Reply
 
Thread Tools Search this Thread
 
Old 10 July 2011, 10:05   #1
Member
 
Country: UK - England
Town: Sandhurst
Boat name: none
Make: XM
Length: under 3m
Engine: none
Join Date: Jul 2011
Posts: 1
Xm 235 rib

Hi, I hope I'm in the right place.

I have an old XM 235 inflatable bought in the mid 90's. Problem is I have lost the valves so I can't inflate it. The valves would need to be fairly shallow and screw in. I can't find a suitable replacement and have spoken to XM in the UK who say that this model has been discontinued for sometime and they can't help (they don't know what the valves were! Mind you the company has been bought out since).

Has anyone got a similar model who could help? The boat can take a 4hp motor and has a slatted floor. I would need 3 valves - 1 on each inner side of the boat towards the rear and 1 for the cushion/seat that wedges in.

Any help at all would be greatly appeciated and apologies if this is not the right place to ask this.

Thanks,
Mike
__________________

__________________
miken is offline   Reply With Quote
Old 10 July 2011, 12:25   #2
Member
 
Country: USA
Town: Oakland CA
Length: 3m +
Join Date: Feb 2005
Posts: 6,653
Why do the valves need to be shallow? And are you talking about internal to the tubes, or a low profile exterior?

jky
__________________
jyasaki is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off





Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -5. The time now is 13:24.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.