Reply
 
Thread Tools Search this Thread
 
Old 20 September 2007, 21:40   #1
Member
 
gtflash's Avatar
 
Country: UK - England
Town: southampton
Boat name: TOP CAT 2
Make: Scorpion 8.1
Length: 8m +
Engine: 250hp HO
Join Date: Aug 2003
Posts: 1,318
tube go fast stripes

Wanna remove some blue go fast stripes from the tubes and replace with black. Problem is they grow from above the rubbing strake (so start under it). Will it be possible to remove bits of the strake and refit once the new colour sceme is done. If not if anyone can quote me to remove 4m stripe that would be great
__________________

__________________
gtflash is offline   Reply With Quote
Old 21 September 2007, 04:03   #2
Member
 
ribraff's Avatar
 
Country: UK - England
Town: Dartmouth
Length: 6m +
Join Date: Feb 2003
Posts: 1,209
Ususally the stripe will only go down a certain way beneath the strake, it is possible to pull the strake up with a heatgun to gain access to the bottom of the patch and remove/replace it, when you put the new one on make sure that the part sitting underneath the rubbing strake is sanded.
__________________
ribraff is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off





Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -5. The time now is 05:16.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.