Andre from Parker Ribs popped round today to say hi, he had found one of those air horns that was new in the packet so he dropped it around
So the donor boat is stripped and the trailers have been swapped over, spent far too long setting the trailer up though.....
Normally with a Degraff and a searider you have to have all the rollers near the keel but we moved the rear ones out which looks good but as Neil said the front ones sits right were the chines change direction so it will need looking at and the winch post too. One thing I will say is that we should think about it being launched in shallow water like at baiter etc so may be in tight to the keel may be better?
Degraff are really good so they should be able to help if we need them
I'll take a pic of mine tomorrow.
The front hoist is connected to the R4M and the rear hoist is connected to the outboard to help you lot with the trailer set up, engine service and deck flow
The keys are in a box on the console, the wheel bearings that we got free with the tailer are on the spare wheel and all the cables are on the floor on the lefthand side of the workshop
Thanks for letting us use your Man Cave today Biff
The whole deck will be flowed all one colour 
