Wanted: Rigging tube and bulkhead fitting.

[Nasher]

Looking for @1M of Rigging hose and the Bulkhead fitting/Grommet that it screws into.

Thought I'd ask before splashing out over £30 on ebay, somebody may want to turn some garage junk into fuel money.

Similar to this:
MERCURY Rigging Tube + Bulkhead Fitting Screw Conduit Outboard Motor Engine Boat | eBay

Thanks

Nasher.

[falcon0310]

I've got 63 mm tube

[Nos4r2]

Originally Posted by Nasher

Looking for @1M of Rigging hose and the Bulkhead fitting/Grommet that it screws into.

Thought I'd ask before splashing out over £30 on ebay, somebody may want to turn some garage junk into fuel money.

Is it for the Suzi mate? If it is, you're probably better off checking the diameter you need first I don't think they're all the same and it'll be a bugger to stop a larger tube falling off the outboard end.

On my Opti, that tube is quite a snug fit on the motor end.

[Nasher]

Hello Nos.

Yep, it’s for the Suzi, just trying to tidy it up a bit.

Because of the way the cables etc enter the engine I can use either of the common sizes, 50mm or 63mm, although the 63mm would be better.

Falcon
Thanks, It looks like I’ve got hold of a bit of tube, but really want the bulkhead fitting that it fits into.
I can turn one up in my lathe, but am being lazy.

Nasher.