Reply
 
Thread Tools Search this Thread
 
Old 21 May 2013, 19:07   #321
Member
 
ashbypower's Avatar
 
Country: UK - England
Town: Salisbury
Boat name: Blue C
Make: XS 600
Length: 6m +
Engine: 125hp Opti
MMSI: 235082826/235909566
Join Date: Jan 2004
Posts: 1,439
As AH says above cannot get figures for the uk, however to try and put killcord fatalities in perspective here are diving (SCUBA) fatalities over the past couple of years~:
2013 ----- 5
2012------16
2011------12

not seen any petitions about people diving!!!
The RNLI were called out 8321 time last year..... not many for lack of kill cords I would guess !!
__________________
Brian C
APS Marine Centre
ashbypower is offline   Reply With Quote
Old 21 May 2013, 19:12   #322
Member
 
Country: UK - England
Length: 3m +
Join Date: Sep 2008
Posts: 2,760
Thought someone quotes 19 fatalities in 10 years?

Difference between SCUBA and Ribbing is people expect there to be an inherint risk of diving. People thinking going for a drive in a boat should be safe beacuse you are on the water not in it.

I suspect if there was a bit of red curly string that could reduce the scuba fatalities there would be a campaign! I think thats the crux of the reason its SO emotive - there is technology that prevents the issue beign serious yet its not beign used all the time.
__________________
ShinyShoe is online now   Reply With Quote
Old 21 May 2013, 19:16   #323
Member
 
ashbypower's Avatar
 
Country: UK - England
Town: Salisbury
Boat name: Blue C
Make: XS 600
Length: 6m +
Engine: 125hp Opti
MMSI: 235082826/235909566
Join Date: Jan 2004
Posts: 1,439
I have qouted from the BSAC website, which covers all agencies in the UK!!
There is to a degree an equvilent to the red cury cord........ two infact....dive tables and Computers........
__________________
Brian C
APS Marine Centre
ashbypower is offline   Reply With Quote
Old 21 May 2013, 19:18   #324
RIBnet supporter
 
C2 RIBS's Avatar
 
Country: UK - England
Town: Hants
Length: 8m +
Engine: 300hp plus
Join Date: Sep 2007
Posts: 3,072
Quote:
Originally Posted by chris.moody View Post
I'll check Kevin's Yamaha next week. How do you disengage the neutral lock after engaging it?
Chris the lock is on the left side of throttle base,blue light then flashes , just put throttle forward slightly does not increase revs until further up. To re engage drop back to neutral spot and then you can work as usual, worthwhile with clients on board whilst doing mooring lines before leaving or switching off
__________________
C2 RIBS is offline   Reply With Quote
Old 21 May 2013, 19:29   #325
Member
 
Anchorhandler's Avatar
 
Country: France
Town: Huisnes sur Mer
Boat name: Raufoss
Make: Avon
Length: 4m +
Engine: Mercury 50
Join Date: Sep 2010
Posts: 789
Quote:
Originally Posted by ShinyShoe View Post
Difference between SCUBA and Ribbing is people expect there to be an inherint risk of diving. People thinking going for a drive in a boat should be safe beacuse you are on the water not in it.
I hate to play devil's advocate here but TBH, i feel quite the opposite.

I have a PADI open water certificate and feel that (Ahem...with the training i recieved ) the risks with scuba diving are inferior to that of travelling at speed in an open top boat whilst surrounded by other boats travelling at similar speeds .

I'm sure i could go over the USCG statistics and find other tragic accidents that could of easily been avoided but the point i was trying to make is that given the number of people who take to the water ieach day both oversea's and here in the UK (irrespective of whether they are, or are not wearing the KC) the number of injuries and fatalaties caused by prop/vessel strikes is actually incredibly low.

Simon
__________________
C'est pas l'homme qui prend la mer, c'est la mer qui prend l'homme....
Anchorhandler is offline   Reply With Quote
Old 21 May 2013, 19:44   #326
RIBnet Supporter
 
willk's Avatar
 
Country: Ireland
Length: 4m +
Join Date: Feb 2008
Posts: 14,679
Quote:
Originally Posted by Anchorhandler View Post
As i said, these are US figures but based on the amout of people who take to the water over there, i would be surprised if the UK figures were any higher.

Perhaps its time for people to start putting the Padstow accident into perspective?

Simon
There have been some cases in Ireland over the past few years. One poor lad lost his arm last year: Marine Casualty Investigation Board. There was one involving four PAX a few years before that: Capsized boat in Galway Bay « Doolin Coast Guard.

It does happen.
__________________
willk is offline   Reply With Quote
Old 21 May 2013, 20:03   #327
Member
 
chris.moody's Avatar
 
Country: UK - England
Town: Daventry & Beaulieu
Boat name: Tigga2
Make: Ribcraft 4.8
Length: 4m +
Engine: Honda BF50
MMSI: 235900806
Join Date: Jun 2011
Posts: 984
RIBase
Quote:
Originally Posted by C2 RIBS View Post

Chris the lock is on the left side of throttle base,blue light then flashes , just put throttle forward slightly does not increase revs until further up. To re engage drop back to neutral spot and then you can work as usual, worthwhile with clients on board whilst doing mooring lines before leaving or switching off
Thanks Ian, sounds much better than keep shutting down and re starting the engine when leaving the helm to do lines, fenders, etc.
__________________
--
Chris Moody
Rib Tigga2 a Ribcraft 4.8 with a Honda BF50
chris.moody is offline   Reply With Quote
Old 21 May 2013, 20:04   #328
Member
 
Anchorhandler's Avatar
 
Country: France
Town: Huisnes sur Mer
Boat name: Raufoss
Make: Avon
Length: 4m +
Engine: Mercury 50
Join Date: Sep 2010
Posts: 789
Quote:
Originally Posted by willk View Post
There have been some cases in Ireland over the past few years. One poor lad lost his arm last year: Marine Casualty Investigation Board. There was one involving four PAX a few years before that: Capsized boat in Galway Bay « Doolin Coast Guard.

It does happen.
Yes it does, so lets add the number of people who take to the water in Ireland into the US/UK statistics. Im sure the percentage ratio of prop strikes per number of hours spent on the water will drop even further.

Sorry Wiilk but the argument here is that death or serious injury as a direct result of not wearing the KC is actually very rare therefore not justifying legislation/regulation etc...

In the first example you listed, the poor bloke admitted that he set out to sea with a defective KC system hence the reason he didnt wear it. If the KC system was operational, would he have used it? He was an experienced powerboater so i would like to think so.

In the second example no person was injured and the boat was later found on a beach.

Simon
__________________
C'est pas l'homme qui prend la mer, c'est la mer qui prend l'homme....
Anchorhandler is offline   Reply With Quote
Old 07 June 2013, 14:30   #329
Member
 
Country: UK - England
Town: West Sussex
Length: no boat
Join Date: Oct 2002
Posts: 3,872
Quote:
Originally Posted by 250kts View Post
If HMS and the magazine get the stickers printed, I will take a job lot and personnaly see that they are given out to all the local boat yards, dry stacks and slip ways in Poole.

I have even made up my own, laminated it and it will be on our RIB tomorrow. Part of our crew's role has always been to check that the skipper is clipped in.

Steve
I have today received a batch of stickers from Powerboat & RIB magazine and will for sure put the first one on my demo rib and on other ribs sold by us. I like the sticker . It is waterproof as it should be and the fact that is says on the bottom : "Supplied by Powerboat & Rib magazine" does not bother me one little bit. Somebody had to take the initiative. Well done HMS

Steve I can post some to you if you want any
__________________
Andre
Andre is offline   Reply With Quote
Old 07 June 2013, 16:42   #330
RIBnet supporter
 
C2 RIBS's Avatar
 
Country: UK - England
Town: Hants
Length: 8m +
Engine: 300hp plus
Join Date: Sep 2007
Posts: 3,072
Quote:
Originally Posted by Andre View Post
I have today received a batch of stickers from Powerboat & RIB magazine and will for sure put the first one on my demo rib and on other ribs sold by us. I like the sticker . It is waterproof as it should be and the fact that is says on the bottom : "Supplied by Powerboat & Rib magazine" does not bother me one little bit. Somebody had to take the initiative. Well done HMS

Steve I can post some to you if you want any
Marinas at MDL have them also, fitted yesterday
__________________
C2 RIBS is offline   Reply With Quote
Old 08 June 2013, 08:44   #331
Member
 
Country: Other
Town: Stanley, Falkland Is
Boat name: Seawolf
Make: Osprey Vipermax 5.8
Length: 5m +
Engine: Etec 150
Join Date: Mar 2006
Posts: 3,726
Quote:
Originally Posted by Andre View Post
I have today received a batch of stickers from Powerboat & RIB magazine and will for sure put the first one on my demo rib and on other ribs sold by us. I like the sticker . It is waterproof as it should be and the fact that is says on the bottom : "Supplied by Powerboat & Rib magazine" does not bother me one little bit. Somebody had to take the initiative. Well done HMS
Good stuff

If it saves somebody's face being rotavated, I don't care about a line of advertising. I'll hopefully be getting one with my next issue, and it will be going on the boat, though in reality it's rarely anybody but me at the helm anyway and I'm always there.
__________________
A Boat is a hole in the water, surrounded by fibreglass, into which you throw money...

Sent from my Computer, using a keyboard and mouse
BogMonster is offline   Reply With Quote
Old 27 June 2013, 15:29   #332
Member
 
Country: USA
Town: Oklahoma USA
Length: no boat
Join Date: May 2013
Posts: 36
UK Kill Cord / Prop Safety Interactive Timeline

Last night we posted an interactive timeline for the last couple years of UK boat kill cord and propeller safety related events, accidents, and developments. It graphically shows the intensity of interest following the Milligan accident. The interactive timeline is best viewed on a desktop computer or laptop with a large screen.

UK Boat Kill Cord & Propeller Safety Interactive Timeline :: Propeller Guard Information Center

gary
__________________
PGIC is offline   Reply With Quote
Old 27 June 2013, 15:40   #333
Member
 
Country: UK - England
Town: Bristol
Make: Ribcraft
Length: 5m +
Engine: Yamaha
Join Date: May 2006
Posts: 4,299
I made sure AJ had a sticker by stickin it on his Console!
__________________
matt h is offline   Reply With Quote
Old 27 June 2013, 15:43   #334
AJ.
RIBnet supporter
 
AJ.'s Avatar
 
Country: UK - England
Town: Warwickshire
Boat name: Impulse
Make: Ribcraft
Length: 5m +
Engine: Suzuki 140
Join Date: Sep 2011
Posts: 1,020
Still there and will remain there
__________________
AJ. is offline   Reply With Quote
Old 27 June 2013, 23:55   #335
Member
 
HUMBER P4VWL's Avatar
 
Country: UK - Wales
Town: N Wales Chester
Boat name: Mr Smith
Make: Humber
Length: 6m +
Join Date: Feb 2009
Posts: 5,238
My daughter nicked mine, she LOVES stickers!!!

It's now stuck on her doll.

Educate them young!
__________________
HUMBER P4VWL is offline   Reply With Quote
Old 28 June 2013, 01:07   #336
RIBnet admin team
 
Nos4r2's Avatar
 
Country: UK - England
Town: The wilds of Wiltshire
Boat name: Dominator
Make: SR5.4
Length: 7m +
Engine: Yam 85
MMSI: 235055163
Join Date: Jul 2005
Posts: 13,054
RIBase
Does this mean you guys have had your copy of PB&R?
__________________
Need spares,consoles,consumables,hire,training or even a new boat?

Please click HERE and HERE and support our Trade Members.

Join up as a Trade member or Supporter HERE
Nos4r2 is offline   Reply With Quote
Old 28 June 2013, 07:10   #337
AJ.
RIBnet supporter
 
AJ.'s Avatar
 
Country: UK - England
Town: Warwickshire
Boat name: Impulse
Make: Ribcraft
Length: 5m +
Engine: Suzuki 140
Join Date: Sep 2011
Posts: 1,020
Quote:
Originally Posted by Nos4r2 View Post
Does this mean you guys have had your copy of PB&R?
Yeah last week. Did you not get the memo
__________________
AJ. is offline   Reply With Quote
Old 28 June 2013, 07:24   #338
Member
 
HUMBER P4VWL's Avatar
 
Country: UK - Wales
Town: N Wales Chester
Boat name: Mr Smith
Make: Humber
Length: 6m +
Join Date: Feb 2009
Posts: 5,238
Quote:
Originally Posted by Nos4r2 View Post
Does this mean you guys have had your copy of PB&R?
Fortnight ago
__________________
HUMBER P4VWL is offline   Reply With Quote
Old 28 June 2013, 07:51   #339
RIBnet admin team
 
Nos4r2's Avatar
 
Country: UK - England
Town: The wilds of Wiltshire
Boat name: Dominator
Make: SR5.4
Length: 7m +
Engine: Yam 85
MMSI: 235055163
Join Date: Jul 2005
Posts: 13,054
RIBase
Fairly obviously,mine hasn't arrived. I wonder why?
__________________
Need spares,consoles,consumables,hire,training or even a new boat?

Please click HERE and HERE and support our Trade Members.

Join up as a Trade member or Supporter HERE
Nos4r2 is offline   Reply With Quote
Old 28 June 2013, 08:28   #340
RIBnet Supporter
 
willk's Avatar
 
Country: Ireland
Length: 4m +
Join Date: Feb 2008
Posts: 14,679
Quote:
Originally Posted by Nos4r2 View Post
Fairly obviously,mine hasn't arrived. I wonder why?
Maybe it's gonna be delivered by one of those Black Helicopters hovering over your gaff.....

__________________
willk is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off




All times are GMT. The time now is 21:45.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.