RIBnet Forums

RIBnet Forums (https://www.rib.net/forum/)
-   Engines & props (https://www.rib.net/forum/f36/)
-   -   List Your Spare Props Here (https://www.rib.net/forum/f36/list-your-spare-props-here-22455.html)

Chris 07 December 2007 15:34

List Your Spare Props Here
 
Do you have spare props that you are happy to lend someone so they can test or with a view to possibly selling, then list them here!

The idea is No Prices as the purpose of this thread is just to share information on what props everyone has knocking about. People can then contact you directly and you can agree between you how you want to proceed. You may be happy to lend the prop for a test or, if its a newcomer to the forum you may insist on a purchase or deposit before you send the prop.

Chris

Chris 07 December 2007 15:38

Props Available
 
2 x New and boxed BRP Evinrude / Johnson 19" Aluminium Props suitable for Etec 90 / 115 and the older V4 engines

1 x Used 17" Johnson Prop (OMC) one minor ding but no major damage

1 x Quicksilver Silverado 18" Stainless Steel Prop with Flo Torque Hub for Johnson / Evinrude engines can be fitted with other hub kits for different engines.

All Props are standard rotation.

PeterR 07 December 2007 17:42

I have one brand new 17 inch evinrude for 90-115 its the standard fit ali one

ian parkes 07 December 2007 22:21

I also have a 13 1/4 x 17 standard alloy prop from etec90 as new would swap it for a 15" pitch or sell .

Nos4r2 08 December 2007 00:25

I have (all fit Yamaha K series 75-90hp 15 spline 4" gearcase)

13.25x15" genuine Yamaha aluminium(badly damaged blade-needs to go to a prop shop. Free to whoever wants it)
13.25x17" genuine Yamaha aluminium
13.25x19" Propulse plastic jobby-haven't tried it out.

Might have a Michigan Wheel Rapture 13.25x17" stainless too-not sure if I like it yet.

toby4594 12 December 2007 20:55

12.5"x19"x4 Blade Ali Prop
Suzuki 15 Spline
4 1/4" Gearcase

Nos4r2 13 December 2007 02:11

Found a damaged 10 3/8x14" Merc/Mariner prop from my SR4/mariner 50 in the garage earlier. Free to anyone who wants to have it fixed as it'll be cheaper than buying a new one.

roofer 13 December 2007 18:07

29 hydromotive quad iv 4 blade
26 trophy 4 blade
25 renegade 4 blade fits omc and merc
pair of 23 mirage plus with flo torque hubs
24 chopper lh

All merc fitment.

9D280 17 December 2007 09:15

Quote:

Originally Posted by Nos4r2 (Post 230627)
Found a damaged 10 3/8x14" Merc/Mariner prop from my SR4/mariner 50 in the garage earlier. Free to anyone who wants to have it fixed as it'll be cheaper than buying a new one.

Nos,

How many splines / shaft dia etc? Also just how bent is it?

Brian 09 January 2008 16:00

Bravo 1
 
I have a Bravo 1 prop.
It is Left-hand, Stainless Steel, 4-Blade, 24 pitch uprated by Steel Developments to 24.75.
Mercury Part no. 48-831911A55

Anybody interested?

matt h 09 January 2008 18:30

Quote:

13.25x17" genuine Yamaha aluminium

Nos, need to try that prop, what do you you think about it on mine,:)

Nos4r2 09 January 2008 19:49

Quote:

Originally Posted by 9D280 (Post 231037)
Nos,

How many splines / shaft dia etc? Also just how bent is it?

Sorry, missed this! 15 spline. Don't know shaft diameter-it's too greasy in there to get a tape measure in. It needs a big chunk of a blade replacing.

Nos4r2 09 January 2008 19:53

Quote:

Originally Posted by matt h (Post 233478)
Nos, need to try that prop, what do you you think about it on mine,:)

You'r welcome to try it mate. Want me to drop it in next time I'm passing your parents?

matt h 09 January 2008 23:27

cheers, that will be superb, would be great to give it a go:thumbs:

Lostboy 10 January 2008 14:03

Evinrude standard-fit aluminium 15 pitch for 90-115hp.

ian parkes 17 January 2008 00:09

Quote:

Originally Posted by Lostboy (Post 233591)
Evinrude standard-fit aluminium 15 pitch for 90-115hp.


Thats what I need

Do you want to sell it or swap for a 17 pitch original as new

JABS 25 March 2008 22:23

Evinrude 19 pitch to try, please?
 
I have a Mercury 14 dia 18 pitch stainless prop which I don't need..
Evinrude 14 dia x 23 pitch sainless prop which is way to coarse

Would like to try an Evinrude 14 1/2 dia by 19 or 18 pitch prop please.

Can collect/deliver/ A3 corridor.

Tony.

matt h 14 April 2008 16:25

Quicksilver 13 x 19 Stainless steel, lovely condition, for Yamaha K series spline,

rib-x450 14 April 2008 20:00

Wqanted 10 x 19 pitch prop or 10 x 18 prop for Mercury 60hp
 
I am after a few props to try if anyone has on to lend or sell...........

WANTED WANTED WANTED.............

Part number required I think are:

48-73146A40 10 inch dia 19 pitch


48-73144A40 10 inch dia 17 pitch


Many thanks


Chris

Daveboy 71 14 April 2008 20:49

1 x Used (1 yr old; good condition) BRP Evinrude 21" Viper SS Prop suitable for Etec 115 and above engines.


All times are GMT. The time now is 22:49.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2022, vBulletin Solutions, Inc.