yamaha 75 hp and Command Link digital gauges

[zubol]

Could anyone please help me with the connection of my yamaha 2 stroke 75 hp from 2011 to Command Link tacho (Part no: 6Y8-8350T-0) and fuel manager (Part no: 6Y8-8350F-01)?
I have 1 bus bar and I do not know how to connect all each other
It should be connected somewhere to the engine or all cables are in control (703)?

[phantom 19]

It won't work with your 75hp.

The 6y8 system requires a modern four stroke fuel injected outboard with a 6y8 data port which provides all the information the dials require down a dedicated loom and the bus bar. The fuel management system too is unlike the old system, it too gets all its information about fuel consumption directly from the fuelling section of the ECU.

[zubol]

Originally Posted by phantom 19

It won't work with your 75hp.

The 6y8 system requires a modern four stroke fuel injected outboard with a 6y8 data port which provides all the information the dials require down a dedicated loom and the bus bar. The fuel management system too is unlike the old system, it too gets all its information about fuel consumption directly from the fuelling section of the ECU.

In this case could you please let me know which gauges I can use? My engine is 75 CETO L

[Davie]

Part no 6YR-W0035-M6-00 £285 + VAT




£200 inc vat inc post within the uk

[zubol]

and what with 6Y5-835 ?
is it the same?

[Davie]

6y5-8350T-04-00 is the correct Tacho £244 + vat
6y5-83570-S6-00 is the correct speedo £372 + vat
You still need the cables on top of these prices.