RIBnet Forums

RIBnet Forums (http://www.rib.net/forum/)
-   RIBs & ribbing (http://www.rib.net/forum/f8/)
-   -   Drain Plugs (http://www.rib.net/forum/f8/drain-plugs-27798.html)

JSP 30 December 2008 08:18

Drain Plugs
The fitting for the two drain plugs in my SR are just two metal sleeves. I should just be able to buy the plastic plug the grommet and wack them in with sealant and screws? Looks like a 1 inch fitting too?

jyasaki 31 December 2008 22:51

Sounds like they're supposed to have the lever type plugs:


Turning the handle tightens a screw and expands the plug; you set it for a loose to just-snug fit, then flip the handle which expands it more.


All times are GMT -5. The time now is 11:51.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2018, vBulletin Solutions, Inc.