Bit of advice needed please

[Ghostrider]

After having some of the best fun i have had on my 4.7,it is going up to Mike to have some upgrades.

New console single dive in grey with built in tank
New anchor box in grey
New flow coat floor in grey
New non slip floor in back
New box made to go in between the A frame for dry storage or to fit the beers in lol
Leaving the hull alone

Has anyone any better ideas

Cheers Steve

[Boatnomad]

+1 for Grey/Black

[colcreate]

Originally Posted by Boatnomad

+1 for Grey/Black

No Nooo BLACK with Grey

[Ghostrider]

Originally Posted by colcreate

No Nooo BLACK with Grey

So black console and Grey non slip

[PeterM]

grey floor grey console..... bigger engine

[willk]

Personally, I'd leave it alone - it's fine as it is, IMO. I'd save the money for me next boat. There's always a next boat...

[Ghostrider]

Originally Posted by willk

Personally, I'd leave it alone - it's fine as it is, IMO. I'd save the money for me next boat. There's always a next boat...

The problem is after the ops I have had the console is to low

[Ghostrider]

Originally Posted by PeterM

grey floor grey console..... bigger engine

Bigger engine next year lol

[whisper]

Originally Posted by Ghostrider

After having some of the best fun i have had on my 4.7,it is going up to Mike to have some upgrades.

New console single dive in grey with built in tank
New anchor box in grey
New flow coat floor in grey
New non slip floor in back
New box made to go in between the A frame for dry storage or to fit the beers in lol
Leaving the hull alone

Has anyone any better ideas

Cheers Steve

I think you have this spot on, but I would go with a double console and leave out the rear box

[Ghostrider]

Have got the original ral colour for the hull would you but the new console in the same colour to keep it original and put a grey non slip floor what would you do need to decide

[whisper]

Originally Posted by Ghostrider

Have got the original ral colour for the hull would you but the new console in the same colour to keep it original and put a grey non slip floor what would you do need to decide

This is the pigment, however you will need to add it to clear gelcoat and then add a little white gelcoat to it in very small amounts until you have the exact colour due to the fading from the original colour which goes quite deep into the gell on the Ivory ribs

Ivory Pigment For Polyester Gelcoat Resin 100g | eBay