Seat height

[Hightower]

Could some nice soul please take a tape to their seat cushion please? I'm trying to find out how high one sits above the jockey seat so that I can calculate the height on the seat back rest.

Thanks awfully!

[Jizm]

Mine are approx 650mm from the floor to the top of the pad.

[Nasher]

Andy

I still have the measurements of the foam from inside my jockeys from when I re-upholstered them last year.

They are a half oval section not a half round.
The bit you need, is that they are 140mm high in the centre, add a bit for the seat base and you should be near enough.
For the record, are 260mm accross the base and 670mm long.

Hope that helps.

Nasher.

[Hightower]

Thanks Nasher, I guess these would squish down a bit when sat on, but it gives me something to work on.

I suppose it's off to the Stainless Fabricators tomorrow.

Andy

Originally Posted by Nasher

Andy

I still have the measurements of the foam from inside my jockeys from when I re-upholstered them last year.

They are a half oval section not a half round.
The bit you need, is that they are 140mm high in the centre, add a bit for the seat base and you should be near enough.
For the record, are 260mm accross the base and 670mm long.

Hope that helps.

Nasher.