For Sale: Sea Rider 5.4 commercial a frame

[Rogue Wave]

RIB A-frame with provision for self-righting gear (not included). I was planning to fit to my Avon Searider 6.0 m but fitting would require widening the A frame. The frame is a direct fitting for SR 5.4 and 4.7. In good condition, with exception of minor damage to one nav light guard.

Looking for offers over £140.

I also have a full set of Aquasignals for this which buyer can have for an extra £100

[whisper]

Bargain

[boatways]

Originally Posted by Rogue Wave

RIB A-frame with provision for self-righting gear (not included). I was planning to fit to my Avon Searider 6.0 m but fitting would require widening the A frame. The frame is a direct fitting for SR 5.4 and 4.7. In good condition, with exception of minor damage to one nav light guard.

Looking for offers over £140.

I also have a full set of Aquasignals for this which buyer can have for an extra £100

Greetings what hight is it?need to make sure it will get thought workshop door on the boat!regards Steve

[Anchorhandler]

Hi Stuart

Do you think this would fit an SR4 as well? Im happy to modify it to a certain extent but would prefer that it fits between the tubes from the start.

Cheers
Simon

Sent from my iPhone using Rib.net

[Rogue Wave]

Its kinda awkward to get ro without shifting a couple of boats so the picture isn't great.this picture shows one side of the fixings plates and The transom plates are 37 inches from edge to edge and 32 inches between centres on the holes


Thats 93.98cms edge to edge and 81.28 cms centres for you youngsters.

Sinon as far as I now the SR4's are a little narrower maybe 50mm inches but i think it might be intrusive on an SR4 as it is about 250mm deep. Ihave Just had a look at Roy fleets Jag and I sure I could gaffa it on to the roof when he goes back to work

Steve sorry but I couldnt measure the heigh but it's at least 1.7 metres will confirm Tomorrow

[Anchorhandler]

Originally Posted by Rogue Wave

Roy fleets Jag and I sure I could gaffa it on to the roof when he goes back to work

Our resident Fawley pimp!

I cant believe he brings it down there and parks it 50meters from the waters edge for two weeks at a time...

Will measure the arse of my little SR in the morning to get an idea of what's involved.

Cheers Stu

Simon

Sent from my iPhone using Rib.net

[Rogue Wave]

Originally Posted by Anchorhandler

Our resident Fawley pimp!

I cant believe he brings it down there and parks it 50meters from the waters edge for two weeks at a time...

Will measure the arse of my little SR in the morning to get an idea of what's involved.

Cheers Stu

Simon

Sent from my iPhone using Rib.net

I bet he polishes it a lot,

I'll be able to dig it out properly tomorrow and will furbish fibal measurements. Is your SR at Fawley?

[spartacus]

Originally Posted by whisper

Bargain

That's what I was thinking! +1

[boatways]

Where abouts in the world are you mr wave?

[Rogue Wave]

Im a Welshman living in Southampton england

[Rogue Wave]

Originally Posted by whisper

Bargain

Well I bought it through these ads for 150 poonds. It would be a bit tacky to ask more reall.

[Anchorhandler]

I measured the SR4 today and yes, as you suggested, she does have a narrower arse end.

I'l have to go back to the original plan of fabricating one myself.

Cheers anyway Stu...

Simon

Sent from my iPhone using Rib.net

[Rogue Wave]

No wories its a pity as its only in Warsash not even an hours steam from you

Fot the rest of yoe from the top of the light holder to the bottom of the deck feet it measures 2.3 metres and its widest point from the outside of the light guards 1.4m. I can't convert that to Imperial cos I do it mentally and unfortunately I drank my RYA membership away Last night..so not so clever today ...


Only Joking its

90 and a bit tall 7'6"and a half So I don't see it going into anybodies house garage

54 and a bit wide 4'6" and two thirds

[teamplonker]

Hi
Do you still have the frame for sale, If so do you think it will it fit to the bolt holes on my 5.4 searider.
Is it strong enough to tow from.
Thanks
Lee

[Rogue Wave]

Hi Lee
yes I do

yes it does it also replaces the deck struts

s'pose but I wouldn't tow from any a frame let alone an Ali one. Plenty of people on here will tell you its ok thoigh

hope you are good

cheers Stu

[teamplonker]

Thanks Stu
could i come and take a look at it as im in lee on solent for an hour or two.
Cheers Lee

[matt h]

Originally Posted by Anchorhandler

I measured the SR4 today and yes, as you suggested, she does have a narrower arse end.

I'l have to go back to the original plan of fabricating one myself.

Cheers anyway Stu...

Simon

Sent from my iPhone using Rib.net

Im Selling one on the classifieds!!

[teamplonker]

Originally Posted by matt h

Im Selling one on the classifieds!!

Thanks Matt but I was really looking for something bigger, shame as you are only 10 mins away from me where as stu is 2 hrs.

Thanks
Lee

[Stucky88]

Originally Posted by Rogue Wave

RIB A-frame with provision for self-righting gear (not included). I was planning to fit to my Avon Searider 6.0 m but fitting would require widening the A frame. The frame is a direct fitting for SR 5.4 and 4.7. In good condition, with exception of minor damage to one nav light guard.

Looking for offers over £140.

I also have a full set of Aquasignals for this which buyer can have for an extra £100

Did you sell the A-frame as i'm interested at £140 if you didn't

[teamplonker]

Originally Posted by Stucky88

Did you sell the A-frame as i'm interested at £140 if you didn't

Sorry.
Bought Cut, Coloured and fitted