Thread Tools Search this Thread
Old 18 September 2016, 11:35   #11
spartacus's Avatar
Country: UK - Scotland
Town: Aberdeenshire
Boat name: Sula
Make: Ribcraft 4.8m
Length: 4m +
Engine: Tohatsu 60hp + aux
MMSI: 235087213
Join Date: Jun 2007
Posts: 3,055
Question - there's a good chance the glue will bloom given the relatively high humidity. Temperature ideally between 18-25 degrees, and humidity less than 60%, shaded and well ventilated. MEK and glue are both highly flammable, so don't work near naked flames. The glue smell is strong, so if area can be closed off after gluing then go for it. The roller looks good but I doubt you'll get it in the tube with the valve out. Again, it's just to be able to press against to ensure you get a good bond. A rounded pole or broom handle will do the trick.

Is that with or without VAT?
spartacus is offline   Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

» Member's RIBs




Add your RIB

Our Communities

Our communities encompass many different hobbies and interests, but each one is built on friendly, intelligent membership.

» More about our Communities

Automotive Communities

Our Automotive communities encompass many different makes and models. From U.S. domestics to European Saloons.

» More about our Automotive Communities

Marine Communities

Our Marine websites focus on Cruising and Sailing Vessels, including forums and the largest cruising Wiki project on the web today.

» More about our Marine Communities

Copyright 2002-2015 Social Knowledge, LLC All Rights Reserved.

All times are GMT -5. The time now is 01:18.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2016, vBulletin Solutions, Inc.