More horses! - Page 4

Kernow Buoy · 24 March 2009, 07:33

Hi Fred, where you been? I for one have missed your input, more please!

codprawn · 25 March 2009, 15:13

Quote:

Originally Posted by fast fred

well good to see this is still hear, thanks to all who took the time to say what they think of my stuff

Where have you been Fred - we've been missing you!!!

Bigmuz7 · 26 March 2009, 07:29

Yea ..too right ... a good mix of pics and technical info was very informative Fred ....

fast fred · 30 March 2009, 20:04

thanks guys, ya had some crap to settle. anyway talk about timing
timing for a 2 stroke outboard. first you must forget all that you know about timing cuzz it does not apply.

ok on an outboard the more advance timin the harder it's guna pull to 6000rpms,
the more timin it has at 6000 and above the faster it burns down

so we can do one of two things, set timin low at 18-20deg advance, slow on the pull but right about 5200 or so she's guna turn ON and she'll be fine even if i let her go above 9000

OR we can set it at 24deg for the pull to 6000, then when she gets there (6000rpm's) we can use a soilinoid to push it back (timin) so you can still pull to the top and stay there with out the burn down

codprawn · 03 April 2009, 00:13

I think Fred is a relation of Garfs - good work though!!!

Bigmuz7 · 03 April 2009, 21:35

Quote:

Originally Posted by codprawn

I think Fred is a relation of Garfs - good work though!!!

Nah .. I think if you and GarF were mates.. you'd be the straight guy... a bit like Eric and little Ern * slaps Codprawns head .. shouting Wahey".. whilst flipping NHS glasses up and down

fast fred · 28 May 2009, 17:17

some fresh exhaust addapter

fast fred · 28 May 2009, 17:22

goes on hear

fast fred · 28 May 2009, 17:29

ya, sorry to them that sent pm's, i don't allways check them.

charlesrg · 28 December 2009, 19:48

Fast Fred, how do I get in touch with you ? Can you send me your contact info ?
It's about some racing 50HP short shafts that we need to purchase.

Nos4r2 · 29 December 2009, 18:56

Fred hasn't posted for a while. You might want to send him an email via this site. (click here:- http://rib.net/forum/sendmessage.php...lmember&u=3220 )

Bigmuz7 · 29 December 2009, 21:55

Yeah Fred .... come back .. us tech heads mis you

fast fred · 05 January 2010, 10:59

charlesrg · 06 January 2010, 05:57

Quote:

Originally Posted by fast fred

Hey Fred, did you get my PM ? I'm looking for a 50HP short shaft tiller.

fast fred · 06 January 2010, 10:52

The Burg, he's out of FL, he'll have a 50hp or 70hp for ya, most likely a Yama.

a short shaft OMC be another Idea for ya

charlesrg · 06 January 2010, 18:28

Quote:

Originally Posted by fast fred

The Burg, he's out of FL, he'll have a 50hp or 70hp for ya, most likely a Yama.

a short shaft OMC be another Idea for ya

Who's "The Burg" ? Do you know how to contact Him ?
Also, it's not a problem if we have to ship. It is not too expansive to do a cargo freight to here.

If you have something let me know. It does not need to be race prepared.
Short OMC is fine too.
Please let me know if you have anything or if you have the contact for "The Burg".

Bigmuz7 · 06 January 2010, 20:55

Quote:

Originally Posted by charlesrg

Who's "The Burg" ? Do you know how to contact Him ?

Isnt he/they from Star Trek

.. prepare to be assimilated

charlesrg · 06 January 2010, 23:12

Also I have a 20 inch shaft M50D2 that I want to convert to 15" shaft.
Does anybody have a DRIVESHAFT HOUSING S (AMB), WATER PIPE S, CAM ROD S, DRIVE SHAFT S ?

(I put 5 hours on it. Still going slow as I'm still breaking in the engine. )

If anybody wants the 20" shaft I can exchange.

charlesrg · 13 January 2010, 22:59

Hey Fast Fred, please let me know a way to contact you or "TheBurg". I'm still looking for the 50HP Short Shaft, Tiller Handle, Manual Start.

Please let me know.

thanks

9D280 · 28 January 2010, 13:42

Here's one for you: Not so much for more power but more economy (well..... OK..... and when I open it up it might be a bit more fun

) - As my clamshell's in bits, any simple mods to the intake / exhaust ports make it breathe more easily? There's a fair few split lines on the casting in my inlet, and it strikes me I could get a touch more air in, but then if it's got the ridges, is the fuel / air better mixed because of the turbulence they create.......

Might as well do it while it's in bits.....

A quick thought with your solenoid powered variable spark advance - Would it be better to have the solenoid push the advance at lower RPM, that way if the solenoid packs up or the wiring disconnects itself you just loose a bit of low end oomph, rather than killing the engine........