sticking up my avon !!

[tim2658]

hi i need to restick a piece of rubber at the rear of my port tube,i i did stick this a few weeks back but after a good bit of hammering yesterday in good size swell its come unstuck, i used polymarine 2 part glue is there a better one and does anyone have any secrects on the best way to stick her cheers tim

[Downhilldai]

Did you prep the hypalon before applying the adhesive?
It needs a good wipe down with solvent to remove any oils, grease, etc, then abraded with sandpaper to give a key for the adhesive (2 coats).

[ollyit]

is an area with the hypalon paint on?

[tim2658]

no i did stick it up before i used the paint i cant of cleaned it enough then was that yours down the eca yesterday ollyit !

[ollyit]

yeah the project one is down there at the moment

[Rogue Wave]

bostic 2402 is the best or Alpha glue. I think paul tilley (TIDEL) sells this mail order alo ribshop sells stuff too. pretty good application instructions on the ribshop website also.

you have to do the prep properly

this link might help

http://rib.net/forum/showthread.php?...highlight=avon

[Limey Linda]

Can anyone translate the previous 4 posts into English please.