Pacific 22 Project

[Lets go boating]

Hi peeps hope you are well, this thread is about the rebuild of a 1991 pacific 22, it is being converted to outboard with new deck, seating, fuel tanks etc.

The first 4 videos of the project have been uploaded to Youtube linked below, I will add new links as and when I upload the next stage of the build.

Part 1 - Boat Tour - https://youtu.be/R3e0H8IlOTw

Part 2 - Tube Removal - https://youtu.be/ZmC5VoTfhvQ

Part 3 - Engine removal - https://youtu.be/r0VUXuPKqiY

Part 4 - Top Deck Removal - https://youtu.be/cKOi3cSmmxk

Hope you enjoy.

[GuyC]

They always say that owner's look like their dogs. I'm thinking the same might be true about Pac 22's

Good project.

I left the rear lifting points on as they provide a good point to attach a tie down strap to by bringing it in through the freeing ports plus you can use them as part of a towing bridle.

[A1an]

Subscribed

[jeffstevens763@g]

+1

[Maximus]

Originally Posted by jeffstevens763@g

+1

+2

[Lets go boating]

thank you guys, there has been a little more progress but the weather here has been torrential, but, its now fully stripped, il upload pics as soon as I can for you all.

[tony t]

Looking good Greg
I hope there’s a seat for me on the 1st run out when it’s finished [emoji4]

[Lets go boating]

Part 5 of the Build Transom

Part 6 is coming Very Soon.

https://youtu.be/sVU7OsTsQlE

[Lets go boating]

Part 6 Fibreglassing the Transom

https://youtu.be/SwQj54u6MIs

[Lets go boating]

Part 7
https://youtu.be/jFaT-VfpGp4

[GuyC]

Originally Posted by GuyC

I left the rear lifting points on as they provide a good point to attach a tie down strap to by bringing it in through the freeing ports plus you can use them as part of a towing bridle.

Except the top of the freeing port saws its way through the tow rope - don't ask me how I know!!

It needs a bit of hose through the freeing port to protect the rope.

The project is looking good.

Grey for the hull gets my vote.

[A.MAC]

Pacific 22 First test run after total rebuild.
All the very best on your project.

https://www.youtube.com/watch?v=QMu8...channel=MYFACE

[Lets go boating]

A Little Update on things.

We are now putting the fuel tanks in, two brand new Tanks, 160ltrs each, here is a picture of the brackets being welding in situ.

Spoke to Suzuki at the Southampton Boat Show, and we may have an engine coming in the next 2-3months 300Hp fingers Crossed.

Things are now coming along nicely.

we have received Raymarine's Axiom System ready to install when we can and and Icom Radio.

[Lets go boating]

https://youtu.be/udcQuxjhEEo

Here we are fitting the Fuel Tanks into the Pac 22.

Enjoy

[Lets go boating]

Originally Posted by A.MAC

Pacific 22 First test run after total rebuild.
All the very best on your project.

That looks great and a stunning location where is it?

[Lets go boating]

Here is the latest instalment, the top deck is fibreglassed on.

https://youtu.be/F3wlFpMXTRw

[Lets go boating]

The Boat Has Now been Water Tested.

Hear are the final videos.

Part 12 - https://youtu.be/_Iy1SEU_LbA

Part 13 - https://youtu.be/FJB4Rv2Gbgo

Part 14 - https://youtu.be/JemlE45Yp4Y

[A.MAC]

Originally Posted by Lets go boating

That looks great and a stunning location where is it?

Apologies not getting back sooner, location River Clyde, all going well till turbo crapped out, closely followed by trailer axels.

All back together and a big thank you to SBS trailers for providing 2x 1600 kg axels, 5 new wheels and associated bits n bobs, their assistance is greatly appreciated.

SBS Trailers Phone Number 01902 754 133