Reply
 
Thread Tools Search this Thread
 
Old 18 November 2004, 18:45   #1
Member
 
Country: UK - Scotland
Make: HumberOceanOffshore
Length: 8m +
Engine: Volvo KAD300/DPX
Join Date: Oct 2002
Posts: 5,596
Tube cleaning....again

I know this has come up so many times but I've been doing a bit of tube cleaning today and it prompted me to post this.

There have been many products recommended but my expierience and the impression I get from the forum posts is that most of them either don't work or they require a considerable amount of elbow grease. I have, in the past, recommended standard thinners to wipe off the grime and hypalon haze but I got the impression it sounded, to some folk, too go to be true. So here's a wee pic of a strip which has simply been wiped over, no scrubbing necessary. It's the vertical bit.

Out of interest, the horizontal bit across the top was cleaned last June and it had Klear floor polish applied as a protection. It looks pretty well as good as it did when it was first applied. However, it has not been subjected to salt water. Don't ask me how come there are clean bits and dirty bits from last June!

-------
I see the children are playing again this evening.
Attached Thumbnails
Click image for larger version

Name:	Cleaned stripx500.jpg
Views:	592
Size:	20.2 KB
ID:	9166  
__________________
JW.
jwalker is offline   Reply With Quote
Old 18 November 2004, 18:55   #2
Member
 
Country: UK - England
Town: london
Boat name: Frances May
Make: vailant DR450
Length: 4m +
Engine: mercury 50 hp
Join Date: Sep 2003
Posts: 761
Send a message via Yahoo to Daniel TD5
so how do you get rid of sponge bobs mates that have been liveing on the under side of my rib tubes when the last owner left it on a mooring
for eighteen months i have lots of little back marks

i have tryed rib shine ibs cleaner elbow grease its not coming off yet

whats that stuff manos used again
__________________
GET A RIB GET A LIFE
Daniel TD5 is offline   Reply With Quote
Old 18 November 2004, 22:20   #3
Member
 
Country: UK - England
Town: Manchester - Abersoc
Boat name: MeMe
Make: SeaPro 595CC
Length: 6m +
Engine: Mercury 115 4S
Join Date: Jul 2003
Posts: 1,684
Send a message via MSN to MeMe
It seems to have worked well...........

...........I'll give it a try, however, that just looks like surface dirt to me not hard, ground in filth following a winters lay up on the hard. Anyway, I'm sure it's a damn sight cheaper than the stuff I advise people to use at near enough £15 a litre.
__________________
Buy it & Use it, then sell it and buy something bigger
MeMe is offline   Reply With Quote
Old 18 November 2004, 22:45   #4
Member
 
Country: UK - Scotland
Town: Edinburgh
Boat name: Iande
Make: Zodiac 6.5 pro open
Length: 6m +
Engine: Evinrude 150 + Johns
Join Date: Sep 2004
Posts: 43
Told weakened 'Jif' works well.
__________________
Soupy is offline   Reply With Quote
Old 19 November 2004, 08:22   #5
Member
 
Country: UK - England
Town: Southampton
Boat name: SMH Rib / War Shot
Make: Ribtec / Scorpion
Length: 4m +
Engine: 100hp Yam/150hp opt
Join Date: Sep 2003
Posts: 2,069
RIBase
Standard Thinners?

Quote:
Originally Posted by jwalker
I have, in the past, recommended standard thinners to wipe off the grime and hypalon haze but I got the impression it sounded, to some folk, too go to be true. So here's a wee pic of a strip which has simply been wiped over, no scrubbing necessary. It's the vertical bit.
Hi John,

That looks like a good result but forgive my ignorance, what exactly is standard thinners?

White spirit
Acetone
Meths
Petrol
Cellulose thinners
Toluoene (sp?)

I have used "RIB Revive" and had very good results - this smells a bit chemical so i guess has some type of solvent / thinners in it.

Regards
__________________
Searider is offline   Reply With Quote
Old 19 November 2004, 15:41   #6
Member
 
Country: UK - Scotland
Make: HumberOceanOffshore
Length: 8m +
Engine: Volvo KAD300/DPX
Join Date: Oct 2002
Posts: 5,596
Quote:
Originally Posted by Searider
...what exactly is standard thinners?
It's cellulose thinners. It is sometimes referred to a gun wash because that is the sort of general use is has. It can be used for spray painting if the weather is warm but it tends to bloom if the atmosphere is damp. I call it standard thinners because that's what it says in the tin.

It can be got from auto paint suppliers and some motorfactors. It usually costs me about 10 cwid something plus the vat for a 25ltr tin.

It has all sorts of uses: use with 60 grit to prepare hypalon for glueing, use to remove grease stains from clothing, use as a cleaning agent before painting or re-gelcoating your deck ( ), use for resin brush cleaning...I much prefer it to acetone, use to remove nail polish (), use to soften old paint and glue brushes, etc., etc.
__________________
JW.
jwalker is offline   Reply With Quote
Old 20 November 2004, 10:43   #7
Member
 
Country: UK - England
Town: Southampton
Boat name: SMH Rib / War Shot
Make: Ribtec / Scorpion
Length: 4m +
Engine: 100hp Yam/150hp opt
Join Date: Sep 2003
Posts: 2,069
RIBase
Thanks John
__________________
Searider is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off




All times are GMT. The time now is 19:12.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.