Showing results 1 to 25 of 36
Search took 0.00 seconds.
Search: Posts Made By: Crapgame
Forum: Bits and pieces 20 April 2023, 22:12
Replies: 3
Views: 503
Posted By Crapgame
HI Skip, I assume your set includes the marine...

HI Skip, I assume your set includes the marine plywood bow board?
Forum: Bits and pieces 20 April 2023, 22:09
Replies: 4
Views: 737
Posted By Crapgame
I have a massive Wing 17 gallon bow soft tank...

I have a massive Wing 17 gallon bow soft tank that is just too frickin' big for short bay insursions here. I'm interested in your Avon 5 gallon 20litre type if still have.
Forum: Inflatable boats - SIBs and folding RIBs 26 August 2021, 23:58
Replies: 4
Views: 624
Posted By Crapgame
Ragnar, how thick is the bow plywood supposed to...

Ragnar, how thick is the bow plywood supposed to be? I've got a marine supply around the corner with bits for docks, bulkheads, lifts and marine plywood. I figure the complete kit would be easier...
Forum: Inflatable boats - SIBs and folding RIBs 22 August 2021, 01:55
Replies: 1
Views: 497
Posted By Crapgame
New to Me Achilles SB140 14ft SIB

After having 2 half boats that don't equal a whole, I'm finally the owner of a complete Achilles SB140 14ft rubber duck. Found it locally on the fascistbook, complete with aluminum hard deck,...
Forum: Inflatable boats - SIBs and folding RIBs 20 August 2021, 22:35
Replies: 4
Views: 624
Posted By Crapgame
Thank you, Ragnar. I've been on a rollercoaster...

Thank you, Ragnar. I've been on a rollercoaster with this particular boat. Sold to me as an FC-530, but 3 of the 4 hard decks are actually for an FC-470. I scored the 4th panel from N2Gypsy,...
Forum: Inflatable boats - SIBs and folding RIBs 20 July 2021, 22:30
Replies: 4
Views: 624
Posted By Crapgame
FC470 Plywood Bow Board for Aluminium Hard Deck

I now have the 4 piece hard deck (last piece thanks to N2Gypsy), but not the marine plywood bow board. Did anybody ever sketch one up?

A few people over the years have asked but I haven't seen...
Forum: Inflatable boats - SIBs and folding RIBs 02 January 2021, 16:37
Replies: 1
Views: 677
Posted By Crapgame
Bump for 2021! I think it might be more...

Bump for 2021!

I think it might be more practical to buy a rubber duck for the FC470 alu hard deck I do have.
Forum: Bits and pieces 02 July 2020, 22:56
Replies: 1
Views: 604
Posted By Crapgame
$1200 plus shipping or pick up locally FL...

$1200 plus shipping or pick up locally FL Panhandle
Forum: Bits and pieces 06 May 2020, 01:28
Replies: 1
Views: 604
Posted By Crapgame
SEAL/USMC Recon Durajet 25-45HP 20" Shaft Low LNIB $1500+

One black Durajet lower end assembly, tapered venture style for 25-45HP 20" shaft outboard engines, part of the Improved Marine Amphibious Reconnaissance System (IMARS) used on Johnson Enforcer 35HP...
Forum: Trailers & towing 02 May 2020, 05:21
Replies: 1
Views: 549
Posted By Crapgame
Trailer 4 FC530: Where 2 Position Bunks?

Hello, altering a 22ft boat trailer for hauling Zodiac FC-530. I'm installing two carpet covered 2x6 pressure treated or the recycled polymer decking, to 2" angle iron welded to the trailer cross...
Forum: Inflatable boats - SIBs and folding RIBs 05 March 2020, 06:22
Replies: 1
Views: 677
Posted By Crapgame
FC530 Floorboards Leads or Dimensions

I still haven't had any luck finding aluminum hard floorboards for Zodiac FC530. I have some ideas for a safe, interim replacement but need dimensions for the issue boards.

And I'm going to build...
Forum: Trailers & towing 29 October 2018, 19:30
Replies: 1
Views: 973
Posted By Crapgame
Instead of raising the bunks, can I just weld 2"...

Instead of raising the bunks, can I just weld 2" angle iron to the trailer frame to bolt the bunks flat along the top of the trailer cross ribs?

Then have a 3 leg bracket with a welded on U, two...
Forum: Inflatable boats - SIBs and folding RIBs 18 October 2018, 02:19
Replies: 2
Views: 897
Posted By Crapgame
FC530 Abrasion Holes Near D Ring Triangles

I found some holes in my FC530, two separate abrasion holes near the D Ring triangles; one group of 3 holes inboard, and the portside speed tube valve needs to be rebuilt due to leak.

I assume...
Forum: Trailers & towing 14 October 2018, 00:45
Replies: 1
Views: 973
Posted By Crapgame
Trailer for FC530 Project

Hello, I bought this used boat trailer to modify for my FC-530. My intent is to weld 1/4" x 4" wide flat bar to the crossmembers almost vertically, then use 2"x2"x4" angle iron welded to the flat...
Forum: RIBs & ribbing 21 July 2018, 18:59
Replies: 10
Views: 2,146
Posted By Crapgame
A Local Avon SR6 RIB

Semi-local Avon SR6 Searider RIB, no engine, incomplete controls, asking $2500 :eek: Might offer $500 to help him get rid of it.

This I'm falling in love with, 28ft Gemini RIB, plenty of room...
Forum: RIBs & ribbing 19 July 2018, 22:53
Replies: 7
Views: 994
Posted By Crapgame
I see now, Zodiac F530 is 10" wider insider, big...

I see now, Zodiac F530 is 10" wider insider, big difference in fit, one wave and the floor folds the pops out vertically.
Forum: RIBs & ribbing 18 July 2018, 02:27
Replies: 7
Views: 994
Posted By Crapgame
I got a quote of $1200 from Inmar Marine for one...

I got a quote of $1200 from Inmar Marine for one of their 530 Aluminum Hard Floor Kits.
Forum: Inflatable boats - SIBs and folding RIBs 16 July 2018, 17:17
Replies: 19
Views: 3,237
Posted By Crapgame
Thanks for posting this. Got a hundred items on...

Thanks for posting this. Got a hundred items on the kit list from fish hooks to GPS to blipper, but didn't think about a ladder to get back in after snorkeling, when gravity comes back into the...
Forum: Inflatable boats - SIBs and folding RIBs 16 July 2018, 02:02
Replies: 0
Views: 697
Posted By Crapgame
Zodiac 6 & 18 gal Fuel Bladders: Which Most Practical?

Regarding the Zodiac 6 and 18 gallon fuel bladders, which is more practical?

What's the height and width of each?

How far or how many hours can I expect to get out of the 6 gal? I'm asking...
Forum: Inflatable boats - SIBs and folding RIBs 16 July 2018, 01:19
Replies: 17
Views: 2,107
Posted By Crapgame
I've got a USN Mk31 Pen Flare Kit that is going...

I've got a USN Mk31 Pen Flare Kit that is going into a vertical pouch along with a Mk13 Day/Night Flare and 3x5 signal mirror. I need to look into a color GPS with chart capability and handheld...
Forum: RIBs & ribbing 10 July 2018, 23:18
Replies: 7
Views: 994
Posted By Crapgame
SoCalHurricane, email sent Re the 530 deck plates...

SoCalHurricane, email sent Re the 530 deck plates and 55hp engine.
Brave Eagle, I just got 6each NOS Zodiac Z-2108 Stainless Valve Caps. I need to get back with Bullfrog about rebuild kits for the...
Forum: Bits and pieces 09 July 2018, 19:19
Replies: 4
Views: 755
Posted By Crapgame
US Buyer FC530 Aluminium Hard Deck

US Buyer, looking for FC530 Aluminium Hard Deck with stringers, or at least 3 FC530 floor plates to replace the FC470 decks that came with my rubber duck.

Also, "need" an 18l fuel bladder.
Forum: RIBs & ribbing 03 July 2018, 06:54
Replies: 2
Views: 575
Posted By Crapgame
New Home, New to Me FC530 Project: Powering & Air Valve Repl?

OK, been at my new place in FL since March. I've got an FC530 Project on the way to me. Right off the bat, I know it needs valve covers and an engine. The Inflatable keel has come loose from...
Forum: RIBs & ribbing 03 July 2018, 06:46
Replies: 7
Views: 994
Posted By Crapgame
New Home, New to Me FC530 Project: Powering & Air Valve Repl?

OK, been at my new place in FL since March. I've got an FC530 Project on the way to me. Right off the bat, I know it needs valve covers and an engine. The Inflatable keel has come loose from...
Forum: Upcoming RIB cruises 10 March 2018, 23:54
Replies: 2
Views: 909
Posted By Crapgame
Trying to wind you up? No sir. Just when I...

Trying to wind you up? No sir.

Just when I asked before I was told the crossing was possible, when done safely during certain times of the seasons. Its not a trip I'd attempt to do alone...
Showing results 1 to 25 of 36

 


All times are GMT. The time now is 18:57.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.