RIBnet Forums

RIBnet Forums (http://www.rib.net/forum/)
-   Trailers & towing (http://www.rib.net/forum/f49/)
-   -   Bramber Trailer (http://www.rib.net/forum/f49/bramber-trailer-71192.html)

Waterbouy 21 February 2016 16:09

Bramber Trailer
 
Good evening,
Iím just starting to get my new to me Bramber trailer in good order. It hasnít really been looked after by the previous owner as wheels are fairly rotten (13Ē rim 4.5J 4 studs on 5.5Ē PCD) hubs seem a bit shot and back plates again rusty. The suspension arms also have some corrosion.
Im struggling to identify parts due to corrosion and no manual. The hubs are AL KO sealed bearing type I think may be 2051 (M12 bolts x 4. 139.7 PCD, 72mm wheel bearing
Do I try and make good or look to put new axles on it?
If so where is best to look for replacement axles?
The trailer was manufactured 19/03/07
Gross weight 2500 kgs
Chassis number R11321

Many thanks Waterbouy

mick 21 February 2016 16:36

Try these http://www.meredithandeyre.co.uk/

Waterbouy 21 February 2016 17:04

Thanks I've looked at the web site I'm a bit unclear what loading axle I should be looking at, my set up now states 2500 kgs on the plate, does that mean each axle is related to 1250 kgs.
Thanks

mick 21 February 2016 17:08

Not sure best ring them to be sure do the axles have a plate on

Waterbouy 21 February 2016 17:24

No plate on the axles have emailed Mersey Trailers a week or so ago as believe they took ownership of Bramber a few years ago waiting for a reply

mick 21 February 2016 17:55

Afik Humber use Bramber give them a call Meredith will make what you want

jeffstevens763@g 22 February 2016 03:44

waterbouy

call mersea trailers 08709099887 they took over bramber trailers got all my stuff from them for my bramber trailer.

cheers

Waterbouy 22 February 2016 16:44

Thanks Jeff I'm in contact with them, I've now identified my axle it is an AL KO B1200 - 1300-1500 kgs, will look around for prices anybody have recommendations ?
Thanks

jeffstevens763@g 23 February 2016 03:07

Quote:

Originally Posted by Waterbouy (Post 707209)
Thanks Jeff I'm in contact with them, I've now identified my axle it is an AL KO B1200 - 1300-1500 kgs, will look around for prices anybody have recommendations ?
Thanks

if you have part numbers look on e-bay, some of the guys on here use trailer guy a quick search on here will reveal decent prices from him.

cheers


All times are GMT -5. The time now is 20:56.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2018, vBulletin Solutions, Inc.