Wanted: 3 x 14 x 21 stainless prop

[xpertski]

Hi all,

Looking for a stainless 3 x 14 x 21 prop for my 2004 Suzuki 140hp.

Anyone have a spare stainless that would suit or can recommend where to look? Would consider other prop pitches as well.

Current prop is a 3x14x21 (see pictures) which is the only reason I’m mentioning that size. Usually travel with 2-4 people in a 6.3m Humber ocean pro, very occasionally 6 people aboard.

Thanks everyone in advance!

[xpertski]

Sorry my photos were invalid file types so can’t upload but you get the just above, thanks!

[Pikey Dave]

Originally Posted by xpertski

Hi all,



Looking for a stainless 3 x 14 x 21 prop for my 2004 Suzuki 140hp.



Anyone have a spare stainless that would suit or can recommend where to look? Would consider other prop pitches as well.



Current prop is a 3x14x21 (see pictures) which is the only reason I’m mentioning that size. Usually travel with 2-4 people in a 6.3m Humber ocean pro, very occasionally 6 people aboard.



Thanks everyone in advance!

I have a genuine Suzuki 14x20 in as new condition, only used for testing. If that’s of interest.

[xpertski]

Hi Dave, yes it would, do you want to PM me with how much you would take for it? Cheers

[telcowilliam]

Dave if this doesn’t go I would be interested in trying out on my rib next time your down at ty calch cheers mike

[Pikey Dave]

Originally Posted by telcowilliam

Dave if this doesn’t go I would be interested in trying out on my rib next time your down at ty calch cheers mike

[emoji106] will do Mike

[Roflhat]

I’ve got a 12.5x21, should work on a lightish boat

[xpertski]

Originally Posted by Roflhat

I’ve got a 12.5x21, should work on a lightish boat

Thanks, probably a bit small in diameter though, current being a 14”.

[boristhebold]

I have the following, but would need to be picked up in person.

Props
1 x Aluminium Prop, White, 3 blade, 13 3/4 diameter by 19 pitch, used, white paint worn, yamaha fitting, slight rough edge on blades, still good to use £40.00

1 x Stainless Steel Mercury Marine Laser 2 Prop, 3 blade, diameter I think is 14 1/4 but could be slightly smaller by 21 pitch code on prop 48-16546, used slight rough edge on blades, yamaha fitting centre bit included £70.00

1 x Stainless steel yamaha prop, 3 blade, very low use, was on a demo boat for a show, excellent condition, no dings, no rough edges, perfect, I purchased from a business closing down, fitted and found it too large as the blades were too close to cavation plate on engine, I have never had this one in the water, 15 1/4 diameter by 19 pitch £155.00

[boristhebold]

pics of props

[xpertski]

Hi Boris, what boats were they used on? The Laser 2 prop could be of interest, think it’s diameter from online is 13 7/8” diameter so I guess not much change on a 14” so could be suitable for the 140hp Suzuki. You mention slight rough edges? How might that be resolved?

The diameter on the larger one may be a bit big for my suz 140

Thanks

[boristhebold]

Hi the rough edges are pretty much superficial could be sorted with a small file (I think), when I took the picture I made sure the worst rough edge was showing on the right blade (so look cloesly at the picture), it really isnt that bad at all. Ive had it in my man cave for a number of years I think I bought it a long time ago from someone who didnt need it, I had it on my yamaha 2 stroke 200hp HPDI for some time and it was fine, it wasn't the correct prop for that engine the difference was bigger hole shot and acceleration but slightly lower top end than a standard prop for that engine. If other than a yam engine it may need an adapter im not sure.

[Bucksribster]

I have a near perfect Suzuki 3x14x23 ali prop. Will fit your DF140. Let me know if interested.

[xpertski]

Hi Boris and Bucks, sent you both PMs

[xpertski]

Thanks all, I’m considering a couple of props now, though ideally a good condition 21” Suzuki stainless is surplus somewhere ...