RIBnet Forums

RIBnet Forums (http://www.rib.net/forum/)
-   Bits and pieces (http://www.rib.net/forum/f10/)
-   -   Wanted yamaha 50hp 3 cylinder carbs (http://www.rib.net/forum/f10/wanted-yamaha-50hp-3-cylinder-carbs-33024.html)

howy 04 November 2009 14:55

Wanted yamaha 50hp 3 cylinder carbs
 
Hi,
Has anyone got a set of Yamaha 50hp two stroke (3 cylinder) carbs please.

donegaldan 12 November 2009 13:26

carbs
 
not sure if they suit.
http://cgi.ebay.co.uk/1988-50hp-Yama...item29ffd6bd8a

i am not selling them, just seen them and remembered the post.
g'luck

howy 12 November 2009 16:31

Many Thanks donegaldan,
I have contacted him after you posted this,problem is after shipping is added,they are going to cost over 200.
Was hoping for a set a little cheaper than that.

But many thanks for the post,it was much appreciated.
I will keep on looking,if anyone else knows of any going it would be much appreciated.

donegaldan 15 November 2009 15:14

alternate
 
Contact mcaleesemarine
http://www.mcaleesemarine.com/ - Based in Northern Ireland
I know he had a 50hp he was breaking and selling in parts.
I looked at replacting some stuff, decided not to do it in the end, but might be some cheap 2nd hand stuff.
Would ask for photos before committing to purchase.

Best of luck
DonegalDan

howy 17 November 2009 08:01

Many Thanks again Donegaldan,
I contacted them but they only have two carbs....drat drat and double drat.

So I am still after a set of three carbs for the 3 cylinder 50hp two stroke yamaha

9D280 17 November 2009 08:36

Try DA Marine in Tayport (nr Dundee). He has a huge pile of dead yams.

Other place maybe a bit closer to you was at Pembroke dock. I forget the name, but he had a few broken engines when I was looking for obscure bits.

Even if he only has one carb, if it's the missing one.......

Number's on Yell.com amongst others.

Rogue Wave 21 November 2009 07:08

http://cgi.ebay.co.uk/ws/eBayISAPI.d...=STRK:MEWAX:IT


might have carbs good luck

howy 24 November 2009 18:02

Hi everyone,
Mny thanks for the pm from 118118 and the replies in the other section,but unfortunately I am still on the hunt for some carbs for a 3 cylinder Yamaha 50hp two stroke pull start outboard ( 6H5 ) if anyone knows of anyone breaking the later (1990"s) Yamaha 50 give me a shout please as I am in dire need of a bank of three carbs for this.Its the grey coloured engine.
Many thanks to donegaldan,he didnt have any, also many thanks to 9D280 he only had the 40hp carbs (which still may be an option as they will fit but I will have to get the venturis machined out and upjet the carbs,also have new chokes made) and also thanks to Rogue Wave but unfortunately this was only the older two cylinder engin,but thanks for replying to me.

Regards
Howy

donegaldan 25 November 2009 20:19

longer way to go
 
hey... a searider and a yammie in need of repair, who couldnt help.
Getting a bit more commercial, you can try killen marine,
http://www.killenmarine.ie/
its where i bought my engine last year and she is a 1985 so they deal in spares and repairs,
think they are the main yam importer for ireland, but they pretty much only do yam engines, and they are good at it too.

g'luck
Donegaldan

howy 26 November 2009 16:41

Thanks again Donegaldan,I have trie him,but unfortunately he doesnt have any.
I am beginning to think it would be easier finding the Holy Grail


All times are GMT -5. The time now is 20:34.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2018, vBulletin Solutions, Inc.