Reply
 
Thread Tools Search this Thread
 
Old 26 April 2016, 05:45   #21
Member
 
Pikey Dave's Avatar
 
Country: UK - England
Town: South Yorks
Boat name: Black Pig
Make: Ribcraft
Length: 5m +
Engine: DF140a
MMSI: 235111389
Join Date: Feb 2008
Posts: 11,883
RIBase
Quote:
Originally Posted by Bigmuz7 View Post
So you got the battery all sealed PD .. but you still got a connector to the winch exposed ? wont that be bothersome if it gets the inevitable dousing .. and .. are those winches water proofed well ? I take it the sheilds come off so you can flood them with oil ?

The winch is the weak spot, but it's 18" higher than the battery. The winch itself is a big standard trailer winch with a sealed (ish) motor bolted to it. The connector is an Anderson connector. I reckon the winch will take a dousing, but not a submersion. If the water is that high, the winch getting wet is the least of my problems😳


Sh1t happens
__________________
Rule#2: Never argue with an idiot. He'll drag you down to his level & then beat you with experience.
Rule#3: Tha' can't educate pork.
Rule#4:Don't feed the troll
Pikey Dave is offline   Reply With Quote
Old 26 April 2016, 07:10   #22
Member
 
Chris Caton's Avatar
 
Country: UK - England
Town: Wirral & Caernarfon
Boat name: That's Enuff
Make: Revenger & Avon SR4
Length: 7m +
Engine: Honda 150HP & 50HP
Join Date: Jul 2011
Posts: 4,408
I wouldn't be too worried about the winch getting a dousing or even submerged, it's only when the motors get hot you need to worry n I can't see the amount of winching you'll need to do will get the motor very hot, I'd be more concerned with the corrosion of the winch casing etc, but after see the winches at Ty Calch following a couple of seasons constant use, I don't think you've much to worry about PD
__________________
Member of S.A.B.S. (Wirral Division)
Chris Caton is offline   Reply With Quote
Old 26 April 2016, 08:35   #23
Member
 
Pikey Dave's Avatar
 
Country: UK - England
Town: South Yorks
Boat name: Black Pig
Make: Ribcraft
Length: 5m +
Engine: DF140a
MMSI: 235111389
Join Date: Feb 2008
Posts: 11,883
RIBase
Quote:
Originally Posted by Chris Caton View Post
I wouldn't be too worried about the winch getting a dousing or even submerged, it's only when the motors get hot you need to worry n I can't see the amount of winching you'll need to do will get the motor very hot, I'd be more concerned with the corrosion of the winch casing etc, but after see the winches at Ty Calch following a couple of seasons constant use, I don't think you've much to worry about PD

Yup👍 I stripped all the casings off & gave everything a good going over with Metect, I'm not worried😄. The battery box is way over the top, but I needed some kind of box & it was as easy to make a good 'un as a bodge job. The box is also easily removed, so I can put it in the car if I know it'll get a dunking at Ty Calch for example.


Sh1t happens
__________________
Rule#2: Never argue with an idiot. He'll drag you down to his level & then beat you with experience.
Rule#3: Tha' can't educate pork.
Rule#4:Don't feed the troll
Pikey Dave is offline   Reply With Quote
Old 26 April 2016, 09:14   #24
Member
 
Chris Caton's Avatar
 
Country: UK - England
Town: Wirral & Caernarfon
Boat name: That's Enuff
Make: Revenger & Avon SR4
Length: 7m +
Engine: Honda 150HP & 50HP
Join Date: Jul 2011
Posts: 4,408
Electric winch

yeah, best to hide it in the motor at Ty Calch, or Chris n Tom will be bolting it to the tractor while you're out enjoying yourself 😂Click image for larger version

Name:	ImageUploadedByRIB Net1461662065.755398.jpg
Views:	310
Size:	90.0 KB
ID:	112207
__________________
Member of S.A.B.S. (Wirral Division)
Chris Caton is offline   Reply With Quote
Old 04 July 2016, 15:12   #25
Member
 
Bigmuz7's Avatar
 
Country: UK - Scotland
Town: Glasgow
Boat name: stramash
Make: Tornado
Length: 5m +
Engine: Etec 90
Join Date: Feb 2006
Posts: 5,090
Ok ordered it today. My boat is 250 miles away though so I'm going to have to take the winch with me and fit it when I use the boat. My 12V supply will come from my tractor, and I was just going to use croc clips onto its battery, Can any of you boys tell me if I need any special plugs to connect to the winch ?
__________________
Bigmuz7 is offline   Reply With Quote
Old 04 July 2016, 15:13   #26
Member
 
Pikey Dave's Avatar
 
Country: UK - England
Town: South Yorks
Boat name: Black Pig
Make: Ribcraft
Length: 5m +
Engine: DF140a
MMSI: 235111389
Join Date: Feb 2008
Posts: 11,883
RIBase
Quote:
Originally Posted by Bigmuz7 View Post
Ok ordered it today. My boat is 250 miles away though so I'm going to have to take the winch with me and fit it when I use the boat. My 12V supply will come from my tractor, and I was just going to use croc clips onto its battery, Can any of you boys tell me if I need any special plugs to connect to the winch ?

Which winch have you ordered?


Lions led by donkeys
__________________
Rule#2: Never argue with an idiot. He'll drag you down to his level & then beat you with experience.
Rule#3: Tha' can't educate pork.
Rule#4:Don't feed the troll
Pikey Dave is offline   Reply With Quote
Old 04 July 2016, 16:00   #27
Member
 
Bigmuz7's Avatar
 
Country: UK - Scotland
Town: Glasgow
Boat name: stramash
Make: Tornado
Length: 5m +
Engine: Etec 90
Join Date: Feb 2006
Posts: 5,090
The TW 9000 .. its a bit overkill for this boat, but I can keep it for my next which might be a little bigger.
__________________
Bigmuz7 is offline   Reply With Quote
Old 04 July 2016, 16:05   #28
Member
 
jambo's Avatar
 
Country: UK - Scotland
Town: Girvan & Tayvallich
Boat name: Breawatch
Make: Ribcraft
Length: 5m +
Engine: Mercury 150 F/stroke
MMSI: ex directory!!
Join Date: Sep 2008
Posts: 6,203
RIBase
Same as us. It has Anderson connector at winch. I sat mine up with direct feed from X5 battery with the cables included. I leave the cable in a boot compartment when not in use and just plug in when needed. Hope this helps.


Sent from my iPhone using RIB Net
__________________
jambo
'Carpe Diem'
Member of the ebay Blue RIB cover club
Member of SABS ( Scottish West Division)
jambo is offline   Reply With Quote
Old 04 July 2016, 16:09   #29
Member
 
Pikey Dave's Avatar
 
Country: UK - England
Town: South Yorks
Boat name: Black Pig
Make: Ribcraft
Length: 5m +
Engine: DF140a
MMSI: 235111389
Join Date: Feb 2008
Posts: 11,883
RIBase
Quote:
Originally Posted by Bigmuz7 View Post
The TW 9000 .. its a bit overkill for this boat, but I can keep it for my next which might be a little bigger.

In that case, as Billy says, it's a doddle. You get the cables already made up with lugs on one end & the Anderson on the other. Just replace the lugs with croc clips👍


Lions led by donkeys
__________________
Rule#2: Never argue with an idiot. He'll drag you down to his level & then beat you with experience.
Rule#3: Tha' can't educate pork.
Rule#4:Don't feed the troll
Pikey Dave is offline   Reply With Quote
Old 04 July 2016, 16:16   #30
Member
 
Country: UK - Scotland
Town: Kyles of Bute
Make: Humber
Length: 5m +
Engine: Suzuki DF90
Join Date: Oct 2011
Posts: 258
Anderson connector on battery and fly lead in back of truck.Works for me.
__________________
Perroboy is offline   Reply With Quote
Old 04 July 2016, 17:54   #31
Member
 
Bigmuz7's Avatar
 
Country: UK - Scotland
Town: Glasgow
Boat name: stramash
Make: Tornado
Length: 5m +
Engine: Etec 90
Join Date: Feb 2006
Posts: 5,090
Ok Cheers .. pity they dont do a fly lead for it .. more to go wrong I suppose
__________________
Bigmuz7 is offline   Reply With Quote
Old 20 July 2016, 15:10   #32
Member
 
Bigmuz7's Avatar
 
Country: UK - Scotland
Town: Glasgow
Boat name: stramash
Make: Tornado
Length: 5m +
Engine: Etec 90
Join Date: Feb 2006
Posts: 5,090
Well Its certainly quite a substantial unit ! Will deffo haul in my wee rig, probably with a rake of fat beer swilling divers on it at the same time too ... Won a watch with Amazon also, I needed it for the 22nd July .. delivery was quoted as being 18th which I paid extra for, to get it in time. After it failed to show up on the day, and the online delivery estimate then shifted to the 1st of August ... I emailed yesterday (19th) moaning I'd paid extra for faster delivery, so yesterday they refunded the entire shipping costs to my card, afterwhich it arrived later that afternoon ... shhhhhhhhsh
__________________
Bigmuz7 is offline   Reply With Quote
Old 20 July 2016, 15:28   #33
Member
 
Join Date: Jun 2010
Posts: 2,934
What was the total bill Inc any duty buddy if you don't mind?
__________________
Xk59D is offline   Reply With Quote
Old 20 July 2016, 19:30   #34
Member
 
Bigmuz7's Avatar
 
Country: UK - Scotland
Town: Glasgow
Boat name: stramash
Make: Tornado
Length: 5m +
Engine: Etec 90
Join Date: Feb 2006
Posts: 5,090
Quote:
Originally Posted by Xk59D View Post
What was the total bill Inc any duty buddy if you don't mind?
Normal shipping is about £50, I paid £75 for faster shipping which made the total on the card about £500 odds, with the refund it will make it £425 .. but then we are post brexit and I haven't been paying attention to whether exchange rates have had an immediate effect on any USA purchases, as I bought it a few days after the vote, The web site had it at $439. But anything imported after taxes etc .. from the US tends to be in pounds what its listed there at in Dollars Ive found ?
__________________
Bigmuz7 is offline   Reply With Quote
Old 20 July 2016, 19:36   #35
Member
 
tony t's Avatar
 
Country: UK - Wales
Town: west mids /tywyn
Boat name: HAWK
Make: RIBCRAFT/ Suzuki 250
Length: 7m +
Engine: Tohatsu 3.8/15hpsuzi
MMSI: 235086594
Join Date: Apr 2008
Posts: 4,270
Think I might get a winch when I feel old
__________________
When you get to the end of your rope..tie a knot and hang on..!!
Aberdovey Ribs
B.I.O.C.Member
B.S. LEADER
tony t is offline   Reply With Quote
Old 20 July 2016, 19:38   #36
Member
 
Join Date: Jun 2010
Posts: 2,934
everytime this comes up i think about it again, i must refrain.
__________________
Xk59D is offline   Reply With Quote
Old 20 July 2016, 20:04   #37
Member
 
Bigmuz7's Avatar
 
Country: UK - Scotland
Town: Glasgow
Boat name: stramash
Make: Tornado
Length: 5m +
Engine: Etec 90
Join Date: Feb 2006
Posts: 5,090
Quote:
Originally Posted by tony t View Post
Think I might get a winch when I feel old
Don't think you ever winched just had Playboy
__________________
Bigmuz7 is offline   Reply With Quote
Old 20 July 2016, 22:13   #38
Member
 
jambo's Avatar
 
Country: UK - Scotland
Town: Girvan & Tayvallich
Boat name: Breawatch
Make: Ribcraft
Length: 5m +
Engine: Mercury 150 F/stroke
MMSI: ex directory!!
Join Date: Sep 2008
Posts: 6,203
RIBase
Quote:
Originally Posted by Bigmuz7 View Post
Don't think you ever winched just had Playboy

Love it!! You've not lost your touch Bigman. Have a nice holiday 👍👍


Sent from my iPhone using RIB Net
__________________
jambo
'Carpe Diem'
Member of the ebay Blue RIB cover club
Member of SABS ( Scottish West Division)
jambo is offline   Reply With Quote
Old 21 July 2016, 21:10   #39
Member
 
Bigmuz7's Avatar
 
Country: UK - Scotland
Town: Glasgow
Boat name: stramash
Make: Tornado
Length: 5m +
Engine: Etec 90
Join Date: Feb 2006
Posts: 5,090
Quote:
Originally Posted by jambo View Post
Love it!! You've not lost your touch Bigman. Have a nice holiday 👍👍
Thanks fella for your help, and I will do Lobsters look out !! .. we finished last summers lot at Christmas
__________________
Bigmuz7 is offline   Reply With Quote
Old 21 July 2016, 21:18   #40
Member
 
jambo's Avatar
 
Country: UK - Scotland
Town: Girvan & Tayvallich
Boat name: Breawatch
Make: Ribcraft
Length: 5m +
Engine: Mercury 150 F/stroke
MMSI: ex directory!!
Join Date: Sep 2008
Posts: 6,203
RIBase
Cheers mate no problem. 👍👍


Sent from my iPhone using RIB Net
__________________
jambo
'Carpe Diem'
Member of the ebay Blue RIB cover club
Member of SABS ( Scottish West Division)
jambo is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off




All times are GMT. The time now is 01:24.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.