honwave drain plug assembly

[Elcaro]

HI there I found my honwave wasn't draining of rainwater cos of leaves bunging up the drain hole so I took the drain plug assembly out. One of the seals is a bit iffy so I thought I'd get a replacement drain plug assembly e.g. from Trident Marine. Then I saw in am old thread including a comment from jeffstevens : "... if you swap out the whole thing it means breaking the seal through the transom." Does that mean I've messed something up?I was thinking of sticking some sealant (what sort?) around the inner circumference of the hole b4 I fit the replacement? Any advice pls? E.g from jeff? TIA, Terry.

[jeffstevens763@g]

Originally Posted by Elcaro

HI there I found my honwave wasn't draining of rainwater cos of leaves bunging up the drain hole so I took the drain plug assembly out. One of the seals is a bit iffy so I thought I'd get a replacement drain plug assembly e.g. from Trident Marine. Then I saw in am old thread including a comment from jeffstevens : "... if you swap out the whole thing it means breaking the seal through the transom." Does that mean I've messed something up?I was thinking of sticking some sealant (what sort?) around the inner circumference of the hole b4 I fit the replacement? Any advice pls? E.g from jeff? TIA, Terry.

Just seal it again Terry with sikaflex trident will sell it get a small tube no good wasting it buying a big one just make sure it's clean of the old stuff and inside the transom fit it and clean off just the same as bath sealer to make a neat job

[Elcaro]

Ah thanks jeff, is this the sort of thing pls? Seems to be the only one on the site.



https://www.tridentuk.com/gb/paints-.../sikaflex.html


(don't know how to post it as a link :-( )


- Terry.

[jeffstevens763@g]

That will do mate

[Elcaro]

Thanks jeff