Reply
 
Thread Tools Search this Thread
 
Old 31 March 2008, 12:45   #21
Member
 
Country: UK - England
Town: Brum
Boat name: UTV
Make: zodiac FR
Length: 3m +
Engine: 2 stroke 15hp
MMSI: 999
Join Date: May 2003
Posts: 535
Thanks for the replies. Some damage was present before but only a small amount, nothing to indicate such a failure would occur.
I suppose this experience will concentrate the mind when inspecting this particular area of any RIBs I may have or use in the future.
Tube pressure was hard.
I have emailed a tube repairer to see what type of wait/ cost a repair will incur.
Understand what advantages a hard nose has now, hmm Osprey....?
(p.s hope the johnny ard crew have not read this thread)
__________________
Big waves, small boat ;)
tinker is offline   Reply With Quote
Old 31 March 2008, 12:45   #22
Member
 
ribraff's Avatar
 
Country: UK - England
Town: Dartmouth
Length: 6m +
Join Date: Feb 2003
Posts: 1,220
Cut the T piece down to size and glue on to the flange above and below, i have just held this up to the flange on this rib to show what i mean, once you've done this you can replace the strips over the top, it's best to oversize them if ycan and use a heavier grade of fabric.
Attached Thumbnails
Click image for larger version

Name:	Image014.jpg
Views:	187
Size:	85.7 KB
ID:	33718   Click image for larger version

Name:	Image015.jpg
Views:	183
Size:	40.8 KB
ID:	33719  
__________________
ribraff is offline   Reply With Quote
Old 31 March 2008, 12:47   #23
Member
 
ribraff's Avatar
 
Country: UK - England
Town: Dartmouth
Length: 6m +
Join Date: Feb 2003
Posts: 1,220
By the way... this is a fairly famous Ribnet boat which is in for a bit of a restoration project... i will post pic's up as the work continues.
__________________
ribraff is offline   Reply With Quote
Old 02 April 2008, 03:08   #24
Member
 
Country: Australia
Town: Melbourne
Boat name: Duck Tales
Make: Avon S400
Length: 3m +
Engine: 15hp Tohatsu
Join Date: Mar 2008
Posts: 61
i did not realize damage like that could occur to a rib due to waves!? i was under the distinct impression that ribs were tough as nails and wave jumping and rough seas were manageable for them, apparently not so, perhaps ribs arent that tough? puts a whole new spin on things.
__________________
Clipper is offline   Reply With Quote
Old 02 April 2008, 11:25   #25
Member
 
Country: UK - Wales
Town: swansea
Boat name: Too Blue
Make: BLANK
Length: 8m +
Engine: Suzuki DT225
Join Date: Mar 2004
Posts: 12,791
Depends on the RIB - how it's driven and how rough you want to go - look at these!!!

http://www.boomeranger.fi/images/ind...conditions.mpg







http://www.zodiaccz7.com/images1/video/cz7medium.wmv
__________________
codprawn is offline   Reply With Quote
Old 02 April 2008, 18:18   #26
Member
 
Hightower's Avatar
 
Country: UK - England
Town: Fareham
Length: 6m +
Join Date: Sep 2003
Posts: 7,866
And lets not forget what happened to Spirit when She tried to cross the Atlantic.
__________________
Andy

Looks Slow but is Fast
Member of the ebay Blue RIB cover club.
Hightower is offline   Reply With Quote
Old 03 April 2008, 02:36   #27
Member
 
Country: Canada
Town: Vancouver, BC
Make: Hopefully a Polaris
Length: no boat
Join Date: Mar 2008
Posts: 13
Quote:
Originally Posted by Hightower View Post
And lets not forget what happened to Spirit when She tried to cross the Atlantic.
For those new to the scene. What happened?
__________________
Squish is offline   Reply With Quote
Old 03 April 2008, 08:43   #28
Member
 
Pete7's Avatar
 
Country: UK - England
Town: Gosport
Boat name: April Lass
Make: Moody 31
Length: 9m +
Join Date: Aug 2001
Posts: 4,951
It sank.

However to be fair she had gone around the world first, and a few shorter trips around Europe. The end came when she dropped into a huge hole and destroyed the bow.

http://rib.net/forum/showthread.php?...hlight=airline

Pete
__________________
.
Ribnet is best viewed on a computer of some sort
Pete7 is offline   Reply With Quote
Old 03 April 2008, 23:20   #29
Member
 
Country: Australia
Town: Melbourne
Boat name: Duck Tales
Make: Avon S400
Length: 3m +
Engine: 15hp Tohatsu
Join Date: Mar 2008
Posts: 61
those videos are amazing, but i wonder how long they will last if used in that manner? i am still very surprised that a bow can tear off, ribs are so versatile, but perhaps not that tough (for standard models available to the public)? though a mate did just but an 5m ex-navy duck which he claims is bullet proof...
__________________
Clipper is offline   Reply With Quote
Old 03 April 2008, 23:37   #30
RIBnet admin team
 
Nos4r2's Avatar
 
Country: UK - England
Town: The wilds of Wiltshire
Boat name: Dominator
Make: SR5.4
Length: 7m +
Engine: Yam 85
MMSI: 235055163
Join Date: Jul 2005
Posts: 13,054
RIBase
Quote:
Originally Posted by Clipper View Post
those videos are amazing, but i wonder how long they will last if used in that manner? i am still very surprised that a bow can tear off, ribs are so versatile, but perhaps not that tough (for standard models available to the public)? though a mate did just but an 5m ex-navy duck which he claims is bullet proof...

If you went out in a hardboat and did what tore the bow tube,you'd be calling for the lifeboat and your boat would be sunk.
__________________
Need spares,consoles,consumables,hire,training or even a new boat?

Please click HERE and HERE and support our Trade Members.

Join up as a Trade member or Supporter HERE
Nos4r2 is offline   Reply With Quote
Old 04 April 2008, 08:48   #31
Member
 
Jono's Avatar
 
Country: UK - England
Town: Over here
Boat name: S.S. Nobstick
Make: Three Wise Monkeys
Length: 3m +
Engine: 44lbs of thrust....
Join Date: Nov 2003
Posts: 2,127
Quote:
Originally Posted by Nos4r2 View Post
If you went out in a hardboat and did what tore the bow tube,you'd be calling for the lifeboat and your boat would be sunk.

Careful Nos, you're beginning to sound like a Rib Nobba.. all "gung-ho" and Bowie knife between the teeth..... Surely you've seen hard boats stuff and recover...ask Matt... all he did was bite the dash..and carried on racing?

Also you're no doubt aware of the various cases of ribs having their tubes ripped off in a good stuff too.....I, of course, refuse to acknowledge any bow-rider style boat as a hard boat.. They are truly the Devil's Spawn...
__________________
Jono is offline   Reply With Quote
Old 04 April 2008, 10:15   #32
RIBnet admin team
 
Nos4r2's Avatar
 
Country: UK - England
Town: The wilds of Wiltshire
Boat name: Dominator
Make: SR5.4
Length: 7m +
Engine: Yam 85
MMSI: 235055163
Join Date: Jul 2005
Posts: 13,054
RIBase
Quote:
Originally Posted by Jono View Post
Careful Nos, you're beginning to sound like a Rib Nobba.. all "gung-ho" and Bowie knife between the teeth..... Surely you've seen hard boats stuff and recover...ask Matt... all he did was bite the dash..and carried on racing?

Also you're no doubt aware of the various cases of ribs having their tubes ripped off in a good stuff too.....I, of course, refuse to acknowledge any bow-rider style boat as a hard boat.. They are truly the Devil's Spawn...

You know you're right, smartarse

The point I was trying to make though is that ribs are far tougher than Clipper is thinking. There's no such thing as foolproof though.
__________________
Need spares,consoles,consumables,hire,training or even a new boat?

Please click HERE and HERE and support our Trade Members.

Join up as a Trade member or Supporter HERE
Nos4r2 is offline   Reply With Quote
Old 04 April 2008, 18:36   #33
Member
 
Country: UK - Wales
Town: swansea
Boat name: Too Blue
Make: BLANK
Length: 8m +
Engine: Suzuki DT225
Join Date: Mar 2004
Posts: 12,791
Quote:
Originally Posted by Clipper View Post
those videos are amazing, but i wonder how long they will last if used in that manner? i am still very surprised that a bow can tear off, ribs are so versatile, but perhaps not that tough (for standard models available to the public)? though a mate did just but an 5m ex-navy duck which he claims is bullet proof...
Well many Avons have been abused by the military for 20 years and are still going strong!!!

http://www.mustangmarine.com/ribwork...olio/index.htm

These boats are seriously tough and will withstand all sorts of abuse.
__________________
codprawn is offline   Reply With Quote
Old 04 April 2008, 18:38   #34
Member
 
Country: UK - England
Town: Enfield/Switzerland
Boat name: Zonneschijn II/Vixen
Make: Shakespeare/Avon
Length: 7m +
Engine: Evin' 175 DI /Yam 90
MMSI: 235055605
Join Date: May 2006
Posts: 1,436
Quote:
Originally Posted by Nos4r2 View Post
There's no such thing as foolproof though.
As king of stuffing, does that make you a fool???
__________________
Neil Harvey is offline   Reply With Quote
Old 06 April 2008, 10:29   #35
RIBnet admin team
 
Nos4r2's Avatar
 
Country: UK - England
Town: The wilds of Wiltshire
Boat name: Dominator
Make: SR5.4
Length: 7m +
Engine: Yam 85
MMSI: 235055163
Join Date: Jul 2005
Posts: 13,054
RIBase
Quote:
Originally Posted by Neil Harvey View Post
As king of stuffing, does that make you a fool???
No... Aint broken one yet

Besides,I haven't stuffed one for over a year now.
__________________
Need spares,consoles,consumables,hire,training or even a new boat?

Please click HERE and HERE and support our Trade Members.

Join up as a Trade member or Supporter HERE
Nos4r2 is offline   Reply With Quote
Old 07 April 2008, 11:28   #36
Member
 
Country: Australia
Town: Melbourne
Boat name: Duck Tales
Make: Avon S400
Length: 3m +
Engine: 15hp Tohatsu
Join Date: Mar 2008
Posts: 61
"The point I was trying to make though is that ribs are far tougher than Clipper is thinking."

i hope so,

i guess when it is time to eventually upgrade i will really have to do my homework on which RIB is most suited to the abuse i intend on giving it, probably just start off with a couple of slaps when it mouths off and really give it a good beating if the diving is no good.

is a tear in the bow something that is considered common?
__________________
Clipper is offline   Reply With Quote
Old 07 April 2008, 15:35   #37
Member
 
biffer's Avatar
 
Country: UK - England
Town: swanwick/hamble
Boat name: stormchaser
Make: custom rib
Length: 8m +
Engine: inboard/diesel
Join Date: Aug 2007
Posts: 3,848
looks like you had some damage there before from hard impact, once it starts to tear it will go very easliy, take a look at the pic of my boat and that will stop you tearing it in the first place
Attached Thumbnails
Click image for larger version

Name:	bumper.jpg
Views:	213
Size:	36.4 KB
ID:	33864  
__________________
biffer is offline   Reply With Quote
Old 07 April 2008, 17:47   #38
Member
 
Country: UK - England
Town: Essex/Vendee
Boat name: shockwave,Voluntry 2
Make: Pac 22/ searider5.4
Length: 6m +
Engine: 180hp turbo,yam 90
Join Date: Nov 2004
Posts: 1,022
Biffer do you have that guard on to protect it from the pontoons etc or for strapping over tubes to anchor cleat
__________________
PeterR is offline   Reply With Quote
Old 07 April 2008, 17:48   #39
Member
 
Country: UK - England
Town: Essex/Vendee
Boat name: shockwave,Voluntry 2
Make: Pac 22/ searider5.4
Length: 6m +
Engine: 180hp turbo,yam 90
Join Date: Nov 2004
Posts: 1,022
Nice accessory though very good idea.
__________________
PeterR is offline   Reply With Quote
Old 07 April 2008, 22:36   #40
Member
 
Bigmuz7's Avatar
 
Country: UK - Scotland
Town: Glasgow
Boat name: stramash
Make: Tornado
Length: 5m +
Engine: Etec 90
Join Date: Feb 2006
Posts: 5,090
Quote:
Originally Posted by biffer View Post
looks like you had some damage there before from hard impact, once it starts to tear it will go very easliy, take a look at the pic of my boat and that will stop you tearing it in the first place
Sorry .. but when you bury the nose in some blue water a small bit of stainless is noo good !
__________________
Bigmuz7 is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off




All times are GMT. The time now is 02:16.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.