Slatted floor

[A1o]

Hi All,

I’ve managed to snap two of the wooden Slats on my Plastimo P240SL

Any idea where I can get replacements or is it a case of getting Marine Plywood cut to size and sealing wood? Any suggestions on where to get this done?

Measurements I’ve got are 34 Inches by 6 with a depth of about 10mm

Failing that is there a plastic alternative I could use that would be more flexible?

Any advice appreciated.

Thanks!

[Limecc]

Originally Posted by A1o

Hi All,

I’ve managed to snap two of the wooden Slats on my Plastimo P240SL

Any idea where I can get replacements or is it a case of getting Marine Plywood cut to size and sealing wood? Any suggestions on where to get this done?

Measurements I’ve got are 34 Inches by 6 with a depth of about 10mm

Failing that is there a plastic alternative I could use that would be more flexible?

Any advice appreciated.

Thanks!

I would be looking to get some HDPE sheet from Trent Plastics I think trentplastics.co.uk
They cut to size to minimize cost/waste and are also on ebay.

[A1o]

Took your recommendation and ordered, new slates arrived today, much better!!

Thank you!