Reply
 
Thread Tools Search this Thread
 
Old 15 May 2021, 11:57   #1
Member
 
Country: UK - England
Town: East Anglia
Boat name: Nimrod II
Make: Aerotec 380
Length: 3m +
Engine: Tohatsu 9.8 2-stroke
Join Date: Nov 2007
Posts: 6,570
Stainless Transom Wheels (unused)

Stainless transom wheels new/unused.

The same ones as these at 129...

https://www.ebay.co.uk/itm/154390738...wAAOSwSFJgXh7R

My favoured transom wheel type (think they are Trem or Osculati) bough new a couple of months ago before my SIB arrived but I found they don't fit due to it's shallow transom on the semi-cat style hull.

The important dimension is their upper and lower fixings are 26cm apart so you need a transom that will comfortably allow that. Otherwise they are very easy to fit needing just two holes per leg. The lower bracket on the leg hooks under the button you fit to the transom and then the top of the leg is tightened by the knurled knob with thread. This means when you take them off to pack the boat there is just the small rounded button but otherwise nothing to snag the tubes.

If you want to take the wheels on a trip (similar to the Zodiac system) you put them upside down on the transom with the knurled bolt through the alternative thread.

30mm dia tube. 36cm overall dia tyres. Overall length approx 78cm from top of leg to bottom of tyre.

Price 65 inc tracked parcel postage costs with Parcelforce 48 (please double check this cost if Highlands/Islands)

Payment by Paypal.
Attached Thumbnails
Click image for larger version

Name:	Trem wheels.jpg
Views:	34
Size:	125.7 KB
ID:	137405   Click image for larger version

Name:	Trem wheels side.jpg
Views:	31
Size:	110.8 KB
ID:	137406   Click image for larger version

Name:	Trem wheels fittings.jpg
Views:	28
Size:	224.5 KB
ID:	137407   Click image for larger version

Name:	Trems wheels ins.jpg
Views:	31
Size:	91.9 KB
ID:	137408  
__________________

__________________
Fenlander is offline   Reply With Quote
Old 15 May 2021, 13:19   #2
Member
 
Country: UK - England
Town: Huddersfield
Make: Yamaha
Length: 3m +
Engine: Yam 8hp Petrol
Join Date: Aug 2015
Posts: 100
Hi Fenlander

I'm still after some launching wheels and sm very interested !

I have a Yamaha 3.1m STI.. I'm aware of your large knowledge of such things. Any idea if these mounting will be okay on the Yam's transom? If not, please bear with me so I can dig it out and measure!!
__________________

__________________
Flamair is offline   Reply With Quote
Old 15 May 2021, 13:33   #3
Member
 
Country: UK - England
Town: East Anglia
Boat name: Nimrod II
Make: Aerotec 380
Length: 3m +
Engine: Tohatsu 9.8 2-stroke
Join Date: Nov 2007
Posts: 6,570
You will have to measure the transom but usually any short shaft transom will take these... but check first.
__________________
Fenlander is offline   Reply With Quote
Old 15 May 2021, 13:45   #4
Member
 
Country: UK - England
Town: Huddersfield
Make: Yamaha
Length: 3m +
Engine: Yam 8hp Petrol
Join Date: Aug 2015
Posts: 100
Okay.. I've measured and yes they would fit, except that I already have some towing eye holes on there. Utilising one of these would put the lower hole where the bracket for the floor is. The only option would be to mount them closer to the outboard. I fear they would then foul the outboard...

I'll do some more measuring tomorrow and see if I can come up with a solution.
__________________
Flamair is offline   Reply With Quote
Old 16 May 2021, 05:05   #5
Member
 
Country: UK - England
Town: Appley Bridge
Boat name: RedNeck
Make: Excel SD360
Length: 3m +
Engine: Mercury EFI 15HP
MMSI: 235924407
Join Date: Jul 2020
Posts: 771
Hi David, if they are still available I will buy them please. My C Tugs have just snapped off on the slip at Dornie.
If they are can I sort it with you later.
Thanks, Steve
__________________
Steve509926 is offline   Reply With Quote
Old 16 May 2021, 05:42   #6
Member
 
Country: UK - England
Town: East Anglia
Boat name: Nimrod II
Make: Aerotec 380
Length: 3m +
Engine: Tohatsu 9.8 2-stroke
Join Date: Nov 2007
Posts: 6,570
That's a bumpy slip at Dornie Steve! Do you mean you wanted them sent to you at your holiday location to fit up there?

I'm just waiting on Flamair to see if they can be fitted around his existing transom holes and if he can't take them they're yours.

Any news Flamair?
__________________
Fenlander is offline   Reply With Quote
Old 16 May 2021, 06:45   #7
Member
 
Country: UK - England
Town: Appley Bridge
Boat name: RedNeck
Make: Excel SD360
Length: 3m +
Engine: Mercury EFI 15HP
MMSI: 235924407
Join Date: Jul 2020
Posts: 771
Very bumpy, snapped the plastic yoke in two! I'm hopeful that I will be able to solvent weld it back at the caravan. Fortunately I've brought the OB trolley so providing we stay on reasonably smooth slips and a couple of hours each side of high tide we should be able to man handle Redneck down to the water and then fit the OB.
If Flamair dosn't want them, I shall fit them when I'm back home.
__________________
Steve509926 is offline   Reply With Quote
Old 16 May 2021, 08:58   #8
Member
 
Country: UK - England
Town: Huddersfield
Make: Yamaha
Length: 3m +
Engine: Yam 8hp Petrol
Join Date: Aug 2015
Posts: 100
Chaps.. Sorry about the delay - having a bit of a crazy day.

Yes, I believe I can make these fit my 310STI

Fenlander - if you're still okay with me having them, please message me or post on here so i can arrange payment for them.

Many thanks.

Ian
__________________
Flamair is offline   Reply With Quote
Old 16 May 2021, 09:15   #9
Member
 
Country: UK - England
Town: East Anglia
Boat name: Nimrod II
Make: Aerotec 380
Length: 3m +
Engine: Tohatsu 9.8 2-stroke
Join Date: Nov 2007
Posts: 6,570
Ian that's fine I'll PM you.
__________________
Fenlander is offline   Reply With Quote
Old 16 May 2021, 09:17   #10
Member
 
Country: UK - England
Town: Appley Bridge
Boat name: RedNeck
Make: Excel SD360
Length: 3m +
Engine: Mercury EFI 15HP
MMSI: 235924407
Join Date: Jul 2020
Posts: 771
Quote:
Originally Posted by flamair View Post
chaps.. Sorry about the delay - having a bit of a crazy day.

Yes, i believe i can make these fit my 310sti

fenlander - if you're still okay with me having them, please message me or post on here so i can arrange payment for them.

Many thanks.

Ian
__________________
Steve509926 is offline   Reply With Quote
Old 16 May 2021, 09:19   #11
Member
 
Country: UK - England
Town: East Anglia
Boat name: Nimrod II
Make: Aerotec 380
Length: 3m +
Engine: Tohatsu 9.8 2-stroke
Join Date: Nov 2007
Posts: 6,570
Sorry Steve.... the flipside is you're actually out on the boat in Scotland so perhaps the best end of the deal!!
__________________
Fenlander is offline   Reply With Quote
Old 16 May 2021, 09:39   #12
Member
 
Country: UK - England
Town: Appley Bridge
Boat name: RedNeck
Make: Excel SD360
Length: 3m +
Engine: Mercury EFI 15HP
MMSI: 235924407
Join Date: Jul 2020
Posts: 771
Very true, and in glorious sunshine.
__________________
Steve509926 is offline   Reply With Quote
Old 16 May 2021, 11:34   #13
Member
 
Country: UK - England
Town: Huddersfield
Make: Yamaha
Length: 3m +
Engine: Yam 8hp Petrol
Join Date: Aug 2015
Posts: 100
Quote:
Originally Posted by Steve509926 View Post
Sorry Steve... I've not made it out in the boat yet this year, so you're up on me there.
It's taken me 18 months to get around to getting the wheels sorted!!

David - I've PM'd you.

__________________
Flamair is offline   Reply With Quote
Old 16 May 2021, 12:16   #14
Member
 
Country: UK - England
Town: East Anglia
Boat name: Nimrod II
Make: Aerotec 380
Length: 3m +
Engine: Tohatsu 9.8 2-stroke
Join Date: Nov 2007
Posts: 6,570
SOLD & paid thanks.

Packed to post tomorrow. Appreciate your interest guys.
__________________
Fenlander is offline   Reply With Quote
Old 16 May 2021, 12:26   #15
Member
 
Country: UK - Scotland
Town: Aberdeenshire
Length: no boat
Join Date: Apr 2021
Posts: 78
Quote:
Originally Posted by Steve509926 View Post
Hi David, if they are still available I will buy them please. My C Tugs have just snapped off on the slip at Dornie.
If they are can I sort it with you later.
Thanks, Steve
There is a Gael force marine in Inverness if you were really stuck that do have stock of a few different types, but that would be a 4 hr round trip stuck in a car, while you should be enjoying the boating in this good weather
__________________
Brinormeg is online now   Reply With Quote
Old 16 May 2021, 13:59   #16
Member
 
Country: UK - England
Town: Appley Bridge
Boat name: RedNeck
Make: Excel SD360
Length: 3m +
Engine: Mercury EFI 15HP
MMSI: 235924407
Join Date: Jul 2020
Posts: 771
Quote:
Originally Posted by Brinormeg View Post
There is a Gael force marine in Inverness if you were really stuck that do have stock of a few different types, but that would be a 4 hr round trip stuck in a car, while you should be enjoying the boating in this good weather
Thanks for the suggestion. We can still use the SD360 from a lot of slips I just have to plan well and change where I had planned to go. It just means we will have to come here again.

Should have bought those beach rollers David, they would have come into there own on this holiday.
__________________

__________________
Steve509926 is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off




All times are GMT -5. The time now is 07:58.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2021, vBulletin Solutions, Inc.