Reply
 
Thread Tools Search this Thread
 
Old 02 November 2003, 08:32   #21
Member
 
Country: UK - Wales
Town: Pwllheli-North Wales
Boat name: V-ONE
Make: Highfield
Length: 8m +
Engine: Honda 250hp
Join Date: Mar 2001
Posts: 2,367
cracked hull/transom

first complaint i have ever seen about a fault on avon hull however i could say the sam about Ring.

I'll see if i can dig out some pics, a ring's deck came apart from the hull on a hard boat earlier this summer in barmouth.
__________________
www.waterwise-marine.co.uk
Jono Garton is offline   Reply With Quote
Old 02 November 2003, 09:17   #22
Member
 
Country: UK - England
Town: Ongar, Essex
Make: Avon 620
Length: 6.2
Engine: mercury 135 Optimax
Join Date: Oct 2003
Posts: 235
Been to Bembridge on Friday to look at the Ring and Avon A620 Both seem to be great Ribs but I think the Avon has the edge as you can squeeze in the twin Jockeys so 2 more seats and seems like Ring are more in to racing boats than the Avon alrounder
But hope this is the right decision just need some help on the engine size Bembridge favour Mercury and say that a 90 f/s is plenty but not sure if I should go to the Mercury 115 f/s. They are building a 620 as a demo with a 90 on which will be reaady in a few week so will have to go back to try.
By the way Bembridge Outboards are a great dealer very helpull with lots of advise for such a novice.

Jahno You may be able to help here being that you do have an avon.
__________________
Steve Care is offline   Reply With Quote
Old 02 November 2003, 09:29   #23
Member
 
Country: UK - Wales
Town: Pwllheli-North Wales
Boat name: V-ONE
Make: Highfield
Length: 8m +
Engine: Honda 250hp
Join Date: Mar 2001
Posts: 2,367
.

Hi

90 is a big no no

we have a 90hp merc 4 stroke on a 560 - that is spot on.

You need at least a 130 hp for a family cruising fun boat.
GraemeCooper has a 130 hp honda on a 620 which is a nice cruising boat, i have a 150hp optimax on the 620 now which is as economical as the 90hp and produce plenty of power when you need it.

The 620 handles a lot better with the wheight at the back, but the 560 is better with the wheight up front.

The suzuki 140 would be my ideal choice for family cruising, or possibly the 135 optimax.

Please call if you want any further help, I am personally not a massive fan of bembridge - try some avon dealers for there advice on engines.
__________________
www.waterwise-marine.co.uk
Jono Garton is offline   Reply With Quote
Old 02 November 2003, 09:30   #24
Member
 
Country: UK - Wales
Town: Pwllheli-North Wales
Boat name: V-ONE
Make: Highfield
Length: 8m +
Engine: Honda 250hp
Join Date: Mar 2001
Posts: 2,367
Finway

think finway leisure is more your area (steve)
__________________
www.waterwise-marine.co.uk
Jono Garton is offline   Reply With Quote
Old 02 November 2003, 09:34   #25
Member
 
Country: UK - England
Town: Ongar, Essex
Make: Avon 620
Length: 6.2
Engine: mercury 135 Optimax
Join Date: Oct 2003
Posts: 235
Jono

Thanks will make some calls Monday and scout about

Was concerned about the 90

Steve
__________________
Steve Care is offline   Reply With Quote
Old 02 November 2003, 13:49   #26
Member
 
Country: UK
Join Date: Oct 2003
Posts: 27
Re: cracked hull/transom

Quote:
Originally posted by JAHNO


a ring's deck came apart from the hull on a hard boat earlier this summer in barmouth.
what's this got to do with ribs ?


jano did'nt you know bembridge are avon dealers.



just spotted you've got some avons for sale what a surprise
__________________
rockey is offline   Reply With Quote
Old 02 November 2003, 16:45   #27
Member
 
Country: UK - Wales
Town: Pwllheli-North Wales
Boat name: V-ONE
Make: Highfield
Length: 8m +
Engine: Honda 250hp
Join Date: Mar 2001
Posts: 2,367
.

Hi Rockey

1/ Bembridge are Avon Dealers i know, is just there are better avon dealers out there.
2/I may be wrong but i was under the impression that Ring hard boats and ring rib hulls are made in the same factory?
3/I am selling my 620 and if avon made a 9m boat i would buy one.

How many Avon 620's have you been in/owned? Whats your background/experience with ribs? My only experience with Rings is the one i have outlined.

I'm only saying the way i see it not that i'm correct or not. I'm am obviously byest because I like Avons.
__________________
www.waterwise-marine.co.uk
Jono Garton is offline   Reply With Quote
Old 02 November 2003, 17:13   #28
Member
 
Country: UK
Join Date: Oct 2003
Posts: 27
Re: .

Quote:
Originally posted by JAHNO
Hi Roc

I'm am obviously byest because I like Avons.

fair enough jahno like wise me to ring's


have alook at www.ringpowercraft.co.uk he bulids some interesting ribs one with 4 x 300 yanmars quite a hand full
i belive
__________________
rockey is offline   Reply With Quote
Old 02 November 2003, 21:31   #29
Member
 
Country: UK - England
Town: Ongar, Essex
Make: Avon 620
Length: 6.2
Engine: mercury 135 Optimax
Join Date: Oct 2003
Posts: 235
Do all the rib manufacturers use their own jockey seats and consoles or are there a couple of major seat makers
Or does it not matter to much as long as you get the layout you want
__________________
Steve Care is offline   Reply With Quote
Old 02 November 2003, 21:37   #30
Member
 
Country: UK - Wales
Town: Pwllheli-North Wales
Boat name: V-ONE
Make: Highfield
Length: 8m +
Engine: Honda 250hp
Join Date: Mar 2001
Posts: 2,367
consoles etc

Avon use www.Outhill.com but jim @ bembridge makes has is own, ed @ olmec makes some nice consoles and seats- www.olmectubing.co.uk, i am not a big humber fan, but they make a fabtastic jockey seat.

butt genrally doesn't matter as long as you get the seat and console you like.
__________________
www.waterwise-marine.co.uk
Jono Garton is offline   Reply With Quote
Old 02 November 2003, 22:10   #31
Member
 
Country: UK - England
Town: Ongar, Essex
Make: Avon 620
Length: 6.2
Engine: mercury 135 Optimax
Join Date: Oct 2003
Posts: 235
Avon use www.Outhill.com but jim @ bembridge makes has is own, ed @ olmec makes some nice consoles and seats- www.olmectubing.co.uk, i am not a big humber fan, but they make a fabtastic jockey seat.



I've seen outhill and bembridge just tried olmectubing but they only have tubes on their site the bembridge seats and consoles looked good though.
Do most seats fix down with just velcro or with a clip of some type
__________________
Steve Care is offline   Reply With Quote
Old 02 November 2003, 22:21   #32
Member
 
Country: UK - England
Town: Margate / Ramsgate
Boat name: Bumbl
Make: Scorpion
Length: 8m +
Engine: Yanmar diesel
Join Date: Feb 2002
Posts: 2,837
I've just been down this route of jockey seats. I approached all the RIB manufacturers at the boat show and most were happy to sell me the seats (at a price though). From memory i can positivaly say the following people will sell them to you:

Tornado (glass'ed to deck, did say might be able to make a flange though) about £440
Ribcraft
Ribeye single = £500, twin = £585
Ribtec (which i bought, very nice seats) a bit more expensive than Ribeye seats but nicer.

Outhill, IMHO are overpriced poor quality products
__________________
Daniel is offline   Reply With Quote
Old 02 November 2003, 22:43   #33
Member
 
Country: UK - England
Town: SOUTHAMPTON
Boat name: Won't get Fooled Again
Make: Ribtec
Length: 6.5
Engine: Honda 130
Join Date: Mar 2002
Posts: 888
http://www.k4plus.com/

this is a great site and they do be selling seats
__________________
I need a little bit of Rhythym and a little bit of Blues
thewavehumper is offline   Reply With Quote
Old 02 November 2003, 22:44   #34
Member
 
Country: UK - England
Town: Margate / Ramsgate
Boat name: Bumbl
Make: Scorpion
Length: 8m +
Engine: Yanmar diesel
Join Date: Feb 2002
Posts: 2,837
Spotted that yesterday i think Stu, very nice looking console that be.
__________________
Daniel is offline   Reply With Quote
Old 03 November 2003, 20:32   #35
Member
 
Country: UK - England
Town: Ongar, Essex
Make: Avon 620
Length: 6.2
Engine: mercury 135 Optimax
Join Date: Oct 2003
Posts: 235
Well hopefully I will be making the right decision and joining the ribsters by ordering a new avon 620 with a Mercury F115.
As it seems you all meet up and such fun I can't wait to join in.

Do many of you launch from Essex very often or do I have to wait till I'm in the Isle of Wight for the summer.
__________________
Steve Care is offline   Reply With Quote
Old 03 November 2003, 21:00   #36
Member
 
Richard B's Avatar
 
Country: UK - England
Town: Devon
Boat name: White Ice
Make: Ranieri
Length: 5m +
Engine: Suzuki 115hp
Join Date: Jul 2002
Posts: 5,015
Quote:
Originally posted by stevecare
Do many of you launch from Essex very often...
Have a look here, this chap is in the Ongar area... http://www.ongar.org/dingy/index.html
__________________
Richard B is offline   Reply With Quote
Old 03 November 2003, 21:05   #37
Member
 
Country: UK - England
Town: Brittany/Portsmouth
Boat name: Merlin
Make: Solent 6.5
Length: 6m +
Engine: 200
MMSI: soon !
Join Date: Jul 2003
Posts: 5,451
Where the hell did you get that site from

It's not yours is it If it is the world makes sense now
__________________
Happy New Resolutions!!! : RIBbing for the craic!!!
The Jackeens is offline   Reply With Quote
Old 03 November 2003, 21:14   #38
JCW
Member
 
Country: UK - England
Town: Essex
Boat name: Inflatable
Make: Zodiac
Length: under 3m
Engine: Yamaha F6
Join Date: Aug 2001
Posts: 249
Send a message via AIM to JCW
Stevecare,
Bern Hanreck and I are both Essex Boys. We are 12 months of the year ribsters. We sometimes launch from Burnham Yacht Harbour, a very good place for starting out. I also launch my Inflatable from two tree Island near Southend.

There is also the BIBOA East Coast Rivers Cruise, normally held in April, which is always great fun

Best of luck with the new Rib.
__________________
Regards

JCW
JCW is offline   Reply With Quote
Old 03 November 2003, 21:23   #39
Member
 
Country: UK - England
Town: Chelmsford/Anglesey
Make: Avon SR/RibLite 3.1m
Length: 4m +
Engine: Honda 30hp/Yam 8hp
Join Date: Jul 2003
Posts: 970
Essex Boys

Steve Care

Another Essex boy here,just down the road from you in fact! I also use my rib all year and you're welcome to join me whenever you wish. I usually launch at Bradwell on the Blackwater. Ring me on 07768 153 386 and we'll organise a blast.
__________________
Phil Davies is offline   Reply With Quote
Old 03 November 2003, 21:41   #40
Member
 
Country: UK - England
Town: Chelmsford/Anglesey
Make: Avon SR/RibLite 3.1m
Length: 4m +
Engine: Honda 30hp/Yam 8hp
Join Date: Jul 2003
Posts: 970
Re: ?

[QUOTE]Originally posted by MeMe
Ring - a little like owning a TVR, not many dealers and hence trouble securing the latter.

A good analogy, Graeme. As an owner of an Avon and a TVR I concur fully with your comments. Steve, if you go for the Ring, I hope for your sake it's more watertight than a TVR!
__________________
Phil Davies is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off




All times are GMT. The time now is 22:54.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.