Reply
 
Thread Tools Search this Thread
 
Old 06 October 2013, 06:00   #1
Member
 
kubcat's Avatar
 
Country: Australia
Town: Sydney
Boat name: Lunasea
Make: Ribtec 890SX
Length: 8m +
Engine: Yamaha ME 421STI x 2
Join Date: Aug 2009
Posts: 470
Yamaha stern drive trim pump

My port Yamaha diesel sterndrive trim pump is running intermittently. The starboard pump did this a little while ago and when we pulled it apart it was not repairable, luckily I had a spare.

Fearing the worst I am looking for a replacement.

Anyone that has one they don't need anymore or knows where I can find one?
__________________

__________________
kubcat is offline   Reply With Quote
Old 06 October 2013, 07:27   #2
Member
 
Country: UK - Scotland
Town: north ayrshire
Boat name: charlie girl
Make: reiver 3.8/regal3760
Length: 10m +
Engine: 40hp 2st 2x6lp 315
Join Date: Jul 2009
Posts: 1,498
If you cant find a Yamaha one I'm fairly sure you could adapt a Volvo or mercruiser trim pump to fit the Yamaha hoses

they all do a similar job & Volvo & merc stuff is usually easier to find wireing is fairly simple the pump turns one direction for up & the opposite for down

hope you get sorted
__________________

__________________
beamishken is offline   Reply With Quote
Old 06 October 2013, 13:07   #3
Member
 
Country: UK - England
Town: southampton
Boat name: hydradrive
Make: yamaha
Length: no boat
Engine: sterndrives
Join Date: Sep 2012
Posts: 289
I may have 1 in my stash of hydradrive bits
__________________
yam man is offline   Reply With Quote
Old 06 October 2013, 17:35   #4
Member
 
kubcat's Avatar
 
Country: Australia
Town: Sydney
Boat name: Lunasea
Make: Ribtec 890SX
Length: 8m +
Engine: Yamaha ME 421STI x 2
Join Date: Aug 2009
Posts: 470
Quote:
Originally Posted by beamishken View Post
If you cant find a Yamaha one I'm fairly sure you could adapt a Volvo or mercruiser trim pump to fit the Yamaha hoses they all do a similar job & Volvo & merc stuff is usually easier to find wireing is fairly simple the pump turns one direction for up & the opposite for down hope you get sorted
I have a spare brand new Mercruiser pump and if it gets too hard, may do exactly that. Will probably need to change out the starboard motor as well so they trim at the same speed.
__________________
kubcat is offline   Reply With Quote
Old 06 October 2013, 17:36   #5
Member
 
kubcat's Avatar
 
Country: Australia
Town: Sydney
Boat name: Lunasea
Make: Ribtec 890SX
Length: 8m +
Engine: Yamaha ME 421STI x 2
Join Date: Aug 2009
Posts: 470
Quote:
Originally Posted by yam man View Post
I may have 1 in my stash of hydradrive bits
Yam man, if you don't mind have a look to see if you have a good one.....and then we need to ship it to Australia.
__________________
kubcat is offline   Reply With Quote
Old 07 October 2013, 02:57   #6
Member
 
Country: UK - England
Town: Portsmouth
Boat name: Not sure
Make: ABC/Priddy
Length: 10m +
Engine: 2 x 500 FPT
Join Date: Jul 2001
Posts: 926
I have some if Yam man cannot help Alan P
__________________
Alan Priddy is offline   Reply With Quote
Old 09 October 2013, 22:57   #7
Member
 
kubcat's Avatar
 
Country: Australia
Town: Sydney
Boat name: Lunasea
Make: Ribtec 890SX
Length: 8m +
Engine: Yamaha ME 421STI x 2
Join Date: Aug 2009
Posts: 470
Got one from the US but would like another as a spare.

If anyone finds a decent one in the pile of bits that they would like to pack and send to Sydney Australia, it would be most appreciated.
__________________

__________________
kubcat is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off





Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -5. The time now is 12:36.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.