Go Back   RIBnet Forums > RIB talk > RIBs & ribbing
Click Here to Login

Reply
 
Thread Tools Search this Thread
 
Old 03 July 2011, 19:22   #1
Member
 
Country: UK - Scotland
Town: Thurso
Make: Gemini Zapcat
Length: 4m +
Engine: Tohatsu 50hp
Join Date: Jun 2006
Posts: 106
Send a message via MSN to bobbyjoeufb
Valiant Rib worth doing up or bin

Been offered a 5.4m Valiant Rib approx 1998 with a Yamaha 50 1995. RIB has sat in a field for last 4 years.

Pumped up the tanks and 3 of them hold air and the 4th one has a 1inch slash in the tank.

The control box has wires hanging out of it where the ignition key should be, control cables and steering slighty stiff but they all move. The engine looks to be complete although not in best nick and not been serviced regulary.

Trailer is non existing and pretty much scrap. Been offered the boat and engine for round about the £400 mark wondering if its worth having a go or give it a miss?



__________________
RYA Powerboat Instructor
bobbyjoeufb is offline   Reply With Quote
Old 03 July 2011, 19:26   #2
Member
 
Country: UK - England
Length: 3m +
Join Date: Aug 2010
Posts: 31
got to be worth a go,i had a similar rib in the same condition(valiant d300)spent a few pounds and i have a useble craft
__________________
soley1 is offline   Reply With Quote
Old 03 July 2011, 19:31   #3
Member
 
Andy B's Avatar
 
Country: UK - England
Town: southampton
Length: 4m +
Join Date: Jul 2009
Posts: 342
Quote:
Originally Posted by soley1 View Post
got to be worth a go,i had a similar rib in the same condition(valiant d300)spent a few pounds and i have a useble craft
yah but £400
best fire up that motor before you hand over any money
__________________
Andy B is offline   Reply With Quote
Old 03 July 2011, 19:40   #4
Member
 
havener's Avatar
 
Country: UK - England
Town: Essex
Boat name: Cetacean Protector
Make: Plasteco Milano
Length: 5m +
Engine: 75hp
Join Date: Feb 2006
Posts: 505
Have a punt.

My Humber had been out in the open for about 3 years before I found it (on a friend's farm) and the engine had been on it during that time as well. It was virtually green!

A good clean up, quick engine service and new impeller, it started second turn (60hp Johnson). Trailer was fit for one trip home only then replaced.

One small patch needed, and it's now been my workhorse for a number of years. Cost me a grand to buy then spent about another £300 plus the trailer.

Don't try and fire up the engine without checking it over first though.
__________________
havener is offline   Reply With Quote
Old 03 July 2011, 19:51   #5
Member
 
Bigmuz7's Avatar
 
Country: UK - Scotland
Town: Glasgow
Boat name: stramash
Make: Tornado
Length: 5m +
Engine: Etec 90
Join Date: Feb 2006
Posts: 5,090
I wouldnt .. not where the sea is up your way fella.. depends on your attitude though .. some folks are gung ho enough and best of luck to them with much respect, but I'd sooner stick my mulah in something fresher than that, that I know I could depend on with a capitol D
__________________
Bigmuz7 is offline   Reply With Quote
Old 03 July 2011, 20:00   #6
Member
 
Country: UK - England
Length: 3m +
Join Date: Aug 2010
Posts: 31
Quote:
Originally Posted by Andy B View Post
yah but £400
best fire up that motor before you hand over any money
he said around £400,ive seen consoles go for £100 and control boxes too,the tube can be repaired if its only a small rip in a easy to get to place.a knackered engine sold as bits and he wouls soon recoup his money
just my opinion
__________________
soley1 is offline   Reply With Quote
Old 03 July 2011, 20:06   #7
Member
 
Country: UK - Scotland
Town: Thurso
Make: Gemini Zapcat
Length: 4m +
Engine: Tohatsu 50hp
Join Date: Jun 2006
Posts: 106
Send a message via MSN to bobbyjoeufb
Quote:
Originally Posted by Bigmuz7 View Post
I wouldnt .. not where the sea is up your way fella.. depends on your attitude though .. some folks are gung ho enough and best of luck to them with much respect, but I'd sooner stick my mulah in something fresher than that, that I know I could depend on with a capitol D
Yeah I know what you mean. Would not be venturing far just a play thing. Although I have just been told that the engine may be seized. Had a look at the engine earier today and flywheel did move slighty, could really do with getting it set up outside and have a good look over.
__________________
RYA Powerboat Instructor
bobbyjoeufb is offline   Reply With Quote
Old 04 July 2011, 06:57   #8
Member
 
Andy B's Avatar
 
Country: UK - England
Town: southampton
Length: 4m +
Join Date: Jul 2009
Posts: 342
Quote:
Originally Posted by soley1 View Post
he said around £400,ive seen consoles go for £100 and control boxes too,the tube can be repaired if its only a small rip in a easy to get to place.a knackered engine sold as bits and he wouls soon recoup his money
just my opinion
This is all very true,
But the OP did ask if it was worth doing up or bining!
Not can i buy this and get my money back!
__________________
Andy B is offline   Reply With Quote
Old 04 July 2011, 07:55   #9
Member
 
biffer's Avatar
 
Country: UK - England
Town: swanwick/hamble
Boat name: stormchaser
Make: custom rib
Length: 8m +
Engine: inboard/diesel
Join Date: Aug 2007
Posts: 3,848
if you've got the money give it a go, if you bugger it up you've had £400 of experience
__________________
biffer is offline   Reply With Quote
Old 04 July 2011, 07:57   #10
Member
 
Country: UK - England
Town: Sussex
Boat name: Bombard
Make: Aerotec 380
Length: 3m +
Engine: Mercury Mariner 15hp
Join Date: Jul 2010
Posts: 3,401
That looks like a whole heap of hassle for very little return IMHO - maybe £200 to take if off his hands but not £400...
__________________
Max... is offline   Reply With Quote
Old 04 July 2011, 09:20   #11
Member
 
Country: UK - England
Town: sheffield
Make: zodiac gt II
Length: 4m +
Engine: outboard
Join Date: Apr 2011
Posts: 53
with a good scrub down and some treatment on the tubes maybe a lick of paint to the hull that would look great ... get some soapy liquied or water on those tubes see how damaged they realy are ...watch for the bubbles lol
renegade is offline   Reply With Quote
Old 04 July 2011, 17:06   #12
Member
 
Country: UK - England
Town: Dartmouth
Boat name: TIDEL III
Make: AVON SEARIDER
Join Date: Jun 2003
Posts: 823
if it doesnt need new tubes now it soon will
__________________
paul tilley is offline   Reply With Quote
Old 04 July 2011, 18:50   #13
Member
 
Country: UK - England
Town: sheffield
Make: zodiac gt II
Length: 4m +
Engine: outboard
Join Date: Apr 2011
Posts: 53
maybe so but its going to be no real loss the console and outboard would make most of the money back . I seen boats like that left out for a year green as a field and a day later with a bit of tlc are like new and worth double the money . that with a good scrub and a bit of shine back on the tubes and you would be saying wow what a bargain...

just look at this restoration alone Inflatable Boat Paint and Tuff-coat paint for Inflatable Boats by SRC Tuff-coat and Tuffcoat
renegade is offline   Reply With Quote
Old 04 July 2011, 20:09   #14
Member
 
Nasher's Avatar
 
Country: Other
Town: Principalite d'Chaos
Boat name: The Nashers Revenge!
Make: Windsor Brothers
Length: 6m +
Engine: Optimax 225
MMSI: "Mmmmm SI" she said!
Join Date: Jan 2004
Posts: 4,828
If you can get him down to @£300 I'd say it's worth having a go.
It would be an enjoyable project with a reasonable starting point.

If the engine is shot, then part it out on ebay and recover some of the outlay ready to invest in a newer engine.

There is nothing like having built/rebuilt the boat yourself to know exactly where to look and what to do if something does go wrong.

Oh, put a budget together for rebuilding it, then double it.

Nasher.
__________________
Nasher is offline   Reply With Quote
Old 04 July 2011, 21:05   #15
RIBnet supporter
 
yoyo's Avatar
 
Country: UK - England
Town: Warrington/Anglesey
Make: Menai 480SR.
Length: 4m +
Engine: Tohatsoooooooo 70hp
Join Date: Sep 2005
Posts: 665
bin it
__________________
Yoyo.
---------------------------------------------------
life's full of ups "n" downs.
yoyo is offline   Reply With Quote
Old 04 July 2011, 21:11   #16
RIBnet supporter
 
yoyo's Avatar
 
Country: UK - England
Town: Warrington/Anglesey
Make: Menai 480SR.
Length: 4m +
Engine: Tohatsoooooooo 70hp
Join Date: Sep 2005
Posts: 665
Quote:
Originally Posted by renegade View Post
I seen boats like that left out for a year green as a field and a day later with a bit of tlc are like new and worth double the money . that with a good scrub and a bit of shine back on the tubes and you would be saying wow what a bargain...

just look at this restoration alone Inflatable Boat Paint and Tuff-coat paint for Inflatable Boats by SRC Tuff-coat and Tuffcoat
erm are you aware of Mr Paul Tilley's expertise on all things to do with toobs
__________________
Yoyo.
---------------------------------------------------
life's full of ups "n" downs.
yoyo is offline   Reply With Quote
Old 04 July 2011, 21:16   #17
Member
 
Country: UK - England
Town: sheffield
Make: zodiac gt II
Length: 4m +
Engine: outboard
Join Date: Apr 2011
Posts: 53
Quote:
Originally Posted by yoyo View Post
erm are you aware of Mr Paul Tilley's expertise on all things to do with toobs
regardless of how much some one knows he can not say how bad it is from those pic,s
also there is a outboard that may be ok and woth £250 or even more and the consoles are not cheap and with a spary would look new ..

some ppl love to give a old boat a bit of life back as I do and dont wish to spend 10k on a new one .

I see life in that old boat and for little money could be a few years fun to have

also did you look at the link ?
renegade is offline   Reply With Quote
Old 04 July 2011, 22:37   #18
Member
 
Country: UK - Scotland
Town: Thurso
Make: Gemini Zapcat
Length: 4m +
Engine: Tohatsu 50hp
Join Date: Jun 2006
Posts: 106
Send a message via MSN to bobbyjoeufb
Thanks for your comments.

Narrowly missed out on a nice Zapcat Hull and trailer tonight

Going to try and lower the price on the Valiant, see what I can get it for.
__________________
RYA Powerboat Instructor
bobbyjoeufb is offline   Reply With Quote
Old 04 July 2011, 22:41   #19
Member
 
Bigmuz7's Avatar
 
Country: UK - Scotland
Town: Glasgow
Boat name: stramash
Make: Tornado
Length: 5m +
Engine: Etec 90
Join Date: Feb 2006
Posts: 5,090
Quote:
Originally Posted by bobbyjoeufb View Post
Thanks for your comments.

Narrowly missed out on a nice Zapcat Hull and trailer tonight

Going to try and lower the price on the Valiant, see what I can get it for.
£0 and it will still cost you £lots .. burst my bubble in a year and tell me you flogged it for a profit go on then .. I await the report
__________________
Bigmuz7 is offline   Reply With Quote
Old 06 July 2011, 12:24   #20
Member
 
Country: Ireland
Town: London
Boat name: N/A
Length: no boat
Join Date: Apr 2006
Posts: 40
Send a message via MSN to boomer
If it was nearer I would have taken it for a project for the scouts (granted i probably would have been the one doing 99% of the work!)
__________________
boomer is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off




All times are GMT. The time now is 20:16.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.