|
Zodiac 733 (2018) with 300HP & V berth enclosed cabin
Zodiac 733 with v berth fully enclosed cabin .
Recently fitted with Scotty down rigger receptacles and mounts for fishing also includes new custom starboard fish cleaning table and rod holders.
New cabin doors for complete privacy in V Berth .
Included new Raymarine Axiom 9 multifunction display and 3-d transducer for optimal fishing .
Icom evinrude display .
Premium Shoxs seats and custom foot rests .for helm and passenger
Bench seat at rear and two additional seats at front.
Anchor chain and rode 350feet.
Mounts for kayaks and also paddle boards.
Diving mounts for dive tanks .
Zodiac has complete refit everything as new 2018, this is an extremely rare one of a kind boat, and performs incredibly this boat goes anywhere and can either be used for cruising , fishing , diving or multi sport kayak and paddle board use . The zodiac is fully rigged and ready to go .
Trailer included.
Dimensions
LOA: 27 ft 0 in
Beam: 8 ft 0 in
Engines
Total Power: 315 HP
Engine 1:
Engine Brand: Evinrude
Year Built: 2017
Engine Model: G2 E-TEC
Engine Type: Outboard
Engine/Fuel Type: Gas/Petrol
Engine Hours: 25
Engine Power: 300 HP
Propeller: 4 blade
Engine 2:
Engine Brand: Evinrude
Year Built: 2017
Engine Model: E-TEC HO
Engine Type: Outboard
Engine/Fuel Type: Gas/Petrol
Location: Port
Engine Hours: 1
Propeller: 3 blade propeller
Engine Power: 15 HP
Refit 2015 - 2018
* Custom made hull by Zodiac in Vancouver, BC -- features increased pitch to handle any sea conditions.
* (February 2015 - June 2015): Vessel stripped back to native-state. Hull taken to 'Extreme Fiberglass' in Nanaimo, BC. Restored hull to original including a new coat of bottom paint.
* (June 2015 - December 2016): Vessel and original aluminum cabin taken to Whiskey Creek Marine to be fitted with a custom built outboard pod -- fabricated and the original boat cabin underwent modifications to raise the ceiling height in the front portion of the cabin. All new windows and a windscreen/wipers were installed in the cabin.
* (January 2016): Ace Inflatables in Qualicum Beach, BC removed and installed brand new inflatable Hypalon Tubes.
* (May 2017): DSS Welding in Duncan, BC. completed fabrication of all aluminum modifications on the cabin including custom anchor locker.
* (June 2017): Fitted with new 300 HP Evinrude E-TEC G2 Outboard and 15 HP Evinrude E-TEC HO Kicker, dual steering, Evinrude ICOM Display & Controls, Custom Steering Wheel, Dual Batteries and Wiring Harness, & Bilge Pump. All work and sea trials were completed by Parker Marine in Nanaimo, BC.
* (July 2017): Aluminum cabin professionally painted Aquatic Blue.
* (August 2017): Full survey of vessel completed.
* (April 2018): Interior of cabin fabricated with new lining and material by Sea Tops in Nanaimo, BC. A custom floor, helm seat, and shock seat for passenger was also fitted.
* (July 2018): Raymarine 9" Axiom GPS/ Chartplotter, 3D Transducer, Anchor (7 lb) w/ 350' chain/ rode and two aft swivel seats (TOTAL seats 7!)
*******V Berth with line and storage sleeps family of 4 easily .
This vessel goes anywhere literally , responsive controls and lots of power,
*****************************************
Additional Information
This particular hull was from the original "Sunrider" that circumnavigated the globe in 1994! . Now with a desired custom pod she WAS the first stern drive RIB vessel that ran on bio-diesel! This boat is one of a kind with unmatched history and bragging rights.
Asking Price $100,000 CDN ($74,000 USD)
__________________
|
Cariboo Cruiser
