Wanted 7m-8.5m Project Performance RIB Hull

JMB Marine · 02 September 2011, 10:25

I am looking for a RIB with performance pedigree for a customer (wants it to run above 60mph), it needs to be between 7-8.5m doesnt matter the state he wants a winter project would look at hulls with or without engines.

sailmail · 02 September 2011, 15:25

i have a 2004 us navy willard sea force, 7 meter, yanmar 440 turbo, hamjet 292. needs only minor repair. less than 100 hours. located boston usa area.

JMB Marine · 02 September 2011, 20:20

Thanks though looking for one in UK or Ireland

benc · 02 September 2011, 23:40

What sort of budget?

JMB Marine · 03 September 2011, 14:08

The customer is open to ideas and no budget is set but obviously doesnt want to be paying over the odds for a wreck of a boat.

arnie · 23 September 2011, 14:22

Quote:

Originally Posted by JMB Marine

The customer is open to ideas and no budget is set but obviously doesnt want to be paying over the odds for a wreck of a boat.

my chasecraft on here will do 50mph re proped i recon could see 60mph

PeterBC · 12 October 2011, 18:45

I have an SR9 with 2x250 Mercury Opti's I am considering moving on. Happily sit at 70+mph.

Has 4 suspension seats but could do with some work adding an aft bench seat and some "finishing" to make it perfect.

starnetman2001 · 30 October 2011, 11:19

Hello,

I have a 7.8 meter Ribquest Hull. It is a bare hull, never been in the water and unused from new.

David