Where to source this type of strake?

[Razorbill RIBs]

Can anyone advise where this type of heavy duty strake is available from please (for the Halmatic Pacific)....?

Its got what looks like a galv metal strip inside and is bolted to the hull.......

Want to replace all that is in place and reinstate the missing section which runs the full length of the boat beneath the sponsons....

Many thanks.....

[willk]

That looks like the stuff that is used on trucks? Hard plastic or rubber like? I guess it's the strake that commercial boats use on their sides for protection.

I have no idea where you'll get some, useful aren't I?

[LWman]

Something like this any good? Sorry dont know how to link it:

Fender and Buffer range from Polymax - Delta bumper, for use with Boats, Cars, Trucks and Docks

edit: Ok it linked on its own haha

[paul tilley]

try wilks rubber and plastics

[Razorbill RIBs]

Originally Posted by paul tilley

try 'Willks' rubber and plastics

thought you had no idea where i'd get some Willk

Many thanks LWman.....Paul, the website looks to have the very stuff, thanks

[Razorbill RIBs]

update on this......

we need around 20m of the strake......roughly 2inches wide by 1 inch high. Its basic D section with an aluminium strip inserted through which you bolt....

Wilks had the correct stuff BUT its £32.50 per metre (plus the aluminium strip and tha's not predrilled or anything).....and you need to order 30m minimum.....After first querying whether this was a typo I moved on to alternatives....

Polymax have a suitable alternative cheaper, but still suprised at the cost....anyone got any more suggestions?

I truly can't believe that a sacrificial D section of rubber can be so expensive....Its not as though its held up particularly well if the existing stuff is anything to go by

[Razorbill RIBs]

Okay, please ignore my last..... Have sourced some the right size direct from manuf.....£6.00 /metre + VAT and in correct (no joins) lengths.

Has same side wall thickness too....

[Downhilldai]

Originally Posted by Razorbill RIBs

£6.00 /metre + VAT

Bet that would have frightened you, if you hadn't had wilk's quote first.

[Razorbill RIBs]

Originally Posted by Downhilldai

Bet that would have frightened you, if you hadn't had wilk's quote first.

Cardi ydw i.....

[Declanor]

Sovereign Rubber

these guys have lots of stuff...

[Searider]

Originally Posted by Razorbill RIBs

Okay, please ignore my last..... Have sourced some the right size direct from manuf.....£6.00 /metre + VAT and in correct (no joins) lengths.

Has same side wall thickness too....

Where?

[Razorbill RIBs]

Originally Posted by Searider

Where?

Here you go Welcome To Bridge Rubber And Plastics