Transom drain fitting.

[Searider]

Evening all,

Trying to source a plastic transom drain fitting.

Have seen a photo of what I need but can't seem to find one.

Its a circular plastic fitting, black, four screw holes on the flange and a single central hole about 10mm or 12mm bore.

Any suggestions?

[Mollers]

Originally Posted by Searider

Evening all,

Trying to source a plastic transom drain fitting.

Have seen a photo of what I need but can't seem to find one.

Its a circular plastic fitting, black, four screw holes on the flange and a single central hole about 10mm or 12mm bore.

Any suggestions?

Why plastic? Fit a nice stainless item.

[Searider]

It's to replicate, and test, the set up on an existing boat.

[LeewayComposite]

hi searider,

I have had the items you are after in stock before but cant remember where we got them from and just looked through all parts books and cant find any,
I am wondering if they are hard to get hold of now?

can you not bond a plastic pipe in the hole leave slightly longer than needed. and sleeve with neoprene or hypalon sock, to make the drain trunk?

hope this helps

[shoestring]

I bought one of these of ebay recently item no. 4000100077752 if this is what you're looking for? sorry i don't know how to put a fancy link in but hopefully somebody will?

regards AL

[Searider]

Originally Posted by gunrunner

I bought one of these of ebay recently item no. 4000100077752 if this is what you're looking for? sorry i don't know how to put a fancy link in but hopefully somebody will?

regards AL

Hi Al,

That item number doesn't work?

Regards



Duncan

[jefflee2k]

Try this

http://www.western-marine.com/Inflat...ccessories.htm

[shoestring]

[QUOTE=Searider;370896] Hi Al,

That item number doesn't work?

Regards



Duncan

[Sorry too many 000's try 4001000777752 regards AL ]