Zodiac Cadett 230 Roll up

[Andrew1974]

Good morning all, hoping you can help.

I have a 3m boat for fishing (fox brand fishing boat) and wanted another boat to tow some other essentials in it when fishing for carp in France. I purchased a second hand Zodiac cadett which the seller claimed need a new boat pump hose attachment.

The boat is in excellent condition but the hose supplied isn’t broken, it just does not fit. It has a bayonet type hose but does seem deep enough to be able to go into the valve and twist, it just won’t engage.

I’m just wondering if any of you can help as I can’t find any info online as to which hose or attachment to buy for it. I’ve seen this one online which may fit … Bravo Twin Thickness Inflation Adaptor for Standard & Small Hose SP118….
And another one …. Zodiac Semi Recessed Valve Inflate Adaptor 21mm Z6706….
Any help is appreciated as my other boat is a dead simple bayonet attachment,


Thanks in advance,
Andy.

[Fenlander]

Hello and welcome to the forum. A picture of your valve would help us ID the connector you need. Many Zodiacs have a tapered end on the pump hose that is just a friction push fit in the valve.

Like this...

https://www.ribstore.co.uk/products/...4-8da2f50db4ee

[Andrew1974]

[Andrew1974]

Thanks Fenlander image attached

[Fenlander]

Yep that’s the valve that needs the taper end. Same as my valves.

[Andrew1974]

Many thanks, I’ll order one in the link you provided, thanks again