Reply
 
Thread Tools Search this Thread
 
Old 21 April 2006, 18:44   #1
Member
 
Country: UK - England
Town: leeds area
Boat name: nogo
Make: avon
Length: 5m +
Engine: mariner 60efi 4st 08
MMSI: 235051079
Join Date: Mar 2006
Posts: 70
selva 80 hp impellor

hi does any one know where i can get a impellor to fit my engine, also wot the recomended gap is for the spark plugs. does any one else have a selva engine wot dou you think about them. cheers andy
__________________
avon5.4 is offline   Reply With Quote
Old 21 April 2006, 19:52   #2
Member
 
Tim M's Avatar
 
Country: France
Town: Côte d'Azur
Boat name: Beaver Patrol
Make: Avon Searider SR4
Length: 4m +
Join Date: Jan 2004
Posts: 5,934
I believe a Yamaha impellor will fit a Selva. Someone else should be able to confirm this.....
__________________
Tim M is offline   Reply With Quote
Old 25 April 2006, 10:19   #3
Member
 
Country: UK - England
Town: Poole.
Make: Selva
Length: 5m +
Engine: Outboard - Selva
Join Date: May 2005
Posts: 26
Selva 80 h.p. impeller

You can order spares via the Selva web site www.selvamarine.co.uk

Except for the 5, 6 & 7.5 h.p. models the Selva Four-stroke range 4 to 115 h.p. are totally Yamaha Models with the Selva name on the hood .... however as Selva don't include the 80 h.p. four-stroke in their range you must have a 2T model. ...Spark plug gap is 0.6mm

Mike
__________________
Mike G. is offline   Reply With Quote
Old 25 April 2006, 15:45   #4
Member
 
Country: UK - England
Town: leeds area
Boat name: nogo
Make: avon
Length: 5m +
Engine: mariner 60efi 4st 08
MMSI: 235051079
Join Date: Mar 2006
Posts: 70
thanks for info mike any more tips or info on selva engine , from wot i can make out its a commercial outboard engine but with ptt fitted plus electric start.but no auto lube.
__________________
avon5.4 is offline   Reply With Quote
Old 25 April 2006, 16:04   #5
Member
 
Tim M's Avatar
 
Country: France
Town: Côte d'Azur
Boat name: Beaver Patrol
Make: Avon Searider SR4
Length: 4m +
Join Date: Jan 2004
Posts: 5,934
I know the 100hp HAS got auto lube, with an external oil tank. Could be the same with the 80??

As for what I think of them....noisey (had experiance with the 35 and 100 2-stroke)
__________________
Tim M is offline   Reply With Quote
Old 25 April 2006, 21:14   #6
Member
 
Country: UK - N Ireland
Town: Belfast
Make: Ribcraft 585
Length: 5m +
Engine: Suzuki 140 4/stroke
Join Date: Aug 2003
Posts: 181
RIBase
i have the Selva 35hp only 6 months old, i dont find it noisey. Its a basic engine with no fancy extras ( i even have to mix the oil myself!) but it does whats asked of it and is economical - went from bangor to portpatric + back on one 23 litre tank.
__________________
parm is offline   Reply With Quote
Old 25 April 2006, 21:23   #7
Member
 
Tim M's Avatar
 
Country: France
Town: Côte d'Azur
Boat name: Beaver Patrol
Make: Avon Searider SR4
Length: 4m +
Join Date: Jan 2004
Posts: 5,934
Quote:
Originally Posted by parm
i have the Selva 35hp only 6 months old, i dont find it noisey. Its a basic engine with no fancy extras ( i even have to mix the oil myself!) but it does whats asked of it and is economical - went from bangor to portpatric + back on one 23 litre tank.
The one I had wasnt very new, but it was noisier than my Mariner 40.
__________________
Tim M is offline   Reply With Quote
Old 26 April 2006, 11:48   #8
Member
 
Country: UK - England
Town: Poole.
Make: Selva
Length: 5m +
Engine: Outboard - Selva
Join Date: May 2005
Posts: 26
Selva 80 h.p.

Avon5.4 …… Confirm early Selva engines were pre-mix Models only. However, from 1994, engines above 40 h.p. used the OMC VRO Auto Lube system with the external oil tank. From 2002 Selva fit mechanical oil pump system similar to Yamaha instead of the VRO system but again only on 2T models from 40 h.p. upwards including the LPDFI models. This system has an internal tank under the hood.

Your 80 h.p. pre-mix model with PT was probably manufactured in the late 1980’s or early 1990’s - however, if you remove the engine hpod there is a series number (1000) and engine number stamped into the cylinder block - you need to quote these numbers when ordering parts so you could also request the date of manufacture.
__________________
Mike G. is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off




All times are GMT. The time now is 00:18.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.