Reply
 
Thread Tools Search this Thread
 
Old 14 November 2016, 23:05   #61
Member
 
Country: UK - Scotland
Boat name: Wildheart
Make: Humber/Delta Seasafe
Length: 5m +
Engine: Merc 60 Clamshell
MMSI: 235068449
Join Date: Apr 2007
Posts: 4,670
Quote:
Originally Posted by Poly View Post
It depends why people claim that, I understood it was an issue with the load now being considered part of the trailer and thus for many ribs exceeding the width limits (without the permitted load overhang).
Is that not why ribs come in 3 beam "flavours"?

2m to get through a standard garage door
2.3m to stay "road legal" without deflation
2.6m I believe will deflate and if you strap the toobs in is around the 2.3m beam mark. (seen a few Pacs on the back of artics (lorries, not the other flavour of rib!) on the A90 like that)
>2.6m it's a police escort & a ton of paperwork
__________________
9D280 is offline   Reply With Quote
Old 19 November 2016, 19:00   #62
RIBnet admin team
 
Poly's Avatar
 
Country: UK - Scotland
Boat name: imposter
Make: FunYak
Length: 3m +
Engine: Tohatsu 30HP
MMSI: 235089819
Join Date: Sep 2005
Posts: 11,622
Quote:
Originally Posted by 9D280 View Post
Is that not why ribs come in 3 beam "flavours"?

2m to get through a standard garage door
2.3m to stay "road legal" without deflation
2.6m I believe will deflate and if you strap the toobs in is around the 2.3m beam mark. (seen a few Pacs on the back of artics (lorries, not the other flavour of rib!) on the A90 like that)
>2.6m it's a police escort & a ton of paperwork
Yes, although the rules have changed:

Trailer allowed up to 2.55m and 0.305m side overhang permitted, provided not over 2.9m in total.
__________________
Poly is offline   Reply With Quote
Old 05 March 2017, 19:23   #63
Member
 
Country: USA
Town: San Diego.California
Boat name: Bayshots
Make: XS-550
Length: 5m +
Engine: Suzuki DF90
Join Date: May 2004
Posts: 877
Got tired of replacing my trailer mounted one's, so made a rig out of schedule 80 PVC pipe I had lying around.
Quick to slide on and off my guide- ons and a lot more confident that they will work consistently !
A couple of glued joints and foam insulation (across the engine ) and good to go !
cheers Dal
Attached Thumbnails
Click image for larger version

Name:	DAL_0001 (Large).jpg
Views:	271
Size:	154.6 KB
ID:	118330  
__________________
www.Bayshots.com
limeydal is offline   Reply With Quote
Old 05 March 2017, 19:32   #64
Member
 
Maximus's Avatar
 
Country: UK - England
Town: Wild West
Boat name: No Boat
Make: No Boat
Length: under 3m
Join Date: Jan 2008
Posts: 5,305
Send a message via AIM to Maximus
Quote:
Originally Posted by limeydal View Post
Got tired of replacing my trailer mounted one's, so made a rig out of schedule 80 PVC pipe I had lying around.
Quick to slide on and off my guide- ons and a lot more confident that they will work consistently !
A couple of glued joints and foam insulation (across the engine ) and good to go !
cheers Dal
Bit like a Trailer Board then.....
Just Homemade, bigger,not as robust ,and harder to store
__________________
A clever Man learns by his mistakes..
A Wise Man learns by other people's!

The Road to HELL ..is Paved with "Good inventions!"
Maximus is offline   Reply With Quote
Old 05 March 2017, 23:22   #65
Member
 
Country: USA
Town: San Diego.California
Boat name: Bayshots
Make: XS-550
Length: 5m +
Engine: Suzuki DF90
Join Date: May 2004
Posts: 877
Yes, that's why I posted on "Trailer board thread "
Sorry, didn't know it had to be on a board !
Used stuff I already had around and does the job !
__________________
www.Bayshots.com
limeydal is offline   Reply With Quote
Old 05 March 2017, 23:29   #66
RIBnet admin team
 
Poly's Avatar
 
Country: UK - Scotland
Boat name: imposter
Make: FunYak
Length: 3m +
Engine: Tohatsu 30HP
MMSI: 235089819
Join Date: Sep 2005
Posts: 11,622
Quote:
Originally Posted by Maximus View Post
Bit like a Trailer Board then.....
Just Homemade, bigger,not as robust ,and harder to store
Actually I thought it was not bad. Compared to many trailer boards I see literally flapping round this looked like a good way of attaching - surprisingly not all trailers actually come with a robust way of adding an easily removable board! Storage is only really an issue whilst launching as it can live on the trailer the rest of the time. But I suspect it may fall foul of the UK height requirements for lights.
__________________
Poly is offline   Reply With Quote
Old 06 March 2017, 05:39   #67
Member
 
beerbelly's Avatar
 
Country: UK - England
Town: teesside
Boat name: magic
Make: humber 5.5
Length: 5m +
Engine: mariner 115
MMSI: 232012453
Join Date: Apr 2014
Posts: 1,497
and what are the uk requirement for height of lights I hang my trailer board off the a frame I know its not technically attached to the trailer but I have had bobbies behind me and never had them stop me
__________________
beerbelly is offline   Reply With Quote
Old 06 March 2017, 08:05   #68
Member
 
Maximus's Avatar
 
Country: UK - England
Town: Wild West
Boat name: No Boat
Make: No Boat
Length: under 3m
Join Date: Jan 2008
Posts: 5,305
Send a message via AIM to Maximus
Quote:
Originally Posted by Poly View Post
Actually I thought it was not bad. Compared to many trailer boards I see literally flapping round this looked like a good way of attaching - surprisingly not all trailers actually come with a robust way of adding an easily removable board! Storage is only really an issue whilst launching as it can live on the trailer the rest of the time. But I suspect it may fall foul of the UK height requirements for lights.
With BRAND NEW pretty decently made legally compliant L.E.D Trailer boards available for well under £25!!...I really think time is better spent in other directions....if you've not the Wit to fit one securely and legally you ARE in trouble!....
and as for "Flapping" certainly seems to me most On line Forums wouldn't last long without pandering to it!
__________________
A clever Man learns by his mistakes..
A Wise Man learns by other people's!

The Road to HELL ..is Paved with "Good inventions!"
Maximus is offline   Reply With Quote
Old 06 March 2017, 08:20   #69
Member
 
Maximus's Avatar
 
Country: UK - England
Town: Wild West
Boat name: No Boat
Make: No Boat
Length: under 3m
Join Date: Jan 2008
Posts: 5,305
Send a message via AIM to Maximus
Quote:
Originally Posted by beerbelly View Post
and what are the uk requirement for height of lights I hang my trailer board off the a frame I know its not technically attached to the trailer but I have had bobbies behind me and never had them stop me
I've been towing Cars Boats Trailers Box Trailers and Plant for Decades been stopped just twice (once light was out)...lights/load/tyres checked and and sent on my way.
All good!
You can stress and obsess about the minutiae of legislation (which is changing continually) or use common sense do your best,maintain your RIG and get on with things...in this case Boating!!
__________________
A clever Man learns by his mistakes..
A Wise Man learns by other people's!

The Road to HELL ..is Paved with "Good inventions!"
Maximus is offline   Reply With Quote
Old 06 March 2017, 08:41   #70
Member
 
Pikey Dave's Avatar
 
Country: UK - England
Town: South Yorks
Boat name: Black Pig
Make: Ribcraft
Length: 5m +
Engine: DF140a
MMSI: 235111389
Join Date: Feb 2008
Posts: 11,883
RIBase
Quote:
Originally Posted by Maximus View Post
I've been towing Cars Boats Trailers Box Trailers and Plant for Decades been stopped just twice (once light was out)...lights/load/tyres checked and and sent on my way.
All good!
You can stress and obsess about the minutiae of legislation (which is changing continually) or use common sense do your best,maintain your RIG and get on with things...in this case Boating!!


[emoji106]Likewise. I used to hang the trailer board off the "A" frame on the first boat, never got stopped, but that was 20 odd years ago, plod/VOSA might be keener now. I once towed a trailer all the way from Aberdeen to Yorkshire without lights & got stopped about 5 miles from home, got a slapped wrist & sent on my way. I'm a big believer in "if it looks right, it is right". You can have a legal POS, or a technically illegal setup that works, I'd go for the latter every time.
__________________
Rule#2: Never argue with an idiot. He'll drag you down to his level & then beat you with experience.
Rule#3: Tha' can't educate pork.
Rule#4:Don't feed the troll
Pikey Dave is offline   Reply With Quote
Old 06 March 2017, 14:49   #71
RIBnet admin team
 
Poly's Avatar
 
Country: UK - Scotland
Boat name: imposter
Make: FunYak
Length: 3m +
Engine: Tohatsu 30HP
MMSI: 235089819
Join Date: Sep 2005
Posts: 11,622
[quote = Beerbelly]and what are the uk requirement for height of lights [/quote] light board should be no more than 1m off the ground officially...

Quote:
Originally Posted by Maximus View Post
You can stress and obsess about the minutiae of legislation (which is changing continually) or use common sense do your best,
the rules on trailer lights haven't changed in quite some time - so doing your best, is probably following them ;-)

Quote:
Originally Posted by Maximus View Post
...if you've not the Wit to fit one securely and legally you ARE in trouble!...
I take a flapping trailer board as a useful warning that they probably didn't spend too much time checking the trailer hitch either!

Quote:
Originally Posted by Pikey Dave View Post
[emoji106] I used to hang the trailer board off the "A" frame on the first boat, never got stopped, but that was 20 odd years ago, plod/VOSA might be keener now.
probably less likely to actually get stopped now, but more likely if you do they have the rule book in front of them and will be willing to enforce it!
Quote:
I'm a big believer in "if it looks right, it is right". You can have a legal POS, or a technically illegal setup that works, I'd go for the latter every time.
I think if it looks right its likely to get stopped, that doesn't mean it is right though - and there is a third option being both legal and effective.
__________________
Poly is offline   Reply With Quote
Old 06 March 2017, 15:32   #72
Member
 
Pikey Dave's Avatar
 
Country: UK - England
Town: South Yorks
Boat name: Black Pig
Make: Ribcraft
Length: 5m +
Engine: DF140a
MMSI: 235111389
Join Date: Feb 2008
Posts: 11,883
RIBase
Quote:
Originally Posted by Poly View Post

I think if it looks right its likely to get stopped, that doesn't mean it is right though - and there is a third option being both legal and effective.


Did you mean "un-likely"?

I agree that effective & legal is by far the best option, but with boat/trailer combos, legal isn't always the most effective. The main issue (imo naturally[emoji6]) is the height, by nature most (boat) trailer boards tend to be close to the ground & potentially obscured by outboards, straps etc. Also for a driver following a boat, there's a lot going on in terms of colour & shape to distract him from the lights, unlike a boring standard trailer.

Just my 2 penneth
__________________
Rule#2: Never argue with an idiot. He'll drag you down to his level & then beat you with experience.
Rule#3: Tha' can't educate pork.
Rule#4:Don't feed the troll
Pikey Dave is offline   Reply With Quote
Old 06 March 2017, 16:12   #73
Member
 
Last Tango's Avatar
 
Country: UK - Scotland
Town: Denny
Boat name: Highland Bluewater
Length: 6m +
Join Date: Mar 2013
Posts: 1,647
I think your problem would arise if, some day-dreaming clown, ran into the back of you and then, having been so rudely awoken, recognised that the lighting on your boat wasn't lawful.

That could make for some interesting bartering between the insurance company and you might find that you end up coping for the lot
__________________
Last Tango is offline   Reply With Quote
Old 06 March 2017, 16:26   #74
RIBnet admin team
 
Poly's Avatar
 
Country: UK - Scotland
Boat name: imposter
Make: FunYak
Length: 3m +
Engine: Tohatsu 30HP
MMSI: 235089819
Join Date: Sep 2005
Posts: 11,622
Quote:
Originally Posted by Pikey Dave View Post
Did you mean "un-likely"?
Aye. oops. Day job getting in the way again!
__________________
Poly is offline   Reply With Quote
Old 06 March 2017, 16:30   #75
Member
 
Country: UK - Scotland
Town: north ayrshire
Boat name: charlie girl
Make: S/R5.4/regal3760
Length: 10m +
Engine: Suzukidf70 2x6lp 315
Join Date: Jul 2009
Posts: 3,745
Quote:
Originally Posted by Maximus View Post
With BRAND NEW pretty decently made legally compliant L.E.D Trailer boards available for well under £25!!...I really think time is better spent in other directions....if you've not the Wit to fit one securely and legally you ARE in trouble!....
and as for "Flapping" certainly seems to me most On line Forums wouldn't last long without pandering to it!
Which is pretty irrelevant considering the op is in the USA where trailer mounted lights are the norm and boards suitable for local regs are maybe not so readily available
__________________
beamishken is offline   Reply With Quote
Old 06 March 2017, 17:49   #76
Member
 
Maximus's Avatar
 
Country: UK - England
Town: Wild West
Boat name: No Boat
Make: No Boat
Length: under 3m
Join Date: Jan 2008
Posts: 5,305
Send a message via AIM to Maximus
I'm
Quote:
Originally Posted by Poly View Post
[quote = Beerbelly]and what are the uk requirement for height of lights
light board should be no more than 1m off the ground officially...

the rules on trailer lights haven't changed in quite some time - so doing your best, is probably following them ;-)

I take a flapping trailer board as a useful warning that they probably didn't spend too much time checking the trailer hitch either!

probably less likely to actually get stopped now, but more likely if you do they have the rule book in front of them and will be willing to enforce it!
I think if it looks right its likely to get stopped, that doesn't mean it is right though - and there is a third option being both legal and effective.[/QUOTE]

Basically you worry too much young Poly (have too much time on your hands) me ol China
Always like the Legal...and just Love the effective!
__________________
A clever Man learns by his mistakes..
A Wise Man learns by other people's!

The Road to HELL ..is Paved with "Good inventions!"
Maximus is offline   Reply With Quote
Old 06 March 2017, 17:52   #77
Member
 
Maximus's Avatar
 
Country: UK - England
Town: Wild West
Boat name: No Boat
Make: No Boat
Length: under 3m
Join Date: Jan 2008
Posts: 5,305
Send a message via AIM to Maximus
Quote:
Originally Posted by beamishken View Post
Which is pretty irrelevant considering the op is in the USA where trailer mounted lights are the norm and boards suitable for local regs are maybe not so readily available
Maybe...then again
__________________
A clever Man learns by his mistakes..
A Wise Man learns by other people's!

The Road to HELL ..is Paved with "Good inventions!"
Maximus is offline   Reply With Quote
Old 08 March 2017, 06:33   #78
Member
 
Country: Other
Town: istanbul
Make: northstar
Length: 4m +
Engine: evinrude etec 60
Join Date: Mar 2017
Posts: 44
RIBase
does any one try lalizas trailer led light?

my question is are they really waterproof ?
__________________
northstar 4.80 is offline   Reply With Quote
Old 08 March 2017, 09:48   #79
Member
 
Country: UK - Scotland
Town: denny
Boat name: breezy
Make: northcraft
Length: 6m +
Engine: honda 150
Join Date: May 2016
Posts: 888
RIBase
go for led automotive they have a lifetime guarantee and are submersible to 1m
__________________
breezeblock is offline   Reply With Quote
Old 08 March 2017, 10:48   #80
Member
 
lalizas's Avatar
 
Country: Greece
Town: Piraeus
Length: no boat
Join Date: Mar 2017
Posts: 1
Quote:
Originally Posted by northstar 4.80 View Post
does any one try lalizas trailer led light?

my question is are they really waterproof?
Dear northstar, the current model is IP65 Waterproof. After May we will introduce the new series which will be IP67 Watertight.
Save
lalizas is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off




All times are GMT. The time now is 21:08.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.