yamaha leg anodes

[redbay11]

Hello
can anyone tell me where to get the anodes that bolt onto the bottom of the housing?
cheers

cam

[outboardtech]

mate send me the serial number of engine and will see if i have any

[9D280]

Redbay,

Possibly in my box of bits in my garage! What one do you need? the trim tab on the bottom of the leg or the one across the bottom of the clamp bracket?

I have a set of barely used ones from my now departed 55BE, however I think the trim tab one fits a sizeable proportion of the Yams, It's unscathed & still in it's box. The clamp one may only fit 50-90(ish) Hp, and is slightly corroded (not unrelated to the demise of the engine, but that's another story.....). If you can wait 'till tonight I'll get the part number for you.

[9D280]

Me again.... D'oh! - just realised it's not an outboard you have, but on the assumption of the rules of mass production, and the fact that the bottom half of Mercruiser legs have a lot in common with Merc Gearboxes, here's the info for the trim tab I have

Part number 679-45371-00
O/D of the base - 90mm
"Spigot" on the "dry" side of the plate - dia 65, 1mm high.
Mounting hole M8 x 20 deep

Tab itself drops about 50 from the base, 80 long at the base tapering to around 30 at the bottom.

Weight - 350g.

If it's any use let me know.

[Rogue Wave]

if none of the above works for you then try

http://www.aquafax.co.uk/html/subcategories.asp

http://www.asap-supplies.com/

http://www.mgduff.co.uk/mgduff-produ...og/search.html

should be able to help you If you cal the firms they can probably advise you certainly mcduffs