Redbay dimensions

[C2 RIBS]

A bit late in the day for the office, but does anyone know the beam on a Redbay 850 stormforce and its weights?

Thank you

[willk]

IIRC, the beam is around 3.1m

I'm not sure about the weight, heavy I guess...

It is the 850, not the 8.4m you're checking? That makes it interesting, 'cos there's only a three of them about, so it must be NEW!

[Mollers]

5'7", 42-48-36.

[C2 RIBS]

Originally Posted by willk

IIRC, the beam is around 3.1m

I'm not sure about the weight, heavy I guess...

It is the 850, not the 8.4m you're checking? That makes it interesting, 'cos there's only a three of them about, so it must be NEW!

Yep 850 is a better set up than 8.4, sits higher with tubes clearer than 8.4 that sits low and makes 850 a better set up IMHO. I was checking website and no figures, I have the drawings etc but no facts. I need to get correct beam, not sure it is as wide as 3.1

[Ribochet]

3.1m would not be a kick in the 4ss off it - I know my 7.4m is very close to that.

If you pm steve.redbay - he is their Naval Architect or if you want to wait I will get the details for you when I am up on Saturday for their open weekend - let me know

[C2 RIBS]

Originally Posted by Ribochet

3.1m would not be a kick in the 4ss off it - I know my 7.4m is very close to that.

If you pm steve.redbay - he is their Naval Architect or if you want to wait I will get the details for you when I am up on Saturday for their open weekend - let me know

That would be great beam
And weights if poss pls, busy fri and sat so cant chase info myself

[willk]

Internal beam is 1856mm.

[Ribochet]

Originally Posted by C2 RIBS

That would be great beam
And weights if poss pls, busy fri and sat so cant chase info myself

Ok Dokey

[Ribochet]

Originally Posted by willk

Internal beam is 1856mm.

Plus 2 x 560mm tubes = 1120mm + 2x D armour 50mm

Total 3.026m

[Callum Stewart]

Charles of Redbay Power Boats that runs the RB 850 with twin 150hp suzis says its just under 3.1mtrs

If you would like to know any more information from the horses mouth give him a call on 07813680485

[tonymac]

Originally Posted by Callum Stewart

Charles of Redbay Power Boats that runs the RB 850 with twin 150hp suzis says its just under 3.1mtrs

His is a really nice bit of kit. Silly man let Willk and I drive her for two days last year

Still makes me smile when I think of it!!

[Ribochet]

Originally Posted by c2 ribs

that would be great beam
and weights if poss pls, busy fri and sat so cant chase info myself

Spent the day out on the water playing in Rathlin sound with wind against tide therefore I did not get to talk to Steve about weight but I picked up this leaflet as the 850 is out of the same mould - hope this helps

[C2 RIBS]

Cheers for help everyone, we were out on the 950 last week and very impressive it was too