Feature follow-up: Pacific Console Change

Richard B · 10 April 2003, 23:17

< Edit: Follow-up from the features section. JK >

It's looking good, Pete. Just sorry that I held you up the other weekend. Anyway, great to see it all coming together.

jwalker · 10 April 2003, 23:41

Looks neat, Pete. Well done.

JW.

Andre · 11 April 2003, 09:57

Pete

Did the console look something like on this one?

This particular Pacific 22 was found on the Baltic sea in July 2002 just off the Polish coast by a Polish fishing vessel . They were coming back to port having had a bad day and then this what a catch. I am told it fell overboard from HMS Lanchaster .

Andre

Manos · 11 April 2003, 15:54

Quote:

Originally posted by Pete7
Err perhaps we shouldn't have done this.

Pete the finished product looks very profesional job. Well done.

The only thing I have to say is if you checked with the manufaturers to see if you will compromise hull integridy by opening it up?? May be you shouldn't have done it as you say.

But then again it may be OK time will tell. Welldone!!

Julian · 11 April 2003, 16:21

Pete

Excellent Job, I did the same thing to our old humber years ago with the help of Alan Priddy, Made the boat so much better to handle etc, With stringers like they put in those boats your hull strenght will not be effected, they are seriously strong boats.

Julian

Pete7 · 11 April 2003, 16:34

Julian Hi, yes remeber seeing your rib on the channel island cruise 95 I think. We thought you either mad or very brave to attempt it then, never thought I would be doing one.

Pete7 · 11 April 2003, 16:37

Andre, wish one would fall over board in front of me. Says something for the boat if it survives going over the side of a RN destroyer!

Wonder what the weather was like at the time, dread to think actually.

Manos, haven't actually changed anything as there is already two inspeciton hatches under the standard Pacific console. The main bulkhead between the engine and forward compartment is still in tact, just has a great big fuel tank sat in front of it. Although I am waiting for a warning from Crazyhorse to say someting about CZ curves (what ever they are) or RCD since I have doubled the fuel tank capacity and altered the moments, L1 x W1 = L2 x W2 if I remember correctly, but physics was a long time ago.
Pete

Pete7 · 11 April 2003, 16:44

This one (hull number 8203) is the HMS Sultan training one, sadly most of the fitting have gone, no idea were ?

Manos · 11 April 2003, 16:52

Well then Pete you have a GREAT BOAT!! Nice job.

Pete7 · 11 April 2003, 17:01

To all, thanks for the compliments, I have to admit that going down to the boat in January and laying more and more GRP was soul destroying, didn't do much for my jeans either, but geting the console in was a big boost. Naturally I fitted the steering wheel just so I could go "brum, brum". Quite impressed by the Vetus stuff, well made and managed to get 8% off, from the Port Solent chandlers because the order was quite big, so deals can be done.

Manos · 11 April 2003, 17:04

VETUS are a good company. I have used them and have been 100% satisfied.

Jelly · 14 April 2003, 08:14

Hi Pete
Looking good, the single console always put me off the Halmatic series S/H. Look forward to seeing it!!
Have fun
Jelly

thewavehumper · 14 April 2003, 20:28

Manos You couldn't compromise the Hull integrity of a Pacific with a few grammes of C4, they are hugely strong boats and the decks more of a covering than a stuctural item. The stringers are made by GRP covered 4 by 2 mahogany

I.ve always been impressed by these boats and working on this one has told me why.

Mr. 7 is a very accurate and precise worker and it's been a pleasure to help him, I am learning a lot

Well done Pete for not mentioning what uyou saw on Saturday evening

DM · 14 April 2003, 21:37

Quote:

Originally posted by THEWAVEHUMPER
Well done Pete for not mentioning what uyou saw on Saturday evening

Go on Pete, do tell. Just cos' he helped you with your boat shouldn't let him off the hook.

Oi Stuart, do you still want this fuel tank?

DM

thewavehumper · 15 April 2003, 15:51

yes Dave I do thanks,

We saw a racing boat that had the outboard bracket sheared off on it's maiden voyage. It was obviously a bad casting but the driver an navigator had to be towed in by a sailing yacht.

The irony is in who the navigator was and I stress it wasn't his fault

cheers
Stuart

Fill Smiff · 15 April 2003, 20:16

Pete
What a great conversion. Ever thought of getting a job at Halmatic or even with Manos.
(sorry Manos but you deserved that)
cheers Phil

Manos · 15 April 2003, 22:31

Quote:

Originally posted by THEWAVEHUMPER
Manos You couldn't compromise the Hull integrity of a Pacific with a few grammes of C4, they are hugely strong boats and the decks more of a covering than a stuctural item. The stringers are made by GRP covered 4 by 2 mahogany

Didn't know I was merely making a comment and it was a thought nothing more.

Pete7 · 16 April 2003, 21:42

Phil funny you should say that, I work along side but not for there parent group Vosper Thornycroft. Couldn't work for Manos as I can only lay fibreglass in straight lines not curves like Falcon.

(Sorry Manos, couldn't resist it after you posted that pic of the inside of a Falcon. I look forward to seeing one of these Falcons in the flesh and you making me eat my words).

Pete

Fill Smiff · 26 April 2003, 17:17

Well Pete
Must be the end of easter now as kids have stopped eating chocolate for breakfast so can we have some pics of finished product.
Cheers Phil

crazyhorse · 27 April 2003, 20:41

Pete7 you have certanly worked very hard on the boat and got her into the best nick you can.

My question is would you do it again and how much have you spent.I did the same thing with a yacht and it took me 12 yrs and I loved it,but I lost money when I sold her.

Would you do it again?

We are all different and I can say haveing looked at your pics and the amount of pride/work you have put into her then good luck and I hope you enjoy it,and I look forward to seeing her on the water.