It's been a couple of months now since I've last worked on the hull, there's still a couple of bits to do, but in the meantime I've been working on the console:
1, Filled in all the holes
2, Made a plastic ring so that the new compass will fit
3, Trimmed the rough edges around the console and added a plastic trim.
4, Taped a piece of glass over the large hole and filled with gelcoat and then fibreglassed the inside
5, Recovered the seat
6, Fitted Yam gauges, new steering and an offshore 75 compass
I've also purshased a year 2000 Yam 40 PTT from BHG Marine