Reply
 
Thread Tools Search this Thread
 
Old 24 September 2021, 22:56   #1
Member
 
Country: Canada
Town: Comox
Length: 5m +
Join Date: Sep 2021
Posts: 2
Advice for fitting a trailer to Bombard C5

Hello, I'm looking for some advice for customizing my EZ Loader 14-17' trailer for my Bombard C5. The boat lives on the trailer so I figure I better get it supported well. I've attached some photos to show what the current set up is. Right now the keel is taking most of the weight and the tubes are on the top of the wheel wells. What part of the boat should take most of the weight? Should the tubes be supported throughout? I've done a search of the forum but can't find much about his so I appreciate any help (and even better with photos) if anyone has experience with this. Thanks!





__________________
hartmand3 is offline   Reply With Quote
Old 25 September 2021, 17:28   #2
Member
 
Country: UK - Wales
Town: Cardiff
Length: no boat
Join Date: Aug 2014
Posts: 2,018
You want slightly higher and much wider bunks under the tubes stop them rubbing in the wheel arch

Transom takes all the weight of the motor so a central support will help remover you only need to lift the transom slightly to launch

Example of a sib trailer here https://shop.chastheboat.co.uk/produ...31854519222330
__________________
HDAV is offline   Reply With Quote
Old 25 September 2021, 17:33   #3
Member
 
Country: UK - Wales
Town: Cardiff
Length: no boat
Join Date: Aug 2014
Posts: 2,018
The second one here is a good guide too

https://www.degraafftrailers.co.uk/i...-boat-trailers
__________________
HDAV is offline   Reply With Quote
Old 25 September 2021, 20:17   #4
Member
 
Country: UK - England
Town: Retford
Boat name: Spy-sea-one
Make: Excel 435
Length: 4m +
Engine: Suzuki Outboard/25/4
Join Date: Oct 2011
Posts: 7,441
RIBase
I’ve done an extensive build thread on my latest boat including trailer mods it might help
__________________
jeffstevens763@g is offline   Reply With Quote
Old 25 September 2021, 21:48   #5
Member
 
Country: UK - Scotland
Make: HumberOceanOffshore
Length: 8m +
Engine: Volvo KAD300/DPX
Join Date: Oct 2002
Posts: 5,596
Years ago I had a Bombard C5 on a trailer, I supported it under the tubes just where the tubes join the hull, also a forward support to just take the bow weight and act as a steadying guide. There was nothing under the transom so no wear at the stern. If I come across a picture I'll post it for you.
__________________
JW.
jwalker is offline   Reply With Quote
Old 26 September 2021, 20:07   #6
Member
 
Country: Canada
Town: Comox
Length: 5m +
Join Date: Sep 2021
Posts: 2
All this info is excellent! Thank for the replies. I like the look of the Degraaf Trailers with the 10" support over the wheel well. I see that the way I have it now is also likely pushing the transom up as the joint between the tops of the transom and the tubes is starting to separate a bit.
__________________
hartmand3 is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off




All times are GMT. The time now is 09:14.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.