Reply
 
Thread Tools Search this Thread
 
Old 04 February 2012, 09:20   #21
Member
 
Nick Hearne's Avatar
 
Country: UK - England
Town: Bucks
Boat name: Blue & Ding Dong
Make: Ribeye,SR4 & Bombard
Length: 6m +
Engine: 115,50 & 15Hp Yams
Join Date: Feb 2004
Posts: 3,252
I have the smaller one of these & it works very well
Folding Ladder for Inflatable Dinghy
__________________
Member of the Ribeye supporters club!!!
Member of Bombard 380 Aerotec club
Member of SR4 club
Nick Hearne is offline   Reply With Quote
Old 04 February 2012, 11:32   #22
Member
 
Country: Denmark
Town: Odense
Boat name: ViBe'N
Make: Humber Destroyer
Length: 6m +
Engine: Outboard/petrol 115
MMSI: 219015941
Join Date: Jan 2012
Posts: 9
RIBase
If you turn off the engine, it is quite a good ladder.

Bent P. / DK
__________________
Kind regards

Bent P.
Bent Pedersen is offline   Reply With Quote
Old 04 February 2012, 11:49   #23
Member
 
Country: UK - England
Town: Hazlemere
Boat name: FEEFO
Make: Bombard Aerotec 380
Length: 3m +
Engine: Outboard Mariner 25
Join Date: Aug 2010
Posts: 68
Quote:
Originally Posted by actions View Post
My only concern would be if the entire ladder folds around your foot when you climb onto it, making it virtually impossible to get your foot on the next rung, where as the solid ones obviously stay flat?
The feedback is good though.
Got one last year for my Bombard and they are a nightmare to use because as you push to climb up, the ladder goes under the hull and away from you. you just end up laying on your back in the water.

One of the other guys on the lake I was at something very similar to the plastimo but without the bottom step - the key to it was that it was solid and halfway down bent away from the boat, the bend was still at mid tube level and therefore very stable.

It attached to the rail along the top of the tube with a couple of flexible straps

all good except he got it with his boat and I havent been able to find one anywhere yet!!!!
__________________
Member of Bombard 380 Aerotec club
Mariner 25hp
Bloody expensive wheels!
Bongy is offline   Reply With Quote
Old 04 February 2012, 11:56   #24
Member
 
Country: UK - England
Town: Hazlemere
Boat name: FEEFO
Make: Bombard Aerotec 380
Length: 3m +
Engine: Outboard Mariner 25
Join Date: Aug 2010
Posts: 68
Quote:
Originally Posted by Nick Hearne View Post
I have the smaller one of these & it works very well
Folding Ladder for Inflatable Dinghy
Thats 'em!!!!!!!!

Cheers Nick - would the short one be 'long enough' for small kids?
__________________
Member of Bombard 380 Aerotec club
Mariner 25hp
Bloody expensive wheels!
Bongy is offline   Reply With Quote
Old 04 February 2012, 12:12   #25
Member
 
Nick Hearne's Avatar
 
Country: UK - England
Town: Bucks
Boat name: Blue & Ding Dong
Make: Ribeye,SR4 & Bombard
Length: 6m +
Engine: 115,50 & 15Hp Yams
Join Date: Feb 2004
Posts: 3,252
Quote:
Originally Posted by Bongy View Post
Thats 'em!!!!!!!!

Cheers Nick - would the short one be 'long enough' for small kids?
I have used it on my old 5.75 Viper, 4m SR & Bombard 380 Aerotec with my kids with no plrolem using the smaller one, very happy with it.
__________________
Member of the Ribeye supporters club!!!
Member of Bombard 380 Aerotec club
Member of SR4 club
Nick Hearne is offline   Reply With Quote
Old 04 February 2012, 15:32   #26
Member
 
Country: Canada
Town: Richmond, B.C.
Boat name: ZAP
Make: Zodiac
Length: 4m +
Engine: 70 HP Tohatsu
Join Date: Jul 2007
Posts: 58
After trying several types of ladder, I finally found this one to be the answer.
St. Croix Stainless Folding Ladder.
St. Croix stainless Folding Ladder by St Croix
Attached Thumbnails
Click image for larger version

Name:	St Croix Stainless Folding Ladder.jpg
Views:	307
Size:	72.7 KB
ID:	65363  
__________________
Have a good time, the Sun can't shine every day.
solos60 is offline   Reply With Quote
Old 04 February 2012, 17:31   #27
Member
 
actions's Avatar
 
Country: UK - England
Town: Herne Bay
Boat name: Red May
Make: Zodiac
Length: 4m +
Engine: 40hp Honda 4 Stroke
MMSI: Is quite long
Join Date: Jun 2010
Posts: 653
Send a message via Skype™ to actions
Quote:
Originally Posted by Nick Hearne View Post
I have the smaller one of these & it works very well
Folding Ladder for Inflatable Dinghy
Perfik... But sold out. Bugger.
__________________
actions is offline   Reply With Quote
Old 04 February 2012, 17:49   #28
Member
 
mick's Avatar
 
Country: UK - England
Town: Wakefield
Boat name: Bouncer
Make: Redbay Stormforce
Length: 6m +
Engine: 2x Honda 100 Hp
MMSI: 235025718
Join Date: Jun 2009
Posts: 4,175
Quote:
Originally Posted by actions

Perfik... But sold out. Bugger.
Bit pricey mine was £15 I like the look of the stainless one
__________________
mick is offline   Reply With Quote
Old 04 February 2012, 18:08   #29
Member
 
actions's Avatar
 
Country: UK - England
Town: Herne Bay
Boat name: Red May
Make: Zodiac
Length: 4m +
Engine: 40hp Honda 4 Stroke
MMSI: Is quite long
Join Date: Jun 2010
Posts: 653
Send a message via Skype™ to actions
Yes i agree the stainless one looks nice but its not in the country and i bet thats even more expensive. Oh well, looks like i might have to get this one Aluminium Folding Ladder if the other store arent getting them anytime soon. I shall email them and see what they say. By the looks of it they are virtually the same except the price.
__________________
actions is offline   Reply With Quote
Old 04 February 2012, 19:24   #30
Member
 
Country: UK - England
Town: Hazlemere
Boat name: FEEFO
Make: Bombard Aerotec 380
Length: 3m +
Engine: Outboard Mariner 25
Join Date: Aug 2010
Posts: 68
Quote:
Originally Posted by actions View Post
Perfik... But sold out. Bugger.
the longer ones are in stock
__________________
Member of Bombard 380 Aerotec club
Mariner 25hp
Bloody expensive wheels!
Bongy is offline   Reply With Quote
Old 04 February 2012, 19:45   #31
Member
 
mister p's Avatar
 
Country: UK - England
Town: LONDON
Make: SR4/ZODIAC/3D
Length: 4m +
Engine: 30T/40T
Join Date: Oct 2011
Posts: 1,433
Honestly chaps, if there's someone on board then hold the 'victim' under the armpits, get them to hold their breath, then it's "one" and dunk, "two" and dunk, and up onto the sponson on "three".
It's fun, it works and you don't need a ladder.
Get on with it.
It also helps with MOB when a ladder isn't always to hand.
Give it a go......it's good. Get's them involved.
__________________
mister p is offline   Reply With Quote
Old 04 February 2012, 19:57   #32
SPR
Member
 
SPR's Avatar
 
Country: UK - Scotland
Town: Central Belt of Scotland
Boat name: Puddleduck III
Make: Bombard
Length: 5m +
Engine: 50 HP
Join Date: Mar 2009
Posts: 2,066
Quote:
Originally Posted by mister p
Honestly chaps, if there's someone on board then hold the 'victim' under the armpits, get them to hold their breath, then it's "one" and dunk, "two" and dunk, and up onto the sponson on "three".
It's fun, it works and you don't need a ladder.
Get on with it.
It also helps with MOB when a ladder isn't always to hand.
Give it a go......it's good. Get's them involved.
a boat hook gets your greater depth ! and makes things easier....lol

S.

Ps. don't try this on a boat!
__________________
SPRmarine / SPRtraining
RYA Training Courses & Safety Equipment Sales
SPR is offline   Reply With Quote
Old 04 February 2012, 20:09   #33
Member
 
mister p's Avatar
 
Country: UK - England
Town: LONDON
Make: SR4/ZODIAC/3D
Length: 4m +
Engine: 30T/40T
Join Date: Oct 2011
Posts: 1,433
If you leave the vessel voluntarily.........make sure that you can get back into it voluntarily.
It's only a vessel if you're in it.
__________________
mister p is offline   Reply With Quote
Old 05 February 2012, 06:06   #34
Member
 
Country: UK - England
Town: Gloucestershire
Boat name: Osprey
Make: Osprey Vipermax
Length: 5m +
Engine: E-tec 300 G2
MMSI: TBC
Join Date: Dec 2006
Posts: 4,020
Just fit one of these to the transom...

__________________
---------------------------------------------------
Chris Stevens

Born fiddler
Chris is offline   Reply With Quote
Old 05 February 2012, 09:37   #35
Member
 
Nick Hearne's Avatar
 
Country: UK - England
Town: Bucks
Boat name: Blue & Ding Dong
Make: Ribeye,SR4 & Bombard
Length: 6m +
Engine: 115,50 & 15Hp Yams
Join Date: Feb 2004
Posts: 3,252
Quote:
Originally Posted by mister p View Post
Honestly chaps, if there's someone on board then hold the 'victim' under the armpits, get them to hold their breath, then it's "one" and dunk, "two" and dunk, and up onto the sponson on "three".
It's fun, it works and you don't need a ladder.
Get on with it.
It also helps with MOB when a ladder isn't always to hand.
Give it a go......it's good. Get's them involved.
Mine is not used for MOB but for the kids swimming off the boat the tend to jump off the bow swim round clime back on board!
If someone falls in then I would drag them back in my self, if it is me I can clime back in unaided!

The ladder I have is by Italian maker Trem if I remember rightly!
__________________
Member of the Ribeye supporters club!!!
Member of Bombard 380 Aerotec club
Member of SR4 club
Nick Hearne is offline   Reply With Quote
Old 05 February 2012, 09:50   #36
Member
 
actions's Avatar
 
Country: UK - England
Town: Herne Bay
Boat name: Red May
Make: Zodiac
Length: 4m +
Engine: 40hp Honda 4 Stroke
MMSI: Is quite long
Join Date: Jun 2010
Posts: 653
Send a message via Skype™ to actions
Quote:
Originally Posted by mister p
Honestly chaps, if there's someone on board then hold the 'victim' under the armpits, get them to hold their breath, then it's "one" and dunk, "two" and dunk, and up onto the sponson on "three".
It's fun, it works and you don't need a ladder.
Get on with it.
It also helps with MOB when a ladder isn't always to hand.
Give it a go......it's good. Get's them involved.
I need the ladder as although i can get in it will greatly assist my wife who has rheumatoid arthritis and can't put pressure on joints or lift herself. It also causes pain if someone pulls her out. Of course in an emergency its not an issue but for everyday general use. Swimming etc its no good. Hence the ladder thread.

Sent from my galaxy s2
__________________
actions is offline   Reply With Quote
Old 05 February 2012, 10:39   #37
Member
 
Country: UK - England
Town: Hazlemere
Boat name: FEEFO
Make: Bombard Aerotec 380
Length: 3m +
Engine: Outboard Mariner 25
Join Date: Aug 2010
Posts: 68
Quote:
Originally Posted by Chris View Post
Just fit one of these to the transom...

where do you get them from Chris?
__________________
Member of Bombard 380 Aerotec club
Mariner 25hp
Bloody expensive wheels!
Bongy is offline   Reply With Quote
Old 05 February 2012, 18:49   #38
Member
 
Country: New Zealand
Town: Tauranga
Boat name: Extra Pleasure
Make: Atomix
Length: 5m +
Engine: Outboard 60HP 2Strke
Join Date: Aug 2009
Posts: 182
The second pic in the second thread... http://www.rib.net/forum/attachment....6&d=1328296246

I made one myself with a piece of rope, a few knots and a piece of wood with two holes drilled in.

I just wrap the rope up around the wood (step) and it's small enough to store anywhere. Only really need one (maybe) two steps.

Saves a few pennies
__________________
rjbathgate is offline   Reply With Quote
Old 05 February 2012, 19:36   #39
RIBnet admin team
 
Nos4r2's Avatar
 
Country: UK - England
Town: The wilds of Wiltshire
Boat name: Dominator
Make: SR5.4
Length: 7m +
Engine: Yam 85
MMSI: 235055163
Join Date: Jul 2005
Posts: 13,054
RIBase
Quote:
Originally Posted by Bongy View Post
where do you get them from Chris?
Force 4 sell them. I was thinking about one myself, but I'm not sure if it'd rip out the screws from the transom without being bolted all the way through?
__________________
Need spares,consoles,consumables,hire,training or even a new boat?

Please click HERE and HERE and support our Trade Members.

Join up as a Trade member or Supporter HERE
Nos4r2 is offline   Reply With Quote
Old 05 February 2012, 21:58   #40
Member
 
Nasher's Avatar
 
Country: Other
Town: Principalite d'Chaos
Boat name: The Nashers Revenge!
Make: Windsor Brothers
Length: 6m +
Engine: Optimax 225
MMSI: "Mmmmm SI" she said!
Join Date: Jan 2004
Posts: 4,828
My solution from a few years ago.

http://www.rib.net/forum/f8/transom-ladder-14932.html

Nasher.
__________________
Nasher is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off




All times are GMT. The time now is 03:14.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.