Reply
 
Thread Tools Search this Thread
 
Old 24 June 2021, 00:23   #1
Member
 
Country: UK - England
Town: Northam
Boat name: My Boatty Too
Make: Honda
Length: 3m +
Engine: Ymaha 2.5 outboard
Join Date: Aug 2012
Posts: 56
Looking for replacement fuel connector with M10 x 1 thread

Hi all.

This relates to an old Yamaha P185. I've been trying to get a matching hose connector for the male fuel connector on the body, but no luck. So now it's time to replace both with a new matched pair.

The engine fitting shown has an M10 x 1 thread (or could it be slightly more - 1.1mm? Def not 1.5mm). Anyone know of any modern connector with the same thread size so I don't need to drill or retap the engine casing?

Thanks.
Attached Thumbnails
Click image for larger version

Name:	Fuel.JPG
Views:	52
Size:	27.2 KB
ID:	137846  
__________________
Devs Ad is offline   Reply With Quote
Old 24 June 2021, 03:17   #2
Member
 
Country: UK - England
Town: Kent
Boat name: ever dry
Make: Elling KB350
Length: 3m +
Engine: Yamaha 15hp 2 stroke
Join Date: Jun 2020
Posts: 617
Not sure if this is a help or hindrance but here is a chart of fittings.


fuel connectors.png
Attached Thumbnails
Click image for larger version

Name:	fuel connectors.png
Views:	60
Size:	85.9 KB
ID:	137847  
__________________
Oldman2 is offline   Reply With Quote
Old 24 June 2021, 08:04   #3
Member
 
Country: UK - England
Town: Northam
Boat name: My Boatty Too
Make: Honda
Length: 3m +
Engine: Ymaha 2.5 outboard
Join Date: Aug 2012
Posts: 56
Thanks again, OM2 - you've helped me before on an earlier thread to do with this blasted connector.


I don't think that chart shows the dim I am after - the size of the mounting thread?


Just hoping someone on here either has a loose Tohatsu fitting they could measure, or perhaps just happens to 'know' (what an exciting companion for a pint :-) )


Cheers.
__________________
Devs Ad is offline   Reply With Quote
Old 24 June 2021, 10:52   #4
Member
 
Country: UK - England
Town: Kent
Boat name: ever dry
Make: Elling KB350
Length: 3m +
Engine: Yamaha 15hp 2 stroke
Join Date: Jun 2020
Posts: 617
M10 x 1mm is a fine thread used on some stainless items. To confirm what you have maybe try a local fastener company to see if they have stock of nuts so you can confirm the thread before searching for the fitting online.
https://www.amazon.co.uk/Bolt-Base-S.../dp/B00LCGK2JK Boltbase have some cheap
__________________
Oldman2 is offline   Reply With Quote
Old 24 June 2021, 11:06   #5
Member
 
Country: UK - Scotland
Town: north ayrshire
Boat name: charlie girl
Make: S/R5.4/regal3760
Length: 10m +
Engine: Suzukidf70 2x6lp 315
Join Date: Jul 2009
Posts: 3,716
M10 comes in three variants 10x1,10×1.25 &10×1.5 it could be any of them measure the no of threads over a 10mm length & divide by 10 & that should make it easier to identify the thread. But I suspect getting a fitting exactly like that may be a challenge unless its from the original manufacturer
__________________
beamishken is offline   Reply With Quote
Old 24 June 2021, 13:10   #6
Member
 
Country: UK - Wales
Town: Pembroke
Boat name: Rapscallion
Make: Humber Destroyer 6.0
Length: 5m +
Engine: E-TEC 150
Join Date: Jul 2006
Posts: 360
Devsad. Vast range of these type of connector sets on the RS website (www.rswww.com). You might find what you're looking for there but as others have said, check thread size & pitch first
__________________
Jon Tallis is offline   Reply With Quote
Old 24 June 2021, 16:37   #7
Member
 
Country: UK - England
Town: Northam
Boat name: My Boatty Too
Make: Honda
Length: 3m +
Engine: Ymaha 2.5 outboard
Join Date: Aug 2012
Posts: 56
Thanks everyone.


As you can see from the photo above, the threaded section isn't all that long, and it's also awkward getting a micrometer in there due to the nut flange. However, I gave it a going-over with a marker pen and rolled it on to an eraser - nice pattern...

6 thread peaks produced, measuring - as accurately as I could with a micrometer - ~5.16mm between the outer ones, which means fractionally over 1mm thread pitch, but quite possibly exactly 1mm allowing for line thickness and other accuracy factors.


OD of thread is 9.48mm, so I'm guessing that's M10 allowing for clearance?
Pretty sure it is M10 x 1, then, unless there's an alternative thread sizing that conforms to the above? I can't find one, tho'. It certainly isn't 1.25mm pitch.


Just need to confirm whether a Tohatsu fitting has M10x1, then...


I'll check out the links above - thank you for that.
__________________
Devs Ad is offline   Reply With Quote
Old 24 June 2021, 19:22   #8
Member
 
Country: UK - Wales
Town: Pembroke
Boat name: Rapscallion
Make: Humber Destroyer 6.0
Length: 5m +
Engine: E-TEC 150
Join Date: Jul 2006
Posts: 360
M10 should be bang on 10mm O/D if formed correctly - but not all are. Metric fine threadforms on the link below. https://www.trfastenings.com/product...ry/metric-fine
__________________
Jon Tallis is offline   Reply With Quote
Old 24 June 2021, 19:29   #9
Member
 
Country: UK - England
Town: Northam
Boat name: My Boatty Too
Make: Honda
Length: 3m +
Engine: Ymaha 2.5 outboard
Join Date: Aug 2012
Posts: 56
Thanks Jon.


Hmm, 9.48mm did strike me as being a bit narrow, but now you've pointed that out it seems a lot narrower!


Lawdie - what the hell size do I have?!


If I can get a matched pair of connectors that happens to have an M10x1 thread, then it's going in there - hook or crook...
__________________
Devs Ad is offline   Reply With Quote
Old 24 June 2021, 20:06   #10
Member
 
Country: UK - Scotland
Town: north ayrshire
Boat name: charlie girl
Make: S/R5.4/regal3760
Length: 10m +
Engine: Suzukidf70 2x6lp 315
Join Date: Jul 2009
Posts: 3,716
3/8 unf is my bet its almost bang on your dimensions
__________________
beamishken is offline   Reply With Quote
Old 25 June 2021, 08:33   #11
Member
 
Country: UK - England
Town: Northam
Boat name: My Boatty Too
Make: Honda
Length: 3m +
Engine: Ymaha 2.5 outboard
Join Date: Aug 2012
Posts: 56
Ah! Thanks, Beam. I guess that also makes sense for such an old motor.

Just checked t'interweb - 24tpi too, so that also figures; fractionally over 1mm spacing.


Many thanks - I think that part of the problem solved. :-)



Now, does anyone know what thread size is used on Tohatsu, Suzuki, any others?!


Cheers.
__________________
Devs Ad is offline   Reply With Quote
Old 01 July 2021, 15:06   #12
Member
 
Country: UK - England
Town: Northam
Boat name: My Boatty Too
Make: Honda
Length: 3m +
Engine: Ymaha 2.5 outboard
Join Date: Aug 2012
Posts: 56
A huge 'thank you' to everyone who replied - with which was essentially the correct info :-)


First, yes the old Yamaha connector (from a P165) has a 3/8UNF thread - thanks BeamishKen.


Tohatsu connectors, for info, are M10 x 1.25


Cheers.
__________________
Devs Ad is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off




All times are GMT. The time now is 03:01.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.