Honda BF50
Join Date: Aug 2005
Posts: 8,872
Quote:
Originally Posted by CJL View Post
Whitbread
Now there's a blast from the past.
My Old Man was always partial to a pint of 'Thitbread Wankard'.
__________________
Mollers is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off




All times are GMT. The time now is 06:04.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.