Go Back   RIBnet Forums > RIB talk > Engines & props
Click Here to Login

Reply
 
Thread Tools Search this Thread
 
Old 13 February 2020, 13:10   #1
Member
 
Country: UK - England
Town: West Sussex
Length: no boat
Join Date: Oct 2002
Posts: 3,872
Zipwake – dynamic trim control system

Just had a pair of Interceptors 300 Series installed on my Parker 800 Baltic. The installation was done by Andy from the Sussex Boat Shop Group. Andy did a superb job. With twin diesel stern drive engines and two long range fuel tanks she was always heavy on the stern and took a bit too long for my liking to get onto the plane. Trim tabs were the answer only no space to fit them. Last months during my visit to the factory to discuss a new built I noticed that these were being fitted to some of the Parker boats. When I got back to the UK and made some measurements on the transom and looking up the product on the internet a quick decision was made. A week later a set of interceptors arrived. These were only fitted on Tuesday and yesterday I took the rib out into Southampton waters and out to Cowes and back. The zipwake interceptor system is fully automatic and is connected to the GPS on the rib. You must input the length, beam and weight of the craft. The weight can be modified pending how many passengers on board. I was amazed how much the performance was improved especially getting onto plane and this was immediately upon acceleration. I topped up an extra 200 ltrs of fuel in Cowes and this extra weight made no difference. I am now keen to test with a full load of 8/10 passengers but this will have to wait till better weather conditions say T-shirt weather
Attached Thumbnails
Click image for larger version

Name:	IMG_4351.jpg
Views:	283
Size:	104.0 KB
ID:	132125   Click image for larger version

Name:	IMG_4366.jpg
Views:	628
Size:	78.3 KB
ID:	132126   Click image for larger version

Name:	IMG_4388.jpg
Views:	269
Size:	84.2 KB
ID:	132127  
__________________
Andre
Andre is offline   Reply With Quote
Old 13 February 2020, 13:43   #2
Member
 
Country: UK - England
Town: Retford
Boat name: Spy-sea-one
Make: Excel 435
Length: 4m +
Engine: Suzuki Outboard/25/4
Join Date: Oct 2011
Posts: 7,454
RIBase
never seen these before so googled very interesting how just 30mm of blade causes enough to compensate at the side of trim tabs which are not as efficient.
__________________
jeffstevens763@g is offline   Reply With Quote
Old 13 February 2020, 20:40   #3
Member
 
Country: UK - England
Town: Waterlooville
Boat name: Tickler
Make: Halmatic P22
Length: 6m +
Engine: Inboard Diesel 240HP
MMSI: 235115642
Join Date: Sep 2015
Posts: 1,777
RIBase
Are they trim only or will they do heel as well.
__________________
GuyC is offline   Reply With Quote
Old 14 February 2020, 07:29   #4
Member
 
Country: UK - England
Town: West Sussex
Length: no boat
Join Date: Oct 2002
Posts: 3,872
Quote:
Originally Posted by GuyC View Post
Are they trim only or will they do heel as well.
You will find loads of information here Zipwake | Dynamic Trim-Control System
__________________
Andre
Andre is offline   Reply With Quote
Old 14 February 2020, 08:16   #5
Member
 
Country: UK - England
Town: Waterlooville
Boat name: Tickler
Make: Halmatic P22
Length: 6m +
Engine: Inboard Diesel 240HP
MMSI: 235115642
Join Date: Sep 2015
Posts: 1,777
RIBase
Sorry, I was being lazy. I've come across the Humphree system before albeit on fast ferries and I know you can get different configurations - manual, automatic trim control and full ride control.

I've now had a look and yes, depending on what system you choose you can get full ride control with the Zipwake.

Interestingly both Humphree and Zipwake are based in Sweden.
__________________
GuyC is offline   Reply With Quote
Old 14 February 2020, 08:38   #6
Member
 
Country: UK - England
Town: West Sussex
Length: no boat
Join Date: Oct 2002
Posts: 3,872
Quote:
Originally Posted by GuyC View Post
Sorry, I was being lazy. I've come across the Humphree system before albeit on fast ferries and I know you can get different configurations - manual, automatic trim control and full ride control.

I've now had a look and yes, depending on what system you choose you can get full ride control with the Zipwake.

Interestingly both Humphree and Zipwake are based in Sweden.
well I have the S series and have only being out once so still new with it but love it
__________________
Andre
Andre is offline   Reply With Quote
Old 14 February 2020, 11:40   #7
Member
 
Last Tango's Avatar
 
Country: UK - Scotland
Town: Denny
Boat name: Highland Bluewater
Length: 6m +
Join Date: Mar 2013
Posts: 1,647
Mate's Zipwake system failed last trip out. One of the interceptors stuck down so he had to limp about 10 mls back back to the marina where it mysteriously started working again.

Now a "trust" issue.
__________________
Last Tango is offline   Reply With Quote
Old 14 February 2020, 18:51   #8
Member
 
Country: UK - Scotland
Town: denny
Boat name: breezy
Make: northcraft
Length: 6m +
Engine: honda 150
Join Date: May 2016
Posts: 888
RIBase
Quote:
Originally Posted by Last Tango View Post
Mate's Zipwake system failed last trip out. One of the interceptors stuck down so he had to limp about 10 mls back back to the marina where it mysteriously started working again.

Now a "trust" issue.
and he was constantly having to piss about adjusting it
__________________
breezeblock is offline   Reply With Quote
Old 14 February 2020, 21:18   #9
Member
 
Country: USA
Town: CA
Make: Zodiac RIB-P
Length: 7m +
Engine: Suzuki 250
Join Date: Aug 2010
Posts: 1,235
Cool, I was looking into these for my next boat build. Looks a little less obtrusive than the classic trim tabs.

I’d say one “failure” is not a reason to throw them under the bus.

Jaso
__________________
Bigtalljv is offline   Reply With Quote
Old 15 February 2020, 22:28   #10
Member
 
Country: UK - Scotland
Make: HumberOceanOffshore
Length: 8m +
Engine: Volvo KAD300/DPX
Join Date: Oct 2002
Posts: 5,596
Volvo Penta have been using this type of tab for many years.
https://www.volvopenta.com/marinelei...im-system.html

Personally, I prefer long tabs - as in projecting rearwards a distance - because, as well as adding lift, they effectively lengthen the hull, plus the lift is more effective because the lever (tab) is longer.
However, if there's no space for conventional tabs these could be a satisfactory solution. I can see that covering the whole width of the transom would generate a lot of lift and give a pretty comprehensive trim control.
__________________
JW.
jwalker is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off




All times are GMT. The time now is 21:54.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.