Reply
 
Thread Tools Search this Thread
 
Old 26 February 2017, 11:41   #21
Member
 
VanillaIceCream's Avatar
 
Country: USA
Town: Western Colorado
Boat name: Vanilla Ice Cream
Make: Zodiac
Length: 4m +
Engine: 50 Johnson Outboard
Join Date: Apr 2016
Posts: 62
Since there is a time limit to edit my original post and I cannot anymore - let me add this to update and clarify:

On my engine, '98 50HP Johnson with remote controls, electric key start and steering wheel, the kill cord isn't required. If missing, no problem to run the engine, you just don't have a kill cord.

If connected and pulled, engine stops. Engine can be immediately restarted without kill cord.

This is by design for this model, as after replacement of entire switch/key assembly the problem continued - the engine would restart without lanyard. My dealer said they had to do some research and found out this is standard for this model, even he didn't know and thought it was a wiring problem.

I actually prefer the engine to be restarted after pulling the kill cord; just falling overboard while at speed could pull the kill cord off and let it sink or blow away. Loosing the kill cord could leave you totally stranded at sea without a way to restart the engine.

I recommend sailors test their kill cord somewhere safe - close to a dock or while running at home, not out in the middle of the harbor- and learn how to reattach the cord. My kill cord is a little tricky the way it snaps back onto the key switch, the ignition key is at an angle and low, hard to see exactly without reading glasses. Its easier to reattach standing next to the boat.

What I wanted others to know is that not all missing kill cords shut off the motor forever...this was what I learned, and although it worked, the switch was sticky enough the boat may have ran for hundreds of yards before vibrating open, leaving me too far away from the boat to return.

I hope this helps.

I'm very concerned about safety being a pilot and former USN submarine sailor (stationed in Holy Loch!).

Erik
__________________

__________________
VanillaIceCream is offline   Reply With Quote
Old 26 February 2017, 13:01   #22
Member
 
Rover310's Avatar
 
Country: USA
Town: Southwest Colorado
Make: Avon Rover 310 Aero
Length: 3m +
Engine: Evinrude 6hp 2 smoke
Join Date: Apr 2015
Posts: 57
Quote:
Originally Posted by Pikey Dave View Post
You can start earlier Evinrudes without the KC. If the KC is fitted when the engine is started, pulling the KC stops the engine. If the engine is started without the KC, it err! Doesn't .
Quote:
Originally Posted by Pikey Dave View Post
Ownership experience & I'm talking binnacle fixture, not tiller mount.

As far as I'm aware it applies to current Evinrude mechanical controls, sidemount & binnacle mounted.
I was speaking from ownership experience as well.

So I think we can agree that your first statement doesn't apply to all outboards... modern tiller control outboards do not have On/Off key switches, so they have a Run/Stop kill cord that must be re-installed onto the switch in order to restart the motor.
__________________

__________________
Rover310 is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off





Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -5. The time now is 05:46.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2018, vBulletin Solutions, Inc.