Reply
 
Thread Tools Search this Thread
 
Old 19 September 2006, 06:42   #11
RIBnet supporter
 
Jizm's Avatar
 
Country: UK - England
Town: Southampton
Boat name: Hissing Sid
Make: Ross Smith Cobra
Length: 6m +
Engine: 200HP Optimax
MMSI: 235038046
Join Date: Jun 2002
Posts: 3,803
cheers for the offer pete, just want to make sure I need them before I go drilling holes in my outboard!

Kitten, yes the boys are still around, Arf is working in Bristol at the mo and Smurf is over Fawley way with his new woman! Me and smurf went to the boatshow together just yesterday. Sprocket is up in London now and is the president of BALLS London.
__________________

Jizm is offline   Reply With Quote
Old 19 September 2006, 07:02   #12
Member
 
richardjawilson's Avatar
 
Country: UK - England
Town: London, boat Dartmouth
Boat name: Lark
Make: Capelli Cap 32 WA
Length: 10m +
Engine: Yamaha 250x2
MMSI: 235096621
Join Date: Feb 2006
Posts: 189
Hi there, are you over propped??? This could be causing the cavitation. I once had a 4.8 rib which had a prop with a very course pitch and I reduced it down by 1 size and it worked perfectly.

One word of warning, if you are marginal on spare rpm, this is not the right route to go down, otherwise you risk having a blowup!!

regards richard
__________________

__________________
richardjawilson is offline   Reply With Quote
Old 19 September 2006, 07:09   #13
RIBnet supporter
 
Jizm's Avatar
 
Country: UK - England
Town: Southampton
Boat name: Hissing Sid
Make: Ross Smith Cobra
Length: 6m +
Engine: 200HP Optimax
MMSI: 235038046
Join Date: Jun 2002
Posts: 3,803
I get 5200rpm on my my current prop (11-1/8" x 13"P), I am under the impression that this is ok due to the manufacturers rec WOT of 4500 to 5500rpm, I am going to try a different prop when it arrives to see what difference it makes.
Jizm is offline   Reply With Quote
Old 19 September 2006, 08:01   #14
RIBnet admin team
 
Nos4r2's Avatar
 
Country: UK - England
Town: The wilds of Wiltshire
Boat name: WhiteNoise/Dominator
Make: Ballistic 7.8/SR5.4
Length: 7m +
Engine: Opti 225/Yam 85
MMSI: 235090687/235055163
Join Date: Jul 2005
Posts: 12,645
RIBase
Call me paranoid but...

I'm not sold on sticking big things on a lower unit-whatever the manuf. say they are going to cause drag and increase fuel consumption at high RPM-it's like towing a paravane.
Basic physics says they can't do all they were claimed to do as well.
I had a set on a boat without PTT and it was all over the place with them on and trimmed out on the pin so be wary 1st time out with them.

Be aware that the lift/drag generated will change the stresses on your transom too.


Of course, you might love them!
__________________
Need spares,consoles,consumables,hire,training or even a new boat?

Please click HERE and HERE and support our Trade Members.

Join up as a Trade member or Supporter HERE
Nos4r2 is offline   Reply With Quote
Old 19 September 2006, 09:06   #15
Member
 
Country: UK - England
Town: I.O.W/Bristol
Boat name: HotShot
Make: shakey
Length: 5m +
Engine: 70hp Tohatsu
Join Date: Jul 2003
Posts: 1,543
there have been threads about them before and how they can make the boat turn violently when negotiating big waves or something. Worth looking into...
__________________
slimtim is offline   Reply With Quote
Old 20 September 2006, 03:58   #16
Jus
Member
 
Country: UK - England
Town: Wiltshire
Boat name: At Lantic
Make: Ribcraft
Length: 4m +
Engine: Evinrude Etec 75
Join Date: Aug 2006
Posts: 70
I used these on a hard boat and found that they made it handle interestingly to say the least.

Running with following waves in particular the boat would carve off unpredictably to one side when going down the wave. This would be so severe sometimes that it would cause the boat to pitch right up on one side. Without the assistance of tubes to stabilise things this effect could be fairly dramatic and eventually I took them off.
__________________
Jus is offline   Reply With Quote
Old 20 September 2006, 04:51   #17
RIBnet admin team
 
Nos4r2's Avatar
 
Country: UK - England
Town: The wilds of Wiltshire
Boat name: WhiteNoise/Dominator
Make: Ballistic 7.8/SR5.4
Length: 7m +
Engine: Opti 225/Yam 85
MMSI: 235090687/235055163
Join Date: Jul 2005
Posts: 12,645
RIBase
Quote:
Originally Posted by Jus
I used these on a hard boat and found that they made it handle interestingly to say the least.

Running with following waves in particular the boat would carve off unpredictably to one side when going down the wave. This would be so severe sometimes that it would cause the boat to pitch right up on one side. Without the assistance of tubes to stabilise things this effect could be fairly dramatic and eventually I took them off.

Yep, that's exactly what mine did. Very scary.
__________________
Need spares,consoles,consumables,hire,training or even a new boat?

Please click HERE and HERE and support our Trade Members.

Join up as a Trade member or Supporter HERE
Nos4r2 is offline   Reply With Quote
Old 20 September 2006, 05:00   #18
RIBnet supporter
 
bedajim's Avatar
 
Country: UK - England
Town: Cambs/Northants
Length: no boat
Join Date: May 2006
Posts: 2,499
I binned a set after reading the posts last time it came up


James
__________________
bedajim is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off





Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -5. The time now is 21:43.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.