Suzuki NMEA Engine Interface

External Link Notice

Page Information:

Page Title:
Suzuki NMEA Engine Interface

Page Description:
Today I installed the Suzuki NMEA 2000 engine interface which I ordered from the US. The installation was pretty straight forward, though I had to remove the side cover from my DF225 and cut the hydraulic line to my steering to route the NMEA cable. Though that wasn't a problem, the dealer where I got the engine gave some replacement fittings, thanks guys :) The interface cable connects directly to the engines ECU (as pictured), there is also a second connector which displays engine trim

This Page is About:
engine, nmea, suzuki, fuel, interface, cable, info, 2000, directly, displays, flow, system, hour, displayed, lines, lt/per, lowrance, plenty, details, litre, hours, globalmap, 3500c, tested, struggled, cheers, setup, previous, heaps, temp, cylinder, havnt, water, idle, register, remaining, line, steering, hydraulic, df225, route, gave, dealer, problem, cover, side, installation, ordered, installed, today

Continue to External Link →

NOTICE: By following the "Continue to External Link" above you will be leaving RIBnet Forums web site and entering a web site hosted by another party. RIBnet Forums does not have any responsibility for, or control over, any of these sites, their content or their privacy policies. We do not endorse or make any representations about them, or any information, products, or materials found there, or any results that may be obtained from using them. If you decide to access any of the linked third parties, you do so entirely at your own risk.

All times are GMT. The time now is 13:24.